CNC router build: Difference between revisions
Jump to navigation
Jump to search
| Line 45: | Line 45: | ||
* Omron EE-SX870p Photomicrosensor [https://www.ia.omron.com/product/item/2260/ (datasheet)] | * Omron EE-SX870p Photomicrosensor [https://www.ia.omron.com/product/item/2260/ (datasheet)] | ||
cabeling | |||
1=U / 2=V /3=W | |||
Break 5= Brown cable / 6= White cable | |||
''' Electrical ''' | ''' Electrical ''' | ||
* all endstops can be driven with 5 to 24V. | * all endstops can be driven with 5 to 24V. | ||
| Line 50: | Line 54: | ||
* all have a red led which goes out if they sense something | * all have a red led which goes out if they sense something | ||
* Some input [http://www.electronicspoint.com/threads/wiring-schematic-help-with-smc-solid-state-auto-switch-d-y7nw.274910/ here] | * Some input [http://www.electronicspoint.com/threads/wiring-schematic-help-with-smc-solid-state-auto-switch-d-y7nw.274910/ here] | ||
==Software == | ==Software == | ||
Revision as of 21:44, 21 December 2015
| CNC Mill Release status: experimental [box doku] | |
|---|---|
| Description | |
| Author(s) | Tarwin |
| Last Version | v0.1 |
We want to use the big-ass CNC portal Thomas rescued from the trash to build a CNC router.
Goals
- Mill Aluminium!
- route PCBs
- be open for extensions, easy tool change
Hardware
Motor System
X & Y Motors
Z Motor
- Berger-Lahr VRDM368 50LNBOB
- brake needs 24V to loosen, works.
Motor controllers
- 3x JMC 3M860
Power supplies
- 3x 70V 400W from China
Endstops
X & Y
- Type unknown
- Seems to be an Solid-state Auto Switch, not just a Reed sensor, same pinout as the SMC
Z
- SMC D-F9H (datasheet) (Solid-state Auto Switch, works like a PNP transistor)
- Omron EE-SX870p Photomicrosensor (datasheet)
cabeling 1=U / 2=V /3=W
Break 5= Brown cable / 6= White cable Electrical
- all endstops can be driven with 5 to 24V.
- Pinout is: brown: VCC / blue: GND / black: Signal
- all have a red led which goes out if they sense something
- Some input here
Software
Sub-projects
Fix up portal
- The portal needs to put together and fixed up
- Put portal together, replace belt - done
- identifiy / Test endstops - done
- Build portal frame - in progress (Thomas E)
- Try Z axis brake - done
Frame and table
- The X Axis is raised, the linear bearing runs far above the tool head. This implies a high center of gravity.
- Frame needs to be very stable
- Old workbench?
First draft:
Tool head
- needs to be powerful (Aluminium) and precise (pcbs)
- Find matching Spindle with driver and cooling - done
- Bought this: 2.2kw wassergekühlte Frässpindel
- This can be controlled manually on the inverter or over serial.
- needs its own fuse and a fault current fuse (FI Schutzschalter)
- Technical data:
- 2.2kW / 8,000 - 24,000 RPM
- ER20 spring collets (Spannbuchsen)
- Driver: HY02D223B
- water cooled
Software & Controller
- What will tell the drivers what to do? PC/parallel port, Mikrokontroller, old CNC hardware, ...
- Hardware? What do we need?
- Main page for this: CNC_router_software_eval
Pictures
Last picture of the portal before it ware put apart and brought to the space
