Archive:DustCollectionSystem

From The Munich Maker Lab's Wiki
Revision as of 15:16, 10 September 2022 by Vrs (talk | contribs) (Vrs moved page DustCollectionSystem to Archive:DustCollectionSystem without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Attention.png You are visiting an old wiki page. The information found on "DustCollectionSystem" might be out of date.

Our workshop should have a dust collection system for woodworking.

A fixed system should be in place which has a couple of outlets with blast gates and flex hoses to connect wood working power tools as needed.

Since we only have machines with small extraction outlets < 60mm the large (4 inch / 100mm) dust collector is not feasable for them. It might howewer be used for the CNC machines.

Find a cheap, used shop vac with automatic switch on. Or build own housing for an vacuume motor with an automatic switch. (https://www.amazon.de/Eltako-4825410-AR12DX-230V-Stromrelais/dp/B001BBZVU6/ref=sr_1_25?keywords=Einschaltautomatik&qid=1577803443&sr=8-25)

Connect vaccum to a zyklon dust seperator. Run some pipes from the zyklon to 1 or 2 wall plugs where a flex hose can be connected (https://www.amazon.de/Original-K%C3%A4rcher-Universal-Schlauchkupplung-Plus-Staubbeutel-Profi%C2%AE/dp/B07254F29R/)

https://www.mersch-reinigungstechnik.de/shop/wg/nass-trockensauger/muffen-und-adapter/

Retrieved from "https://wiki.munichmakerlab.de/index.php?title=Archive:DustCollectionSystem&oldid=6452"