Bambulab P1S
Bambulab P1S + AMS Status: working [box doku] | |
---|---|
![]() | |
Description | Bambulab P1S + AMS |
Owner | MuMaLab |
Financing | Bought from official Vendor (€877) |
Build Volume | 256x 256x 256 mm (11.8 x 11.8 x 15.7 in) |
Nozzle | 0.4 mm stainless steel |
TBD
Details
TBD
Quickstart guide
TBD
Machine operation
Connecting to the Printer
- Go to the printer page in Bambu Studio

- Click on "No Printer" to open the dropdown

- Select the only printer that shows up

- Enter the access code you can get from the printers settings

And that's it! You should be able to run calibration for your filament, send a print and watch it with the webcam now. Beware that this *should* only work from the munichmakerlab WiFi.
Calibrating your own filament
If you bring non-bambu filament you'll probably have to calibrate it first. For this you'll need the official BambuStudio slicer as calibration does not appear to work with orcaslicer.
Insert filament
[comming soon]
Unload filament
[comming soon]
Start a print job
[comming soon]
Unified bed leveling
[comming soon]
Guide Video
[comming soon]
Finished calibration
TBD
Suggestions and Feedback
Do you have any suggestions or feedback in regard to the printer, its maintainance and its current status?
Please write your comments below!
- [Comment]