20261107 Plenum
From The Munich Maker Lab's Wiki
Topics for the Plenum
What are you currently working on?
- Phier: Doorlock
- Robert: Expanding is Centauri Carbon for multifilament
- David: Working on his Video Transcoder
- Mike: Nothing ATM
- ChrisK: Working on his advend Calendar
- William: Working on his board game
- Chris: Working on a DIY Steam Machine (like gaming)
- Valentin: Trying to not get killed by the toxic fumes from his own CO2 laser
- Michael: Designing his PCB, preparing an embedded rust workshop
- Jost: Lasercutting Lamps, reenabling network on the prusa minis
- Maggie: Social Media for the General Assembly
- Adrian: Getting used to my new car :)
- Milian: Car repair on his camper
Say thank you
- Philipp, Brett and Bira for their work on the doorlock
- Milian and Michael W. for ordering screws and refilling them into the drawers in the workshop
- Maggie for the Social media work and preparing the flyers mentioned last time
Projects & Groups update
This is a quick update from group meetings at our space, other long-term space projects (e.g., Lasercutter, CNC, etc.) or of the lab internal projects.
- Currently a Loomio poll is running to decide if we should buy a new small CNC machine. It runs until Sunday 15th November and can be found here: https://www.loomio.com/p/jKXAQT37/new-small-cnc-mill Please leave your vote!
- Dedicated projector box: I have set up a dedicated box containing one of our projectors, along with the adapters and cables. It is now in the demo shelf instead of far away on top of one of the storage boxes. This should make the projector setup easier to use, for example at our plenum meetings. --Milian
New donation couch for the lab?
We have the chance to get a leather couch set donated to the lab from an office clearance (Büroauflösung). This would be a good opportunity to replace our old white couch. Leather is easier to keep clean, and smaller modular elements make the living room more flexible and easier to access.
The couches still need to be transported to the lab. The plan is to rent a MILES transporter and, on the same trip, take the old couch to the recycling center.
The discussion took place in the #garage-sale channel, in the relevant thread. The office clearance may also offer other useful items, such as power strips (Mehrfachsteckdosen). This still needs to be clarified.
Requests:
- Approval to replace our current couch if we receive the leather couches shown in the picture.
- Reimbursement of up to €100 for the MILES transporter rental.
- Approved
-- Milian
Heating (how to)
The heating season is approaching, so here is a short reminder of how our heating works:
- We have two heaters, one at the front and one at the back of the space. Unfortunately, the workshop areas have no real heating option.
- You can switch on both heaters either through the Home Assistant dashboard or with the wall push button in the laser cube.
- You can adjust the power of each heater with its dedicated rotary knob. Settings 1 or 2 are usually enough.
- The back heater is in the laser cube. The front heater is on the wall between the storage boxes, as shown in the pictures.
Please note: Always check if the heaters turn off when you turn the "Space Status" to red when you leave the space. If they don't turn off you can do so via the home assistant dashboard or the push button. No need to turn the rotary knob to 0, it can stay on 1 or 2.
For more details, please check our wiki or ask here if something is not clear -- Milian
Heating (ceiling fans)
In the last winter season we discussed the possibility of installing ceiling fans to push the hot air down. I think it's worth to try this to get the Lab warmer. We can test it with one fan and see if it works.
Is there a group of people willing to take this task?
This means buying a suitable fan and installing it to the ceiling. -- Philipp
- No one jumped on the opportunity, we'll ask on slack :/
Doorlock - New way to access the Lab
There is now the possibility to enter the lab by opening the door rather than the entire roll-up gate. When the lab is closed, the procedure is as follows:
- Unlock the door with your RFID token as usual. The door will remain unlocked for 20 seconds.
- After these 20 seconds, you can no longer enter from outside. You can always exit from inside.
- “Space Status” green: the door is unlocked, and you can enter from outside.
- “Space Status” red: the door is locked, and you can only exit from inside.
At the moment there's a fallback in case the doorlock doesn't work. If you present your RFID token a second time within 3 minutes, the roll-up gate will open.
