3D Printing: Difference between revisions

From The Munich Maker Lab's Wiki
Jump to navigation Jump to search
m (typo)
(Add a section for useful links)
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Before using our printers, please attend the monthly introductory 3d printing workshop. You can register at https://tickets.mumalab.org/courses/.
== 3D printers ==
== 3D printers ==
There's a number of 3D printers at the space
There's a number of 3D printers at the space:
* [[Prusa Mini]] - Two beginner friendly Original Prusa Minis for printing PLA
* [[Ultimaker Unlimited Z|Ultimaker "Ulrich" Unlimited Z]] - Advanced printer with an extremely large Z height
* [[Sidewinder X2|Artillery Sidewinder X2]] - Advanced big format printer with a build area of 300mm x 300mm x 400mm as results of [[3dprinter4lab]] poll.


=== Beginner friendly ===
== Rules ==
* [[Rusa]] - Prusa Mini, prints PLA
* Do not print unsupervised. Check on your print at least every half hour or so. We really want to avoid damage to the printers and the potential fire hazard.
* [[Lusa]] - Prusa Mini, prints PLA
* Do not scrape with anything sharp on the build plates
 
* Do not use anything other than isopropyl alcohol on the build plates
=== Advanced printers ===
* If you need to do a nozzle change: Ask in the #3d_printinting channel on slack beforehand or ask someone from [[List of Contacts]]
* [[X350]]
* Do not print abrasive materials
* [[Ultimaker Unlimited Z|Ultimaker "Ulrich" Unlimited Z]]
* Power off printers after use


== Costs ==
== Costs ==
Maintenance for the printers and the materials costs time and money. We provide that from our free time and the Lab funds. If you want to use the printers we have at the space it would be really nice if you provide a little donation in the 3d print donation box. We'll figure out some standard for pricing soon.
The 3D printers are free to use, but please bring your own filament. We recommend you use original Prusament filament. The printers are provided with space funds and our own free time, so please clean up after yourself and notify someone (e.g. in Slack or at [[List of Contacts]]) if something goes wrong.
 
Please bring your own fillament. We recommend you use original Prusament fillament.


== Slicing ==
== Slicing ==
To get good results we recommend using [https://github.com/prusa3d/PrusaSlicer PrusaSlicer] (also see [[PrusaSlicer]] on our wiki). We're theoretically providing a custom build, but it's a little out of date. You can, in the meantime, install PrusaSlicer yourself and use [https://github.com/munichmakerlab/slic3r-config our config bundle].
To get good results we recommend using [https://github.com/prusa3d/PrusaSlicer PrusaSlicer] (also see [[PrusaSlicer]] on our wiki).


== Useful Resources ==
* STL files can be found (for example) at [https://www.thingiverse.com/ Thingiverse], which has the most files but a somewhat bad search function, or at [https://www.printables.com/ Printables by Prusa], which is a new and more fancy site.
* [https://www.stlfinder.com/ STLFinder] is a meta search engine. It mostly returns results from Thingiverse, but they are quite often better than those of Thingiverse's own search.
* The YouTube channel [https://www.youtube.com/c/CNCKitchen CNCKitchen] has very scientific and useful overviews on how slicing parameters affect the print, and much more.
[[Category:3dPrinter]]
[[Category:3dPrinter]]

Revision as of 00:48, 9 October 2022

Before using our printers, please attend the monthly introductory 3d printing workshop. You can register at https://tickets.mumalab.org/courses/.

3D printers

There's a number of 3D printers at the space:

Rules

  • Do not print unsupervised. Check on your print at least every half hour or so. We really want to avoid damage to the printers and the potential fire hazard.
  • Do not scrape with anything sharp on the build plates
  • Do not use anything other than isopropyl alcohol on the build plates
  • If you need to do a nozzle change: Ask in the #3d_printinting channel on slack beforehand or ask someone from List of Contacts
  • Do not print abrasive materials
  • Power off printers after use

Costs

The 3D printers are free to use, but please bring your own filament. We recommend you use original Prusament filament. The printers are provided with space funds and our own free time, so please clean up after yourself and notify someone (e.g. in Slack or at List of Contacts) if something goes wrong.

Slicing

To get good results we recommend using PrusaSlicer (also see PrusaSlicer on our wiki).

Useful Resources

  • STL files can be found (for example) at Thingiverse, which has the most files but a somewhat bad search function, or at Printables by Prusa, which is a new and more fancy site.
  • STLFinder is a meta search engine. It mostly returns results from Thingiverse, but they are quite often better than those of Thingiverse's own search.
  • The YouTube channel CNCKitchen has very scientific and useful overviews on how slicing parameters affect the print, and much more.