Virtual Machines

From The Munich Maker Lab's Wiki
Revision as of 05:24, 15 February 2016 by Jorgen (talk | contribs) (→‎Access)
Jump to navigation Jump to search

We are running a KVM host to run virtual machines on in the space.

Access

URL: https://10.10.20.62:8006

If you need a user, contact Severin

Hardware

There is currently one VM host running in the basement:

  • 2x Intel Xeon 2,0 Ghz
  • 18 GB RAM
  • 2x 150GB (RAID1) Boot drives
  • 8x 500GB data drives (in a ZFS RAIDZ2, leaving about 2.8 TB of space)

Software

We are running Proxmox on the machine. Installation was done manually on a Debian Jessie install roughly following Proxmox's guide, as their standard installer does not support software RAID for boot devices, and didn't recognise our additional SATA controller.

There are two working datastores, one called "internal" which points to the ZFS raid array, and another called "local" which is on the boot drives. Use the one on the bootdrives for ISO images, and the ZFS array for everything else. Ideally, ISO images will be pulled from the fileserver, but that just hasn't been successfully setup yet.