-- Philipp
Survey: Need for a parking lot
We might need to rent parking lots in the future. Let's get a first mood picture how we should continue with this picture. What is our demand? What could be a good solution long term?
-- Milian
Vorstand update
Info new lights on the Kreativlabor are
There will be more outdoor lights installed on the Kreativ Labor area to make it more secure. We did not get more information, where new lights will be installed exactly.
Request to limit members to one box per person and to set a grace period of two months.
Please note that we will need to sort out the member Euro boxes (the ones in the basement) more often in the future. Because our member count keeps growing, we have a long-term storage space problem. Everyone therefore needs to label their personal box properly, ideally with their first and last name, so we can compare it with the active member list. Boxes that we cannot match to a person on the active member list will also be sorted out.
In the past, two member boxes per person were allowed in the currently rented space. The wiki page Storage space already documents that only one member box is allowed per person. This rule probably came from a lack of space, but I couldn't find when it was decided in the decision list.
I therefore want to renew the decision. We are running out of space for member boxes because the number of active members keeps rising, even though we have extended the storage twice. For the moment, we need to limit boxes to one per person. We also need a realistic grace period ("Karenzzeit") for how long we store the boxes of non-active members, and of boxes we cannot match, after sorting them out and notifying them. I propose two months for now. An extension can be requested from the Board in case of extenuating circumstances.
- Approved
Please note that every member is informed on cancellation that they must take their box with them by the last day of their membership.
What would you like to change or to be changed? Anything you don't feel comfortable with within the space?
(After each plenum, please add approved changes with significant impact to our decision list so they are properly documented)
- Someone left this small blue vacuum in the lab some time ago without any information. I don't think we need it, and we have no replacement filters for it. Let's sort it out and mark it as free to take. -- Milian
- We don't need it, it can go
- We recently received a lot of donations, including many old electronic devices and computers. Mohamed kindly took everything to the recycling center in two trips (thanks again for that!). One computer from that donation sat on the project pallet for quite a while and is now back in the living room, marked free to take. Blocking the pallet for so long isn't ideal and it would be nice if the disposal didn't fall to the community afterwards. It would be great if we all took care of disposing of our own project leftovers, for example by taking them to the recycling center ourselves. --Milian
- I would like to propose a monthly woman's night, aimed at bringing in new femme presenting people into the lab. This could be a night of simply sharing projects, giving tours, etc. There is a severe lack of women in the space, and I thinking bringing in and getting women involved would be a boon to the lab and the general atmosphere. Current idea is to begin this in January and see what the demand is. -- Maggie
- Approved
Things to Buy
(Per-plenum spending limit for purchases that belong together: 250€. Larger amounts go through a poll.
To get back your paid money send the invoice(s) to finance@munichmakerlab.de within 3 month. Extension of this time-frame needs to be approve by the Plenum beforehand. Make sure to have a separated invoice for Lab purchases)
- https://www.lidl.de/l/prospekte/aktionsprospekt-16-11-2026-21-11-2026-74972d/view/flyer/page/2?_ab=1&lf=HHZ Lidl will have a Dust Collector on sale the week after next week. It would be a good upgrade in terms of collection volume and airflow and it's an incredible deal
- 60€
- The airflow might be questionable if we reduce the tube diameter, if it doesn't suck (ha) we return it
- Approved
Stuff from the past
What was discussed at the last Plenum? What's the current status of those things? 20261031 Plenum
Get Involved
If you want to be mentioned at the previous section as well, one of the easiest ways is to take one of our MiniJobs or to get involved in one of our Lab Projects.
This is a great way to participate in the Munich Maker Lab and contributing time helps to keep our space in a good shape.
Current key topics looking for additional support:
...
Things for Newsletter, Social Media & Website News
Introduce Loomio poll
Request for online participation
If necessary, you can request to participate remotely (via jitsi). Please briefly describe why you want to participate remotely and what topic you want to discuss. (additionally to adding the topic on top!)
