Storage space

From The Munich Maker Lab's Wiki
Revision as of 14:29, 11 July 2019 by David (talk | contribs) (cleanup)
Jump to navigation Jump to search

We need a concept for more personal storage in the space. Additional storage should cost some rent, but how much is still up for discussion. Let's collect some information here to make a well informed decision on what we should do.

Interested?

Are you interested in additional storage at the space? If so, how much would you need, and what for?


Boxes in Place

  • Box 1:
    • Top Shelf: Severin
    • Bottom Shelf: Tobi
  • Box 2:
    • Top Shelf: David&Theo
    • Bottom Shelf: ThomasE
  • Box 3:
    • Top Shelf: David&Theo
    • Bottom Shelf: ThomasE
  • Box 4:
    • Nico
  • Box 5 (in progress):
    • Top Shelf: Jan/German
    • Bottom Shelf: Severin
  • Box 6 (in progress):
    • Top Shelf: Jörg
    • Bottom Shelf: Andreas
  • Box 7 (in progress):
    • Top Shelf: MuMaLab Vorstand
    • Bottom Shelf: MuMaLab Supplies

Design

We went through a few iterations to find a decent one. Here it is

Storagebox01.png

Materials

  • 4x 38mm*58mm * 2m wood slats
  • 5x 2050mm*675mm * 15mm OSB sheets
  • 2x 2050mm*675mm * 12mm OSB sheets
  • 4x metal angles
  • 8x metal hinge
  • 2x door lock thingie
  • Wood screws
  • Wood glue

Missing:

  • Material for the middle shelf and the top of the box.

Cuts

  • 3 15mm OSB sheets each into
    • 1x 1200mm
    • 1x 785mm
  • 1 15mm OSB sheet into
    • 2x 785mm
  • 1 15mm OSB sheet into
    • 1x 785mm
  • 2 12mm OSB sheets each into
  • 2x 990mm * 525mm (maybe a little less)

Notes

  • Glue OSB sheets to wood slats for stability, add some screws
  • Hinges are screwed into the wood slats, and into the door. Doorside needs some smaller pieces of slat behind the OSB for stability (just the sections where the hinges are screwed in, not over the entire height).
    Storagebox02.png