Archive:Tiefpunkts-CNC-Mill: Difference between revisions

Revision as of 02:23, 15 June 2015

CNC Mill Release status: experimental [box doku]
Description
Author(s)	tiefpunkt (Tiefpunkt)
Last Version	v0.1

Severin brought his CNC mill to the lab a while back. It's beginnings can be found here: CNC-Fräse

Date	Activities
2015-04-24	Screwed down the main table
2015-04-26	Rebuild Y axis motor plate in OpenSCAD, and lasercut it.
2015-04-30	Printed new guides for the Y axis belt [1] -> A little to big. Screwed new Y axis motor plate into place. Belt a little too loose. Need to place pulleys a little higher.
2015-05-03	Printed parts to hold 2 endstops on the Y axis. Endstops are in place now, but not yet connected.
2015-06-14	Connected endstops to Arduino controller Updated grbl on Arduino to 0.8c (custom compiled, to accommodate for different pin configurations, and homing only on X and Y [2]) Testdrives Problems: Noise on the endstops, triggered e.g. when starting the spindle -> maybe bigger pullups? Right X endstop cannot be triggered, due to size of the z-axis sled

== Workflow ==

Software Tools:
- Universal G-Code Sender - Java, requires rxtx library, on OS X follow [3] to install
- F-Engrave - DXF to GCode, single pass only

@@ Line 33: / Line 33: @@
 |
 * Printed parts to hold 2 endstops on the Y axis. Endstops are in place now, but not yet connected.
+|-
+| 2015-06-14
+|
+* Connected endstops to Arduino controller
+* Updated grbl on Arduino to 0.8c (custom compiled, to accommodate for different pin configurations, and homing only on X and Y [https://github.com/grbl/grbl/issues/224])
+* Testdrives
+Problems:
+* Noise on the endstops, triggered e.g. when starting the spindle -> maybe bigger pullups?
+* Right X endstop cannot be triggered, due to size of the z-axis sled
 |}
+ == Workflow ==
+* Software Tools:
+** [https://github.com/winder/Universal-G-Code-Sender Universal G-Code Sender] - Java, requires rxtx library, on OS X follow [http://blog.brianhemeryck.me/installing-rxtx-on-mac-os-mountain-lion/] to install
+** [http://www.scorchworks.com/Fengrave/fengrave.html#download F-Engrave] - DXF to GCode, single pass only
+== References ==
+* G-Code
+** Wikipedia [https://en.wikipedia.org/wiki/G-code#List_of_G-codes_commonly_found_on_FANUC_and_similarly_designed_controls]
+** RegRap [http://reprap.org/wiki/G-code], also shorter [https://thingiverse-production.s3.amazonaws.com/assets/87/b0/2c/f5/4c/CheatSheet.pdf Cheat Sheet]
 [[Category:Project]]