LaserCAD

From The Munich Maker Lab's Wiki
Revision as of 11:25, 19 May 2019 by Simmarith (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Installation

  1. Download LaserCAD from [this website]
  2. Extract and install via setup.exe
  3. Open System Options (Ctrl + J)
  4. Set these Settings:

LaserCAD Settings1.PNG LaserCAD Settings2.PNG

Settings3.PNG

The next two pages have an export/import feature, so let's just use that: File:LaserCAD Configs.7z Now, in the main panel, use the "Select Mode" button and "Add" 10.10.20.80 to the list of machines and select it If that is set up correctly you can go to the control panel in LaserCAD and select the laser. Congratulations! You're ready to go.