Sidewinder X2: Difference between revisions
Jump to navigation
Jump to search
Spacezhang (talk | contribs) (update calibration) |
Spacezhang (talk | contribs) (partial update) |
||
| Line 1: | Line 1: | ||
{{AttentionBox | {{AttentionBox | ||
| title=This printer is not ready for public use yet. | | title=This printer is not entirely ready for public use yet. | ||
| msg=The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :) | | msg=The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :) | ||
}} | }} | ||
{{ThingInfoBox | {{ThingInfoBox | ||
|name = Sidewinder X2 | |name = Sidewinder X2 | ||
| Line 13: | Line 12: | ||
|financing = Bought from official Vendor (€470) | |financing = Bought from official Vendor (€470) | ||
}} | }} | ||
In addition to the two [[Prusa Mini|Prusa Minis]] which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs. | In addition to the two [[Prusa Mini|Prusa Minis]] which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs. | ||
* Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly. | * Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly. | ||
* The printer is now open to very experieced user and standard PLA Filament. Please ask on #3d_printing slack channel before usage. | |||
* If you want to help calibrate the printer or help with the wiki site, please contact @yichen zhang on slack to get the newest update on the printer. | |||
== Details == | == Details == | ||
* Build volume 300 x 300 x 400 mm | * Build volume 300 x 300 x 400 mm | ||
* UBL mesh bed leveling enabled | |||
* Printable via USB Stick | * Printable via USB Stick | ||
* Material: plain PLA | * Material: plain 1.75mm PLA | ||
== | == Quickstart guide== | ||
''' If you haven't used the printer, register for the monthly [https://tickets.mumalab.org/courses/ 3D printing intro course] or ask in the 3d_printing channel on Slack beforehand.''' | ''' If you haven't used the printer, register for the monthly [https://tickets.mumalab.org/courses/ 3D printing intro course] or ask in the 3d_printing channel on Slack beforehand.''' <br> | ||
'''INFO: As of 29.09.2022, this printer hasn't been included in 3D printing intro course''' | |||
* Slice your .stl in [https://github.com/prusa3d/PrusaSlicer PrusaSlicer] | * Slice your .stl in [https://github.com/prusa3d/PrusaSlicer PrusaSlicer] | ||
* Use the official presets for the Artillery Sidewinder X2 (same as for the X1) | * Use the official presets for the Artillery Sidewinder X2 (same as for the X1) | ||
| Line 29: | Line 33: | ||
** Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared | ** Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared | ||
** Select "Artillery Sidewinder X1 BL-TOUCH" as your printer | ** Select "Artillery Sidewinder X1 BL-TOUCH" as your printer | ||
** Edit the start Gcode under Printer setting in advanced mode and add M420 S1 Z2 after G28 command to [https://marlinfw.org/docs/gcode/M420.html enable mesh bed leveling] | |||
* Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer | * Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer | ||
* Verify that you're about to start the right print via the filename | * Verify that you're about to start the right print via the filename | ||
| Line 35: | Line 40: | ||
* Marlin Firmware on Ruby board has beed updated to 2.0.9.3 | * Marlin Firmware on Ruby board has beed updated to 2.0.9.3 | ||
* TFT Firmware has been updated with Unified Icon | * TFT Firmware has been updated with Unified Icon | ||
** Used [https://www.thingiverse.com/thing:5186707 Firmware] link | |||
* Belt tightness checked | * Belt tightness checked | ||
* Manual bed leveling done | * Manual bed leveling done | ||
| Line 42: | Line 47: | ||
* Probe offset set | * Probe offset set | ||
== To do list == | |||
== Suggestions and Feedback == | |||
'''Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?''' | |||
[[Category:Inventory]] | [[Category:Inventory]] | ||
[[Category:3dPrinter]] | [[Category:3dPrinter]] | ||
Revision as of 21:14, 29 September 2022
|
Attention: This printer is not entirely ready for public use yet. |
|
|---|---|---|
| The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :) |
| Sidewinder X2 Status: beta [box doku] | |
|---|---|
| |
| Description | Artillery Sidewinder X2 |
| Owner | MuMaLab |
| Financing | Bought from official Vendor (€470) |
In addition to the two Prusa Minis which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.
- Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly.
- The printer is now open to very experieced user and standard PLA Filament. Please ask on #3d_printing slack channel before usage.
- If you want to help calibrate the printer or help with the wiki site, please contact @yichen zhang on slack to get the newest update on the printer.
Details
- Build volume 300 x 300 x 400 mm
- UBL mesh bed leveling enabled
- Printable via USB Stick
- Material: plain 1.75mm PLA
Quickstart guide
If you haven't used the printer, register for the monthly 3D printing intro course or ask in the 3d_printing channel on Slack beforehand.
INFO: As of 29.09.2022, this printer hasn't been included in 3D printing intro course
- Slice your .stl in PrusaSlicer
- Use the official presets for the Artillery Sidewinder X2 (same as for the X1)
- Add "Artillery" in the "Other Vendors" tab
- Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared
- Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
- Edit the start Gcode under Printer setting in advanced mode and add M420 S1 Z2 after G28 command to enable mesh bed leveling
- Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer
- Verify that you're about to start the right print via the filename
Finished Calibration
- Marlin Firmware on Ruby board has beed updated to 2.0.9.3
- TFT Firmware has been updated with Unified Icon
- Used Firmware link
- Belt tightness checked
- Manual bed leveling done
- Unified bed Mesh leveling done (EEPROM slot 1)
- PID Autotune done for 215 nozzle / 60 bed
- Probe offset set
To do list
Suggestions and Feedback
Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?
