Network: Difference between revisions
Jump to navigation
Jump to search
m (→Allocated IP Addresses: Added lasercutting pc) |
(→IPv6: broken :() |
||
| Line 41: | Line 41: | ||
=== IPv6 === | === IPv6 === | ||
We got native IPv6 \o/ | <del>We got native IPv6 \o/</del> IPv6 is broken, unfortunately. There is IPv6 on the Freifunk WiFi, if you really need it. | ||
== Uplink == | == Uplink == | ||
Revision as of 17:07, 13 January 2016
WiFi
- SSID: munichmakerlab
- Security: WPA2 Personal. Preshared Key is written on the whiteboard.
- Mode: 802.11gn. No 802.11b. If you really really need to connect a 11Mbit/s only device, please talk to tiefpunkt
Network Segment
- Subnetmask: 255.255.255.0
- Gateway: 192.168.0.1
- DNS-Server: 192.168.0.1
- DHCP-Server: 192.168.0.1
Allocated IP Addresses
| IP Address | Name | Description |
|---|---|---|
| 192.168.0.1 | Router | Router |
| 192.168.0.2 | FritzBox | VoIP Gateway (FritzBox 5050) |
| 192.168.0.10 | NyanPrint | Color Laser Printer |
| 192.168.0.25 | OctoPrint | OctoPrint |
| 192.168.0.40 | heimdal | Door Lock RPi |
| 192.168.0.50 | PiPunkt | Space Status RPi |
| 192.168.0.60 | TeraStation | NAS |
| 192.168.0.81 | LaserCutPC | LaserCutter |
| 192.168.0.100-199 | DHCP Range | |
| 192.168.0.230 | wifi | WiFi Access Point (TP-Link TL-WR841N) |
| 192.168.0.240 | wifi | WiFi Connection X350 3D Printer |
Getting a fixed IP address
If you need a fixed IP address, choose one that's not taken yet, and enter it in the table above. Done. There's currently no dedicated DNS, we'll tackle that eventually.
IPv6
We got native IPv6 \o/ IPv6 is broken, unfortunately. There is IPv6 on the Freifunk WiFi, if you really need it.
Uplink
We are connected to the internet via a Telekom V-DSL connection.
