Archive:Printrbot Simple Maker's Kit

From The Munich Maker Lab's Wiki
Revision as of 07:38, 17 October 2017 by Siedi (talk | contribs)
Jump to navigation Jump to search
   
Creating Printrbot Simple Maker's Kit

Status: working [box doku]

Description 3D printer
Owner  Nils / Kojote
Financing  private

Details

  • Printing Volume 150 x 150 x 150 mm
  • Nozzle 0.4mm for 1,75mm
  • Plywood construction
  • held together by T-Slots
  • Printable via USB/ Octoprint (using external Raspberry)
    • Octoprint connected

Usage

If you have not used the printer your about to, ask AdrianMenzel on Slack beforehand

  • Slice your .stl in Simplify3D
  • Profile(called 'Printrbot Simple Makers Kit') is ready for PLA and Premium PLA on the Simplify 3d Slicer Software on the Laser PC
  • Upload your GCode onto the Octoprint Webinterface, available by the IP mentioned on the Network entry
  • For any Questions, contact AdrianMenzel on Slack
  • Costs: see 3D Printing

Notes

  • Don't use with ABS
  • Don't touch the fan! It's just glued on there.