Doorlock
| Doorlock Release status: experimental [box doku] | |
|---|---|
| Description | Electronic door lock for the new space |
| Author(s) | tarwin, tiefpunkt |
| Download | https://github.com/munichmakerlab/doorlock |
Our new space has a super smart electronic lock, which we mostly designed ourselves. Woopwoop!
Theory
We needed a lock that allows us to hand out as many "keys" as we like, but without making it super complicated to use. A lot of hackerspaces used SSH keys as "keys" to their space. For us, that's not user friendly enough, as we expect quite a few non-technical folks to have access to the space
After discussions, we settled for a two-factor system, using RFID cards and PINs. Additional means to authenticate may be introduced at another point in time.
Hardware
Frontend
RFID reader, pinpad, and LCD display, connected to an Arduino.
Prototype used an Arduino Uno, which is a little short on pins. A buzzer would be nice, and we currently can't control the backlight of the LCD.
Current version is still based on an Arduino (a smaller one), a LCD display, and the RFID reader, all in a nice 3D printed case.
Locking Mechanism
We got a motor lock on eBay, together with its electronics, and we'll use that. It's a Dorma SVP 2000 series lock.
The electronics have a set of contacts that can be used to get the status of the lock, as well as to lock and unlock it. We currently just use the pins to (un)lock it.
Backend
A Raspberry Pi, which is connected to the frontend over a serial connection (via a USB thingie), and has the motor lock electronics connected via its GPIOs and a relay. No status checks are being done yet.
Schema
+-----------+
| RFID |
+-(SPI)--+ Reader |
| +-----------+
+--------------+ +---------------+ |
| | | | | +-----------+
| RaspberryPi +----(UART)----+ Arduino +--+----------+ Keypad |
| | | (frontend) | | +-----------+
+------+-------+ +---------------+ |
| | +-----------+
(Relais board) +--+ Display |
| +-----------+
+-----+------+
| Door lock |
+------------+
Software
Hosted on Github: https://github.com/munichmakerlab/doorlock, contains both the frontend firmware as well as the software for the backend.
The backend runs on the RPi, and uses a SQLite database to store RFID and PIN information. The "manage_db.py" script can be used to maintain that database.
Pictures
On our tumblr:
- http://log.munichmakerlab.de/post/108441721925/taking-apart-our-motorized-door-lock-we-got-a
- http://log.munichmakerlab.de/post/110074434770/we-build-our-own-door-lock-system-but-the
- http://log.munichmakerlab.de/post/117603378425/a-control-panel-for-our-door-lock-up-until-now
ToDo
- Make the backend more maintainable
- Allow for better integration with other applications, such as potentially the laser cutter and a cashless payment system.
