20240225 Plenum: Difference between revisions

From The Munich Maker Lab's Wiki
Jump to navigation Jump to search
(Created page with "<!-- PLEASE ALWAYS COPY/PASTE THE TEMPLATE FROM [Plenum_Template] TO AVOID MISSING INFO - Thanks --> The Plenum is a regular meeting of all people involved with the space to talk about things and decide stuff. If you have any topics to add, go right ahead! Please sign your points with your name (by adding a "<nowiki>--~~~~</nowiki>" after your text). After the Plenum, please follow the tasks outlined in Cycling the Plenum to archive the discussion. <big>Preamble<...")
 
(previous content was a copy of the plenum page, not the actual notes. Copied over from the proper etherpad.)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
<!-- PLEASE ALWAYS COPY/PASTE THE TEMPLATE FROM [Plenum_Template] TO AVOID MISSING INFO - Thanks -->
The Plenum is a regular meeting of all people involved with the space to talk about things and decide stuff.
If you have any topics to add, go right ahead! Please sign your points with your name (by adding a "<nowiki>--~~~~</nowiki>" after your text).
After the Plenum, please follow the tasks outlined in [[Cycling the Plenum]] to archive the discussion.
<big>Preamble</big>
* The Plenum is an institution to decide what the space should look like, physically and in other ways, such as virtually.
* Things concerning the space should be discussed at a plenum.
* Everyone on-site can participate in that process, member or otherwise.
* Everyone can lead a plenum; no need for board members to do that.
* Topics should ideally be announced on the Plenum wiki page beforehand.
* The Plenum should be held in a language that everyone participating understands.
* Scheduling: Second Thursday of the month at 8 pm and the last Sunday after the cleanup (which starts at 11 am)
* Plenums should be no longer than 90 minutes.
'''Next  Plenum: ''' Thursday, '''March 13th''' at '''8pm''' 
= Topics for the Plenum =
== What are you currently working on? ==
== What are you currently working on? ==
 
* Peter: Spanntisch für Oberfräse und Tisch
* Bira: Pull request bei Blender für Hohlkörper
* Aaron: Blumentopfmigration
* Robert: CNC einsteigen
* Theresa: Leben
* Jonas: Briefkastensensor
* German: Starlink


== Projects & Groups update ==
== Projects & Groups update ==
Line 28: Line 12:


* Pondering on the possibility of a firmware upgrade for our two prusa minis at the lab.
* Pondering on the possibility of a firmware upgrade for our two prusa minis at the lab.
<blockquote>
It seems that the prevoiusly 5.1.0 alpha firmware for the prusa mini has become the [https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v5.1.2 stable 5.1.2 Version] (Hurray!)  
It seems that the prevoiusly 5.1.0 alpha firmware for the prusa mini has become the [https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v5.1.2 stable 5.1.2 Version] (Hurray!)  
With Input Shaper and Pressure Advance that sould achieve better print quality at sometimes double the speed.  
With Input Shaper and Pressure Advance that sould achieve better print quality at sometimes double the speed.  
I think an experimental upgrade for one of our minis could be tried out and if it works good enough we can then proceed to switch both printer's firmware to the newest version. For people prototyping here an speed and quality upgrade should be pretty nice to have :D --[[User:Spacezhang|Spacezhang]] ([[User talk:Spacezhang|talk]]) 20:15, 23 February 2024 (CET)
I think an experimental upgrade for one of our minis could be tried out and if it works good enough we can then proceed to switch both printer's firmware to the newest version. For people prototyping here an speed and quality upgrade should be pretty nice to have :D --[[User:Spacezhang|Spacezhang]] ([[User talk:Spacezhang|talk]]) 20:15, 23 February 2024 (CET)
</blockquote>
** Upgrading one of them and documenting which one it was: Approved by everyone


== Vorstand updates ==
== Vorstand updates ==
nothing new


== Say Thank you ==
== Say Thank you ==
* everyone that helped with the cleanup
* everyone who held courses
* Peter for ordering hand router replacement parts


== MiniJobs ==
== MiniJobs ==
Line 57: Line 48:
== Things to Buy ==
== Things to Buy ==
* The light in the workshop degraded a lot and is very dim. The LED tubes also start breaking now (one flickering, taken out) and others only half working. I want to propose replacing them with the ones that we tried a while ago and turned out to be good: https://www.led-centrum.de/led-leuchtmittel/led-roehren/120cm-led-roehren/120cm-philips-master-led-roehren-uo-universal-15-5-865-t8-6500.html?refID=101 10 x 19,52 - 195,2 € total. --[[User:C22|ⓒ②②]] ([[User talk:C22|🅃🄰🄻🄺]])
* The light in the workshop degraded a lot and is very dim. The LED tubes also start breaking now (one flickering, taken out) and others only half working. I want to propose replacing them with the ones that we tried a while ago and turned out to be good: https://www.led-centrum.de/led-leuchtmittel/led-roehren/120cm-led-roehren/120cm-philips-master-led-roehren-uo-universal-15-5-865-t8-6500.html?refID=101 10 x 19,52 - 195,2 € total. --[[User:C22|ⓒ②②]] ([[User talk:C22|🅃🄰🄻🄺]])
** approved by everyone


