LaserCutter: Difference between revisions
(→Safety) |
|||
| Line 38: | Line 38: | ||
* Undergoing a training course is mandatory before you start using the laser. | * Undergoing a training course is mandatory before you start using the laser. | ||
* Do not tamper or work around any safety measures, including the machine activation or laser safety circuit. | |||
* Always (with no exception) supervise the machine or have someone supervise it for you. Do not leave the laser cutter unattended while a job is running. | * Always (with no exception) supervise the machine or have someone supervise it for you. Do not leave the laser cutter unattended while a job is running. | ||
* Immediately e-stop the machine in case of a fire and after that start extinguishing it. | * Immediately e-stop the machine in case of a fire and after that start extinguishing it. | ||
Revision as of 16:11, 20 October 2022
|
Attention: Dangerous machine ahead |
|
|---|---|---|
| Use only at your own risk, and after proper instruction! |
|
|
Attention: Maintenance |
|
|---|---|---|
| Machine is currently not working (ETA unknown) |
| LaserCutter Status: broken [box doku] | |
|---|---|
| |
| Description | A Laser to cut stuff |
| Owner | MuMaLab |
Before starting, please read the Safety Guidelines
Current Status
- Undergoing major maintenance and upgrades
- Lens: 50mm
Features
- Big build area (Table Size: 1240 x 1000 mm / max Cutting Size: 1140 x 800 mm)
- Pilot laser for dry run and positioning
- 90W CO2, wavelength ≈ 10 microns
Components / Parts
- Trocen AWC7824 Controller Laser Engraving Cutting Controller
- Reci 90W CO2 Laser Tube
- DY13 100W Laser PSU
- OpenLaserSafety v1.0
- Exhaust System including filters
Safety
Laser cutters are dangerous in various aspects. There is an invisible laser beam that can permanently damage your eye. The fumes that escape while laser-cutting or engraving materials are at least unhealthy, in some cases toxic and worst case can cause severe health issues when inhaled. There is also a chance of starting a fire if operated incorrectly.
- Undergoing a training course is mandatory before you start using the laser.
- Do not tamper or work around any safety measures, including the machine activation or laser safety circuit.
- Always (with no exception) supervise the machine or have someone supervise it for you. Do not leave the laser cutter unattended while a job is running.
- Immediately e-stop the machine in case of a fire and after that start extinguishing it.
- Stop the laser job and investigate if you smell or hear anything weird.
- Make sure nobody stays in the pit (performing work, ...) and hang the white/red chain before starting the laser.
- Never attempt to laser-cut unknown or dangerous materials. If in doubt, do not laser-cut.
Laser-cutable materials
We recommend that new users cut/engrave poplar (wood) or MDF. A good list of dangerous and safe materials can be found here. If you are unsure what material it is or if you can not find information if it is safe to laser, always default to 'unsafe' and do not laser-cut.
Technical Details & Manuals
These resources are not needed by users.
Finance
A 100W laser tube costs around 1200€ and has a lifetime of 6000-10000h. On the 20150315 Plenum/20161009 Plenum), it was decided that the following usage fee will be charged:
- 2€ per 10min for members, 4€ for non-members, 5€ for "commercial" use
