Archive:Sheet Storage
Jump to navigation
Jump to search
We need a place to carefully store all the wooden and acrylic plates we cut in our laser.
Requirements
- Size: Sheet size usually 100x80, so this is the minimum
- The sheets have to be stores on a plain, stable surface. We don't want to have the sagged material you typically get from the Baumarkt.
- We need several shelves to sort the material and get easy access to them (min. 3?)
- A few of our members want to store their own sheets and would rent space for it. Means maybe 3 additional shelves.
Proposal 1: Horizontal Mounting
Description:
- It is based on an Europalette with the size of 120x80cm. We can easily move it with the forklift then.
- In the bottom, there is room for the waste (small Mörtelwannen) separated in acrylic and wooden parts maybe.
- We add several shelves on top of it. Depending on the gap, we can have 6-8 of them.
- For each shelf, we use wooden slats instead of flake boards, Otherwise the whole construction might become to heavy.
Advantages:
- Material lies flat on the ground and cannot bend.
- We can just pile up in the high and have more space.
- Easy to build
- Cheap
Disadvantage:
- Plates are lying on each other, so it becomes a little bit more difficult to get them out (when sorted, should not be a problem).
Costs:
For the base construction
Europalette | OSB Platte 800x675x12mm | OSB Platte 1230x675x12mm | OSB Platte 2050x675x12mm | Holzlatte 200x5,8x7,8cm |
1 | 2 | 1 | 2 | 4 |
- € | - € | - € | 3,30 € | 2,98 € |
- € | - € | - € | 6,60 € | 11,92 € |
That is roughly 20 €.
For one shelf:
Latte 120x4,8x2,4cm | Latte 250x4,8x2,4cm | Latte 80x5,8x3,8cm | Latte 200x5,8x3,8cm |
6 | 3 | 2 | 1 |
- € | 0,80 € | - € | 1,48 € |
- € | 2,40 € | - € | 1,48 € |
That is roughly 4 € per shelf.
With 6 shelves the total amount is 44 €, with some chevrons and screws, roughly 50 €