* Shelly 3EM for power measurement of incoming line (3x). https://www.shelly.com/en-de/products/product-overview/shelly-3-em - ca. 100€  --[[User:C22|ⓒ②②]] ([[User talk:C22|🅃🄰🄻🄺]]) 16:44, 23 February 2024 (CET)
* Shelly 3EM for power measurement of incoming line (3x). https://www.shelly.com/en-de/products/product-overview/shelly-3-em - ca. 100€  --[[User:C22|ⓒ②②]] ([[User talk:C22|🅃🄰🄻🄺]]) 16:44, 23 February 2024 (CET)
** approved by everyone
** Robert will talk to electrician


* amazon.de/Jokari-20050-Abisolierzange-Super-plus/dp/B002BDNL4Q/r (14€) for the e-corner (suggested by a user, forgot the name, but I like the idea) --[[User:C22|ⓒ②②]] ([[User talk:C22|🅃🄰🄻🄺]]) 11:45, 25 February 2024 (CET)
* amazon.de/Jokari-20050-Abisolierzange-Super-plus/dp/B002BDNL4Q/r (14€) for the e-corner (suggested by a user, forgot the name, but I like the idea) --[[User:C22|ⓒ②②]] ([[User talk:C22|🅃🄰🄻🄺]]) 11:45, 25 February 2024 (CET)
** approved by everyone


== Request for online participation ==
* Safety Glasses for CNC Milling Workshop, 80€
If necessary, you can request to participate remotely (via jitsi). Please briefly describe why you want to participate remotely and what topic you want to discuss. (additionally to adding the topic on top!)
** approved by everyone


<!-- DO NOT EDIT THE CATEGORY OUT :) Thanks -->  
<!-- DO NOT EDIT THE CATEGORY OUT :) Thanks -->  
[[Category:Plenum]][[Category:Minutes]]
[[Category:Plenum]][[Category:Minutes]]

Latest revision as of 09:54, 12 March 2024

What are you currently working on?

  • Peter: Spanntisch für Oberfräse und Tisch
  • Bira: Pull request bei Blender für Hohlkörper
  • Aaron: Blumentopfmigration
  • Robert: CNC einsteigen
  • Theresa: Leben
  • Jonas: Briefkastensensor
  • German: Starlink

Projects & Groups update

This is a quick update from group meetings at our space or other long-term space projects (e.g., Lasercutter, CNC, etc.)

  • Pondering on the possibility of a firmware upgrade for our two prusa minis at the lab.

It seems that the prevoiusly 5.1.0 alpha firmware for the prusa mini has become the stable 5.1.2 Version (Hurray!) With Input Shaper and Pressure Advance that sould achieve better print quality at sometimes double the speed. I think an experimental upgrade for one of our minis could be tried out and if it works good enough we can then proceed to switch both printer's firmware to the newest version. For people prototyping here an speed and quality upgrade should be pretty nice to have :D --Spacezhang (talk) 20:15, 23 February 2024 (CET)

    • Upgrading one of them and documenting which one it was: Approved by everyone

Vorstand updates

nothing new

Say Thank you

  • everyone that helped with the cleanup
  • everyone who held courses
  • Peter for ordering hand router replacement parts

MiniJobs

If you want to be mentioned at the previous section as well, one of the easiest ways is to take one of our MiniJobs. This is a great way to participate in the Munich Maker Lab e.V. and contributing time helps keeping our space in a good shape. You can find all information about the scope of the available jobs on MiniJobs.


Stuff from the past

What was discussed at the last Plenum? What's the current status of those things? 20240128 Plenum


Anything you don't feel comfortable with within the space? What would you like to change or to be changed?

Things for Newsletter, Social Media & Website News

Introduce Loomio poll

Things to Buy

  • amazon.de/Jokari-20050-Abisolierzange-Super-plus/dp/B002BDNL4Q/r (14€) for the e-corner (suggested by a user, forgot the name, but I like the idea) --ⓒ②② (🅃🄰🄻🄺) 11:45, 25 February 2024 (CET)
    • approved by everyone
  • Safety Glasses for CNC Milling Workshop, 80€
    • approved by everyone
Retrieved from "https://wiki.munichmakerlab.de/index.php?title=20240225_Plenum&oldid=7225"