20191110 Space move 2019

Whats new?

• Network & Internet Severin
  • There will be a LAN cable from the distribution point to the new space
  • Nothing new besides that
• Electricity Nico
  • Demand has been collected from all leads.
  • We will not fulfil that to a 100% because it's just overkill.
  • 2 x CEE red
  • ~8 x Normal power sockets
  • 1 x CEE blue for our outdoor socket
• RecyclingCenter David
  • No news
• Storage Paul
  • No news
• Gaming&Relax AdrianM
  • Fusion 360 document has been created - Still some discussion needed - https://a360.co/2NLdjmU
• Electronics Paul and German
  • Still work in progress - Laser and 3D-printing room need to be finalised first to know the actual size.
• Workshop Bernhard
  • Bernhard wasn't there.
  • Nico invested some brainpower and found three possible ways for the walls:
  • Possible to walk on ~1300€ without insulation
  • First half where the gate is is not walkable, the rest is ~850€ without insulation
  • Completely not walkable ~500 without insulation
  • We decided that getting up there is a hassle, what if something happens, ... so we want the cheapest solution with insulation. That way we can also recycle our current walls.
• Lasercutter Bernhard
  • Bernhard wasn't there.
  • Nico made a plan how to build the room so you can get up there and store laser or 3D-Print material ~600€
• 3D-Printing AdrianM
  • Basic plan is done, see Fusion document. Details will follow.
• Kitchen PeterM + Theresa
  • Will be planned the next week
• Community Annika
  • Seems like we need new desks as Annika suggested to have 4-5 with the same dimensions - She will have a look how much that'll cost.
  • There are two options regardint the Pit:
  • 1. We will remove the steel frame and have the whole floor on the same level
  • - You can't stand in the Pit
  • - The floor won't be perfectly even
  • + No steps in the community area
  • + It's easy to use the pit with a car
  • + Cheap
  • 2. Very big platform that will span from the wall to the workshop, from the Laser-Cube to the front of the Pit (close to the gate)
  • + It's easier to use the pit as a storage area as you can nearly stand but it's still a bit to small to full stand
  • + We don't need to remove the steel frame
  • + Floor can be made flat
  • - There will be several steps when crossing the space
  • - Accessing the workshop might mean you have to take a step
  • - You can't bring palettes in/out of the workshop into the rest of the space
  • - A lot of work and money needed
  • Annike is sending Nico the size of the planned platform so he can do some calculations on the wood that's needed
  • Rest will be planned once electronic corner and kitchen have be planned
• Door David
  • No news

Worklog since last meeting

• Lights and aluminium rails in the pit have been removed
• The concrete around the left metal grid in the floor was completely ruined - has been fixed with new concrete
• New 50W LED floodlight has been installed in the front of the gates
• Two of the floodlights in the parking lot are now controlled by a twilight switch
• All holes in the walls have been filled with plaster and sanded down
• Unneeded air duct in the pit has been removed
• Pit has been cleaned a little

Open Decisions

• Do we want the brick wall with plaster (verputzt) or as is and just painted white?
  • If we want it with plaster let's ask the company who built the wall if they can leave the construction scaffolding another week
  • If we can keep the scaffolding we will do the plastering
• We have an offer from a graffiti artist who only wants money for the spray cans - do we want something?
  • Jan wanted to show some examples in the Plenum and we would like to know how much that might cost us. But idea is nice!

ToDos

• Clarify if we can remove the concrete block in front of the pit and the door - David
  • David will discuss this with MGH next week
• Clarify if we can remove the steel edge on the pit - David
  • David will discuss this with MGH next week
• Plan on what to do with the ramp in the back of the space
  • We will mostly will it with gravel, place a sturdy foil on top and pour concrete on top
  • Nico will look at how much gravel, concrete and reinforcement (Armierung) we need
  • Nico found a foil in the space we can use
  • Nico will look into ways of transporting that much stuff (like renting a trailer)
  • Nico has the basic tools we need
• Fix all holes and damaged places in the inside walls (outside would be an addition achievement!)
  • Will be done when we do the plastering of the brick wall
• Isolate all holes to the outside, like around the gates, with PU-Foam without damaging the gates (We bought PU-Foam and it's in the new space)
• Do something with the brick wall
  • Depends on the scaffolding
• Replace metal grids with something closed
  • Best shot seems to be two layers of OSB 22mm + 18mm to get 40mm - There are 40mm sheets but 22 and 18 are readily available and cheap
• Paint the inside walls up to the cable canal once they have been prepared
• Install power cables and connect them (two tasks)
• Install Network cabling