Sidewinder X2: Difference between revisions

From The Munich Maker Lab's Wiki
Jump to navigation Jump to search
(first version)
 
No edit summary
 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{AttentionBox
| title=This printer is not ready for public use yet.
| msg=The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :)
}}
{{ThingInfoBox
{{ThingInfoBox
|name        = Sidewinder X2
|name        = Sidewinder X2
|status      = beta
|status      = working
|image      = Sidewinder_x2.jpg
|image      = Artillery-Sidewinder-X2.jpg
|description = Artillery Sidewinder X2
|description = Artillery Sidewinder X2
|owner      = MuMaLab
|owner      = MuMaLab
|username    =  
|username    =  
|financing  = Bought from official Vendor (€470)
|financing  = Bought from official Vendor (€412)
|buildvolume = 300 x 300 x 400 mm (11.8 x 11.8 x 15.7 in)
|nozzle = 0.4 mm stainless steel
}}
}}


In addition to the two [[Prusa Mini|Prusa Minis]] which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.
In addition to the two [[Prusa Mini|Prusa Minis]] which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.
* Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly.
* Please bring your own filament and only use plain PLA. If you would like to print materials other then PLA please write in the #3d_printing channel on slack. Additives like wood or carbon wear out the nozzles extremely quickly.
* The printer is open to experieced user. Please ask on #3d_printing slack channel before usage if you are not familiar with the machine.


== Details ==
== Details ==
* Build volume 300 x 300 x 400 mm
* UBL mesh bed leveling enabled
* Printable via USB Stick
* Printable via USB Stick and micro SD card
* Material: plain PLA
* Material: plain 1.75mm PLA normally


== Usage ==
== Quickstart guide==
''' If you haven't used the printer, register for the monthly [https://tickets.mumalab.org/courses/ 3D printing intro course] or ask in the 3d_printing channel on Slack beforehand.'''
''' If you haven't used the printer but already visited one of the monthly [https://tickets.mumalab.org/courses/ 3D printing intro course], please for now contact @yichen zhang on slack for a 15 - 30 min quick introduction to the machine. ''' <br>
* Slice your .stl in [https://github.com/prusa3d/PrusaSlicer PrusaSlicer]
 
* Use the official presets for the Artillery Sidewinder X2 (same as for the X1)
* Please visually inspect the printer for visible damage before usage.
** If damage is been found please contact @yichen zhang on slack. Thank you.
* Download [https://github.com/prusa3d/PrusaSlicer PrusaSlicer]
* Please use the official Artillery Sidewinder X1 presets for the Sidewinder X2
** Add "Artillery" in the "Other Vendors" tab
** Add "Artillery" in the "Other Vendors" tab
** Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared
** Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab
** Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
** Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
* Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer
* Slice your 3D Object as normal
* Verify that you're about to start the right print via the filename
* Get the USB stick that's on the printer and export your sliced model onto it.
* Power up the machine via the power switch on the backside of the machine.
* Preheat the nozzle via the load/unload menu of the machine (210°C Recommended)
* Insert your filament through the filament runout sensor and into the extruder.
** Then use the load filament function from the machine to load and purge the filament.
* Check that no particle is trapped between the magnetic sticker and magnetic PEI Sheet as we are using stored mesh bed leveling data (because mesh bed leveling takes a long time for a machine this size, if you want to ensure perfect quality feel free to redo the mesh bed leveling for your specific print.)
* Clean the magnetic PEI sheet with IPA
* Verify that you're about to start the right print via the filename the start your print.
* Please at least wait for the first layer to be printed and verify its quality.
* Please check the print regularly during printing. Please don't leave the Lab while printing. Thank you.
* After printing, preheat and use the unload filament function to unload your filament. Please home the machine before shutting it down.
 
== Guide Video ==
A really nice [https://www.youtube.com/watch?v=SCog2i3vVlk Review Video] on youtube.
 
== Finished calibration ==
* Marlin Firmware on Ruby board has beed updated to 2.0.9.3
* TFT Firmware has been updated with Unified Icon
** Used [https://www.thingiverse.com/thing:5186707 Firmware] link
* Belt tightness checked
* Manual bed leveling done
* Unified bed Mesh leveling done (EEPROM slot 1)
* PID Autotune done for 215 nozzle / 60 bed
* Probe offset set
 
