Network: Difference between revisions
(→Allocated IP Addresses: remove Jorgen LED Panel (broken, nobody to fix it)) |
mNo edit summary |
||
| Line 68: | Line 68: | ||
| 10.10.20.90 || vpn-access || OpenVPN Gateway | | 10.10.20.90 || vpn-access || OpenVPN Gateway | ||
|- | |- | ||
| 10.10.20.91 || backup || Backup operator | | 10.10.20.91 || backup || [[Backup]] operator | ||
|- | |- | ||
| 10.10.20.150 || ewindow || [[Virtual Machines]] | | 10.10.20.150 || ewindow || [[Virtual Machines]] | ||
Revision as of 22:17, 11 October 2016
WiFi
- SSID: "munichmakerlab" or "munichmakerlab-5g"
- Security: WPA2 Personal. Preshared Key is written on the whiteboard.
- Mode: 802.11gn. No 802.11b. If you really really need to connect a 11Mbit/s only device, please talk to tiefpunkt
Hardware
2 LANCOM L-320agn Wireless Access Points [1], both manually configured (no WiFi controller)
- mumawireless01
- SSID "munichmakerlab"
- 2.4 Ghz
- Channel 1
- mumawireless02
- SSID "munichmakerlab" and "munichmakerlab-5g"
- 5Ghz
- Channel 108
Network Segment
- Subnetmask: 255.255.0.0
- Gateway: 10.10.0.1
- DNS-Server: 10.10.0.10
- DHCP-Server: 10.10.0.1
Allocated IP Addresses
| IP Address | Name | Description |
|---|---|---|
| 10.10.0.1 | Router | Router |
| 10.10.0.10 | ns1 | DNS server |
| 10.10.10.20-250 | DHCP Range | |
| 10.10.20.2 | FritzBox | VoIP Gateway (FritzBox 5050) |
| 10.10.20.10 | NyanPrint | Color Laser Printer |
| 10.10.20.25 | OctoPrint | OctoPrint |
| 10.10.20.31 | tokyo.local | LED-Panel eth0 |
| 10.10.20.32 | tokyo.local | LED-Panel wlan0 |
| 10.10.20.35 | - | x32 Mixer |
| 10.10.20.40 | heimdal | Door Lock RPi |
| 10.10.20.50 | PiPunkt | Space Status RPi |
| 10.10.20.61 | hawking | Fileserver |
| 10.10.20.62 | vmhost01 | Virtual Machines |
| 10.10.20.63 | localhorst | Virtual Machines |
| 10.10.20.64 | broker | Virtual Machines |
| 10.10.20.65 | vmhost02 | Virtual Machines |
| 10.10.20.66 | coreos10 | Docker Host |
| 10.10.20.67 | ILOvmhost03 | Virtual Machines |
| 10.10.20.68 | vmhost03 | Virtual Machines |
| 10.10.20.81 | LaserCutPC | LaserCutter |
| 10.10.20.82 | Terminal Server | ... |
| 10.10.20.90 | vpn-access | OpenVPN Gateway |
| 10.10.20.91 | backup | Backup operator |
| 10.10.20.150 | ewindow | Virtual Machines |
Not moved to new subnets yet
| 192.168.0.240 | wifi | WiFi Connection X350 3D Printer |
Getting a fixed IP address
If you need a fixed IP address, choose one that's not taken yet, and enter it in the table above. Done. There's currently no dedicated DNS, we'll tackle that eventually.
IPv6
We got native IPv6 \o/ IPv6 is broken, unfortunately. There is IPv6 on the Freifunk WiFi, if you really need it.
DNS
DNS is provided by a docker bind image (https://github.com/sameersbn/docker-bind).
- Internal zone is "intern.munichmakerlab.de", not all hosts are in there yet
- Server is maintained via Webmin, check http://www.damagehead.com/blog/2015/04/28/deploying-a-dns-server-using-docker/ for details
- Server is not configured in DHCP yet, requires some testing first
Hostnames
When setting up a new machine for the space, the machine should be named after a famous scientist or mathematician whose birthday is today or near today. Use the following list to avoid already used hostnames:
Used hostnames
| Hostname | Device Type | Location |
|---|---|---|
| Doppler | PC | Workplace 2 |
| Darwin | PC | Workplace 1 |
| Heisenberg | PC | Spacemonitor near the entrance |
Uplink
We are connected to the internet via a Telekom V-DSL connection.
VPN
You can connect to the lab remotely, via OpenVPN. If you need access, contact JanS.
