Archive:Noctar: Difference between revisions
Jump to navigation
Jump to search
You are visiting an old wiki page. The information found on "Noctar" might be out of date. Not at the space anymore.
No edit summary |
m (Aaron moved page Noctar to Archive:Noctar) |
(No difference)
|
Latest revision as of 13:59, 10 September 2022
Organizational
Contact Simon if you want to use the system. You should have knowledge of radio frequency technology and regulations. There will be a test.
Technical
- Direct Quadrature Receiver/Transmitter
- Separate LOs for receive and transmit paths
- 55 MHz IF lowpass filter
- 2x125 MSa/s 12 bit ADCs
- Altera EP4CGX22C FPGA with DSP core
- 2x250 MSa/s 16 bit DACs
Projects
Rewriting the FPGA firmware
The factory firmware has several drawbacks that make it difficult to use the system easily:
- Decimation is done in 5 stages, each halving the sample rate. This leads to an awful lot of digital filter noise, and decimation 32 is not really sufficient for most applications.
* New design using a 2x16 multiplier FIR filter with symmetry handling and accumulator (i.e. 31 coefficients in a symmetric lowpass filter design without decimation) * Additional fixed IIR filters implementing high decimation factors
- Table based NCO. This takes up lots of FPGA space, and has limited accuracy.