== To do list ==
* Flow rate calibration
* Torture test


== Machine Update ==
* 3.11.2022: [https://www.aliexpress.com/item/4001276183036.html?spm=a2g0o.order_list.order_list_main.17.21ef1802cX4xi7 Magnetic PEI springsteel bed] installed
* 10.12.2022: Reverse Bowden setup is now complete (Using [https://www.thingiverse.com/thing:5257221  Side Spool Guide for Artillery Sidewinder X2]) by DaRaX. The machine has been move down to its intended space on the low slot of the shelf.
* 28.07.2024: The damaged PEI Sheet has been changed out for a new one.
== Maintenance update ==
Next planned maintanance of the machine:
* 1.10.2024
== Upgrades ==
* Magnetic PEI bed (Or other removable print bed)
* Raspberry Pi (Octoprint upgrade)
* All metal hotend
* Better cooling fan
* Better Nozzle
* Reinforcement bar for ringing reduction
* USB Extender for longevity of USB Port
== Test Prints ==
[[File:SW2 stockBenchy.jpg|thumb|Prusaslicer stock setting benchy ]]
== Technical Details ==
'''Boring stuff for the documentation'''
=== Machine Construction ===
[[File:SW2 electronics.jpg|thumb|Sidewinder X2 electronics compartment]]
[[File:SW2 mainboard.jpg|thumb|Sidewinder 2 Ruby mainboard]]
[[File:SW2 TFT main board.jpg|thumb|Sidewinder X2 TFT main board]]
=== Packaging ===
[[File:SW2 packaging.jpg|thumb|Delivery Packaging]]
== Discussion ==
* Switch to 0.6mm Nozzle
[Description comming soon]
== Suggestions and Feedback ==
'''Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?''' <br>
Please write your comments below!
* [Comment]
[[Category:Inventory]]
[[Category:Inventory]]
[[Category:3dPrinter]]
[[Category:3dPrinter]]

Latest revision as of 22:37, 26 October 2024

         
Sidewinder X2

Status: working [box doku]

Artillery-Sidewinder-X2.jpg
Description Artillery Sidewinder X2
Owner  MuMaLab
Financing  Bought from official Vendor (€412)
Build Volume  300 x 300 x 400 mm (11.8 x 11.8 x 15.7 in)
Nozzle  0.4 mm stainless steel


In addition to the two Prusa Minis which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.

  • Please bring your own filament and only use plain PLA. If you would like to print materials other then PLA please write in the #3d_printing channel on slack. Additives like wood or carbon wear out the nozzles extremely quickly.
  • The printer is open to experieced user. Please ask on #3d_printing slack channel before usage if you are not familiar with the machine.

Details

  • UBL mesh bed leveling enabled
  • Printable via USB Stick and micro SD card
  • Material: plain 1.75mm PLA normally

Quickstart guide

If you haven't used the printer but already visited one of the monthly 3D printing intro course, please for now contact @yichen zhang on slack for a 15 - 30 min quick introduction to the machine.

  • Please visually inspect the printer for visible damage before usage.
    • If damage is been found please contact @yichen zhang on slack. Thank you.
  • Download PrusaSlicer
  • Please use the official Artillery Sidewinder X1 presets for the Sidewinder X2
    • Add "Artillery" in the "Other Vendors" tab
    • Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab
    • Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
  • Slice your 3D Object as normal
  • Get the USB stick that's on the printer and export your sliced model onto it.
  • Power up the machine via the power switch on the backside of the machine.
  • Preheat the nozzle via the load/unload menu of the machine (210°C Recommended)
  • Insert your filament through the filament runout sensor and into the extruder.
    • Then use the load filament function from the machine to load and purge the filament.
  • Check that no particle is trapped between the magnetic sticker and magnetic PEI Sheet as we are using stored mesh bed leveling data (because mesh bed leveling takes a long time for a machine this size, if you want to ensure perfect quality feel free to redo the mesh bed leveling for your specific print.)
  • Clean the magnetic PEI sheet with IPA
  • Verify that you're about to start the right print via the filename the start your print.
  • Please at least wait for the first layer to be printed and verify its quality.
  • Please check the print regularly during printing. Please don't leave the Lab while printing. Thank you.
  • After printing, preheat and use the unload filament function to unload your filament. Please home the machine before shutting it down.

Guide Video

A really nice Review Video on youtube.

Finished calibration

  • Marlin Firmware on Ruby board has beed updated to 2.0.9.3
  • TFT Firmware has been updated with Unified Icon
  • Belt tightness checked
  • Manual bed leveling done
  • Unified bed Mesh leveling done (EEPROM slot 1)
  • PID Autotune done for 215 nozzle / 60 bed
  • Probe offset set

To do list

  • Flow rate calibration
  • Torture test

Machine Update

Maintenance update

Next planned maintanance of the machine:

  • 1.10.2024

Upgrades

  • Magnetic PEI bed (Or other removable print bed)
  • Raspberry Pi (Octoprint upgrade)
  • All metal hotend
  • Better cooling fan
  • Better Nozzle
  • Reinforcement bar for ringing reduction
  • USB Extender for longevity of USB Port

Test Prints

Prusaslicer stock setting benchy

Technical Details

Boring stuff for the documentation

Machine Construction

Sidewinder X2 electronics compartment
Sidewinder 2 Ruby mainboard
Sidewinder X2 TFT main board

Packaging

Delivery Packaging

Discussion

  • Switch to 0.6mm Nozzle

[Description comming soon]

Suggestions and Feedback

Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?
Please write your comments below!

  • [Comment]
Retrieved from "https://wiki.munichmakerlab.de/index.php?title=Sidewinder_X2&oldid=7512"