Sidewinder X2: Difference between revisions

From The Munich Maker Lab's Wiki
Jump to navigation Jump to search
(update calibration)
(partial update)
Line 1: Line 1:
{{AttentionBox
{{AttentionBox
| title=This printer is not ready for public use yet.
| title=This printer is not entirely ready for public use yet.
| msg=The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :)
| msg=The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :)
}}
}}
{{ThingInfoBox
{{ThingInfoBox
|name        = Sidewinder X2
|name        = Sidewinder X2
Line 13: Line 12:
|financing  = Bought from official Vendor (€470)
|financing  = Bought from official Vendor (€470)
}}
}}


In addition to the two [[Prusa Mini|Prusa Minis]] which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.
In addition to the two [[Prusa Mini|Prusa Minis]] which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.
* Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly.
* Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly.
* The printer is now open to very experieced user and standard PLA Filament. Please ask on #3d_printing slack channel before usage.
* If you want to help calibrate the printer or help with the wiki site, please contact @yichen zhang on slack to get the newest update on the printer.


== Details ==
== Details ==
* Build volume 300 x 300 x 400 mm
* Build volume 300 x 300 x 400 mm
* UBL mesh bed leveling enabled
* Printable via USB Stick
* Printable via USB Stick
* Material: plain PLA
* Material: plain 1.75mm PLA  


== Usage ==
== Quickstart guide==
''' If you haven't used the printer, register for the monthly [https://tickets.mumalab.org/courses/ 3D printing intro course] or ask in the 3d_printing channel on Slack beforehand.'''
''' If you haven't used the printer, register for the monthly [https://tickets.mumalab.org/courses/ 3D printing intro course] or ask in the 3d_printing channel on Slack beforehand.''' <br>
'''INFO: As of 29.09.2022, this printer hasn't been included in 3D printing intro course'''
* Slice your .stl in [https://github.com/prusa3d/PrusaSlicer PrusaSlicer]
* Slice your .stl in [https://github.com/prusa3d/PrusaSlicer PrusaSlicer]
* Use the official presets for the Artillery Sidewinder X2 (same as for the X1)
* Use the official presets for the Artillery Sidewinder X2 (same as for the X1)
Line 29: Line 33:
** Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared
** Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared
** Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
** Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
** Edit the start Gcode under Printer setting in advanced mode and add M420 S1 Z2 after G28 command to [https://marlinfw.org/docs/gcode/M420.html enable mesh bed leveling]
* Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer
* Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer
* Verify that you're about to start the right print via the filename
* Verify that you're about to start the right print via the filename
Line 35: Line 40:
* Marlin Firmware on Ruby board has beed updated to 2.0.9.3
* Marlin Firmware on Ruby board has beed updated to 2.0.9.3
* TFT Firmware has been updated with Unified Icon
* TFT Firmware has been updated with Unified Icon
link [https://www.thingiverse.com/thing:5186707 Firmware ]
** Used [https://www.thingiverse.com/thing:5186707 Firmware] link
* Belt tightness checked  
* Belt tightness checked  
* Manual bed leveling done  
* Manual bed leveling done  
Line 42: Line 47:
* Probe offset set
* Probe offset set


== To do list ==
== Suggestions and Feedback ==
'''Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?'''
[[Category:Inventory]]
[[Category:Inventory]]
[[Category:3dPrinter]]
[[Category:3dPrinter]]

Revision as of 21:14, 29 September 2022

Attention Attention: This printer is not entirely ready for public use yet. Attention
The printer is currently getting set up. We will update this page when the printer can be used by the public. Thank you for your patience :)
     
Sidewinder X2

Status: beta [box doku]

Sidewinder x2.jpg
Description Artillery Sidewinder X2
Owner  MuMaLab
Financing  Bought from official Vendor (€470)


In addition to the two Prusa Minis which are our main 3d Printers at the lab we now have a Sidewinder X2 for larger print jobs.

  • Please bring your own filament and only use plain PLA. Additives like wood or carbon wear out the nozzles extremely quickly.
  • The printer is now open to very experieced user and standard PLA Filament. Please ask on #3d_printing slack channel before usage.
  • If you want to help calibrate the printer or help with the wiki site, please contact @yichen zhang on slack to get the newest update on the printer.

Details

  • Build volume 300 x 300 x 400 mm
  • UBL mesh bed leveling enabled
  • Printable via USB Stick
  • Material: plain 1.75mm PLA

Quickstart guide

If you haven't used the printer, register for the monthly 3D printing intro course or ask in the 3d_printing channel on Slack beforehand.
INFO: As of 29.09.2022, this printer hasn't been included in 3D printing intro course

  • Slice your .stl in PrusaSlicer
  • Use the official presets for the Artillery Sidewinder X2 (same as for the X1)
    • Add "Artillery" in the "Other Vendors" tab
    • Add the "Artillery Sidewinder X1" on the "Artillery FFF" tab that should have appeared
    • Select "Artillery Sidewinder X1 BL-TOUCH" as your printer
    • Edit the start Gcode under Printer setting in advanced mode and add M420 S1 Z2 after G28 command to enable mesh bed leveling
  • Get the USB stick that's in the printer, export to the USB via the button on the bottom right in PrusaSlicer, and put it back into the printer
  • Verify that you're about to start the right print via the filename

Finished Calibration

  • Marlin Firmware on Ruby board has beed updated to 2.0.9.3
  • TFT Firmware has been updated with Unified Icon
  • Belt tightness checked
  • Manual bed leveling done
  • Unified bed Mesh leveling done (EEPROM slot 1)
  • PID Autotune done for 215 nozzle / 60 bed
  • Probe offset set

To do list

Suggestions and Feedback

Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?