Sidewinder X2
Jump to navigation
Jump to search
|
Attention: This printer is not ready for public use yet. |
|
|---|---|---|
| The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :) |
| Sidewinder X2 Status: beta [box doku] | |
|---|---|
| |
| Description | Artillery Sidewinder X2 |
| Owner | MuMaLab |
| Financing | Bought from official Vendor (€470) |
In addition to the two Prusa Minis which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.
- Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly.
Details
- Build volume 300 x 300 x 400 mm
- Printable via USB Stick
- Material: plain PLA
Usage
If you haven't used the printer, register for the monthly 3D printing intro course or ask in the 3d_printing channel on Slack beforehand.
- Slice your .stl in PrusaSlicer
- Use the official presets for the Artillery Sidewinder X2 (same as for the X1)
- Add "Artillery" in the "Other Vendors" tab
- Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared
- Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
- Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer
- Verify that you're about to start the right print via the filename
