Precious Plastic/Machines: Difference between revisions

From The Munich Maker Lab's Wiki
Jump to navigation Jump to search
(moved from Precious Plastic)
 
No edit summary
 
Line 1: Line 1:
[[/Cost|Money spent]] so far (not really complete)
[[Precious Plastic/Cost|Money spent]] so far (not really complete)


=== Shredder ===
== Shredder ==
Status: sort of working!
=== "Big" Shredder ===
* Hopper is falling apart, needs some glue
Our old shredder with the Katarina's shredding unit has been dismantled after it failed catastrophically, repeatedly.
* Funnel from shredder into the collection box needs improvement
* Axis of the shredder might be a bit crooked
* More information on motors and how to start them: [http://www.swibox.ch/fileadmin/user_upload/elektrokomponenten/Diverse_Grundlagen/Grundlagen_Drehstromasynchronmotoren.pdf Drehstromasynchronmotoren], [http://www.swibox.ch/fileadmin/user_upload/elektrokomponenten/Diverse_Grundlagen/Grundlagen_Starten_von_Motoren.pdf Starten von Motoren]
* Electronics: Got a softstarter, missing a direction switch. But that's for later.
** [https://www.rs-steiner.com/anleitungen/softstarter/eurostart.pdf Manual of the softstarter]


* Shredding unit still exists, is currently at KRAXLKOLLEKTIV for a new axle. Will be used for shredding by hand probably


=== Compression ===
=== Papershredders ===
Status:
We've done some tests with paper shredders.
* Oven finished
* Micro Cross Cut shredder (Amazon Basics) - Worked great, but the gears wore out, and its broken. Made nice and small pieces.
* Need to build "Compression unit"
** Useable for PP, PS, PLA, as long as they weren't thicker than 1mm
** To be combined with the extrusion machine
** Not usable for HDPE - didn't shred, just bend
* Regular Cross Cut shredder - Still works, but a bit bigger pieces.
** Output not usable for injection, but should be totally fine for the compression oven


=== Injection ===
 
Status:
== Compression ==
* Base: done
=== Oven One ===
* Hopper: done.
* Status: Broken and gone
* Missing the thread on the pipe, then it can be put together.
* Bottom heating element failed
 
=== Oven Two ===
* Status: Works
* More acurate temperature than Oven One
* Needs a frame still
* Needs a small fan for the electronics compartment
 
=== Compression Unit ===
* We still need some sort of press
 
== Injection ==
* Currently in storage in the old space.


Other stuff:
Other stuff:
* Some premade molds [https://www.techkits.com/collections/molds/]
* Some premade molds [https://www.techkits.com/collections/molds/]


=== Extrusion ===
== Extrusion ==
Status:
Status:
* Got the screw and pretty much most other parts
* Got the screw and pretty much most other parts

Latest revision as of 00:23, 9 December 2020

Money spent so far (not really complete)

Shredder

"Big" Shredder

Our old shredder with the Katarina's shredding unit has been dismantled after it failed catastrophically, repeatedly.

  • Shredding unit still exists, is currently at KRAXLKOLLEKTIV for a new axle. Will be used for shredding by hand probably

Papershredders

We've done some tests with paper shredders.

  • Micro Cross Cut shredder (Amazon Basics) - Worked great, but the gears wore out, and its broken. Made nice and small pieces.
    • Useable for PP, PS, PLA, as long as they weren't thicker than 1mm
    • Not usable for HDPE - didn't shred, just bend
  • Regular Cross Cut shredder - Still works, but a bit bigger pieces.
    • Output not usable for injection, but should be totally fine for the compression oven


Compression

Oven One

  • Status: Broken and gone
  • Bottom heating element failed

Oven Two

  • Status: Works
  • More acurate temperature than Oven One
  • Needs a frame still
  • Needs a small fan for the electronics compartment

Compression Unit

  • We still need some sort of press

Injection

  • Currently in storage in the old space.

Other stuff:

  • Some premade molds [1]

Extrusion

Status:

  • Got the screw and pretty much most other parts
  • Hopper already built
  • Missing the motor
Retrieved from "https://wiki.munichmakerlab.de/index.php?title=Precious_Plastic/Machines&oldid=5350"