View source for Network

== WiFi ==
* SSID: "munichmakerlab" or "munichmakerlab-5g"
* Security: WPA2 Personal. Preshared Key is written on the whiteboard.
* Mode: 802.11gn. No 802.11b. If you really really need to connect a 11Mbit/s only device, please talk to [[User:Tiefpunkt|tiefpunkt]]
=== Hardware ===
2 LANCOM L-320agn Wireless Access Points [http://www.lancom-systems.de/produkte/wireless-lan/indoor-wlan-access-points/lancom-l-320agn-wireless/lancom-l-320agn-wireless/], both manually configured (no WiFi controller)
* mumawireless01
** SSID "munichmakerlab"
** 2.4 Ghz
** Channel 1
* mumawireless02
** SSID "munichmakerlab" and "munichmakerlab-5g"
** 5Ghz
** Channel 108

== Network Segment ==
* Subnetmask: 255.255.0.0
* Gateway: 10.10.0.1
* DNS-Server: 10.10.0.10
* DHCP-Server: 10.10.0.1

=== Allocated IP Addresses ===
{| class="wikitable" width="100%"
! IP Address !! Name !! Description 
|-
| 10.10.0.1 || Router || Router
|-
| 10.10.0.10 || ns1 || DNS server (running on the docker01 host)
|-
| 10.10.10.20-250 ||  || DHCP Range
|-
| 10.10.20.10 || NyanPrint || [[Printers|Color Laser Printer]]
|-
| 10.10.20.24 || OctoPrint NEO 1 || [[Neo1]]  [http://neo1.local/ http://neo1.local/]
|-
| 10.10.20.25 || OctoPrint X400 || [[x400]] 
|-
| 10.10.20.40 || heimdal || [[Doorlock|Door Lock RPi]]
|-
| 10.10.20.50 || PiPunkt || [[SpaceMusic|Space Status RPi]]
|-
| 10.10.21.61 || hawking || [[Fileserver]] (deactivated)
|-
| 10.10.20.66 || docker01 || [[Docker]] Host
|-
| 10.10.20.81 || LaserCutPC || [[LaserCutter]]
|-
| 10.10.20.90 || MuMaShare || [[MuMaShare]]
|-
|  10.10.20.144 || Wasserschaden || [[User:Paul|Paul]] (bridge to the mesh)
|-
|}

==== Dead Hosts ====
{| class="wikitable" width="100%"
! IP Address !! Name !! Description 
|-
| 10.10.20.2 || FritzBox || VoIP Gateway (FritzBox 5050)
|-
| 10.10.20.25 || Alter OctoPrint Server || [[PrinterBot|OctoPrint]]
|-
| 10.10.20.26 || OctoPrint NEO 2|| [[Neo2]] [http://neo2.local/ http://neo2.local/]
|-
| 10.10.20.27 || OctoPrint X350 || [[X350]]  [http://x350.local/ http://x350.local/]
|-
| 10.10.20.28 || OctoPrint X400 || [[X400]] [http://x400.local/ http://x400.local/]
|-
| 10.10.20.31 || tokyo.local || [[LEDPanel|LED-Panel eth0]]
|-
| 10.10.20.32 || tokyo.local || [[LEDPanel|LED-Panel wlan0]]
|-
| 10.10.20.35 || - || [[Behringer x32| x32 Mixer]]
|-
| 10.10.20.61 || buffalo || [[Fileserver]] (hawking's old IP address)
|-
|-
| 10.10.20.82 || Terminal Server || ...
|-
| 10.10.20.91 || backup || [[Backup]] operator
|-
| 10.10.20.99 || StyroporPI || [[Foam_cutter]] raspi controlling the foam cutter
|-
| 10.10.20.110 || [[Startt]] || an octoprint server
|-
| 10.10.20.150 || ewindow || [[Virtual Machines]]
|-
|}
==== Getting a fixed IP address ==== 
If you need a fixed IP address, choose one that's not taken yet, and enter it in the table above. Done. There's currently no dedicated DNS, we'll tackle that eventually.

=== IPv6 ===
<del>We got native IPv6 \o/</del> IPv6 is broken, unfortunately. There is IPv6 on the Freifunk WiFi, if you really need it.

== DNS ==
DNS is provided by a docker bind image (https://github.com/sameersbn/docker-bind).

* Internal zone is "intern.munichmakerlab.de", not all hosts are in there yet
* Server is maintained via Webmin, check http://www.damagehead.com/blog/2015/04/28/deploying-a-dns-server-using-docker/ for details
* Server is not configured in DHCP yet, requires some testing first

=== Hostnames ===
When setting up a new machine for the space, the machine should be named after a famous scientist or mathematician whose birthday is today or near today. Use the following list to avoid already used hostnames:
==== Used hostnames ====
{| class="wikitable" width="100%"
! Hostname !! Device Type !! Location 
|-
| Doppler || PC || Workplace 2
|-
| Darwin || PC || Workplace 1
|-
| Heisenberg || PC || Spacemonitor near the entrance
|}

== Uplink ==
We are connected to the internet via a Telekom V-DSL connection.

== VPN ==
You can connect to the lab remotely, via OpenVPN. If you need access, contact [[User:JanS|JanS]].

[[Category:Infrastructure]]