Archive:Printrbot Simple Maker's Kit
Jump to navigation
Jump to search
You are visiting an old wiki page. The information found on "Printrbot Simple Maker's Kit" might be out of date.| Creating Printrbot Simple Maker's Kit Status: broken [box doku] | |
|---|---|
| Description | 3D printer |
| Owner | Nils / Kojote |
| Financing | private |
THIS PRINTER IS OUT OF ORDER RIGHT NOW! IT NEEDS A NEW LJ12A3-4-Z/BY INDUCTION PROBE!
Details
- Printing Volume 150 x 150 x 150 mm
- Nozzle 0.4mm for 1,75mm
- Plywood construction
- held together by T-Slots
- Printable via USB/ Octoprint (using external Raspberry)
- Octoprint connected
Usage
If you have not used the printer your about to, ask AdrianMenzel on Slack beforehand
- Slice your .stl in Simplify3D
- Profile(called 'Printrbot Simple Makers Kit') is ready for PLA and Premium PLA on the Simplify 3d Slicer Software on the Laser PC
- Upload your GCode onto the Octoprint Webinterface, available by the IP mentioned on the Network entry
- For any Questions, contact AdrianMenzel on Slack
- Costs: see 3D Printing
Notes
- Don't use with ABS
- Don't touch the fan! It's just glued on there.
