Archive:Printrbot Simple Maker's Kit: Difference between revisions
Jump to navigation
Jump to search
You are visiting an old wiki page. The information found on "Printrbot Simple Maker's Kit" might be out of date.
No edit summary |
m (Vrs moved page Printrbot Simple Maker's Kit to Archive:Printrbot Simple Maker's Kit without leaving a redirect) |
Latest revision as of 15:41, 10 September 2022
You are visiting an old wiki page. The information found on "Printrbot Simple Maker's Kit" might be out of date.| Creating Printrbot Simple Maker's Kit Status: broken [box doku] | |
|---|---|
| Description | 3D printer |
| Owner | Nils / Kojote |
| Financing | private |
THIS PRINTER IS OUT OF ORDER RIGHT NOW! IT NEEDS A NEW LJ12A3-4-Z/BY INDUCTION PROBE!
Details
- Printing Volume 150 x 150 x 150 mm
- Nozzle 0.4mm for 1,75mm
- Plywood construction
- held together by T-Slots
- Printable via USB/ Octoprint (using external Raspberry)
- Octoprint connected
Usage
If you have not used the printer your about to, ask AdrianMenzel on Slack beforehand
- Slice your .stl in Simplify3D
- Profile(called 'Printrbot Simple Makers Kit') is ready for PLA and Premium PLA on the Simplify 3d Slicer Software on the Laser PC
- Upload your GCode onto the Octoprint Webinterface, available by the IP mentioned on the Network entry
- For any Questions, contact AdrianMenzel on Slack
- Costs: see 3D Printing
Notes
- Don't use with ABS
- Don't touch the fan! It's just glued on there.
