Archive:CNC router software eval

You are visiting an old wiki page. The information found on "CNC router software eval" might be out of date.

Part of CNC router build

We need to find the best Software stack to drive our CNC mill.

The tool chain need three parts:

• CAD/CAM Systems (to produce gcode from 3D model)
• CNC Controller Software (to feed the gcode to the machine)
• Software on Controller to translate gcode into stepper commands (can be part of CNC Controller)

Requirements

• more or less easy to use
• manual operation with external controller possible
• not to expensive
• fast
• Able to control break on Z axis

possible Solutions

Smoothie board

• CNC Contoller

Todo

• Evaluate Controller Software
• Find matching controller Hardware (like this or that.)

Input

• http://www.freebyte.com/cad/cadcam.htm#cadcamsystems
• http://www.shapeoko.com/wiki/index.php/CAM

Generating G-Code

• • F-Engrave - DXF to GCode, single pass only
  • gcodetools for Inkscape (not tested yet)
  • dxf2gcode (not tested yet)
  • image2gcode online, not tested yet
• PyCAM (not tested)
  • http://pepijndevos.nl/2012/04/23/fast-pycam-on-mac-using-homebrew.html
• http://simplegcoder.com/ (not tested)
• https://sites.google.com/site/heekscad/home/Details (not tested)