DC Microgrid/consume01: Difference between revisions

Revision as of 16:25, 18 October 2019

DC consume01 Release status: beta [box doku]

Description	12V power meter and distribution box
Author(s)	Severin
Last Version	0.1

A 12V power meter and distribution unit.

The GC90 power meter can deal with up to 100V DC at 20A. It also has a TTL port via USB connector.

Add fuses
- These resettable fuses can deal with up to 48V (depending on the rating, some only with lower voltages): Reichelt
- Bigger DC fuses are available here at solarbag (probably not for this part of the setup though)
Option for 48V -> 12V converter
additional connectors, like USB, USB-C, passive PoE...

We want to transmit voltage/current/power usage via LoRaWAN. The power meter can output that data via its TTL USB port.

First test with a ProMini LoRaWAN node and a level shifter

@@ Line 20: / Line 20: @@
 == Improvements ==
-* Connect LoRaWAN Arduino to power meter and transmit voltage/current/power usage
 * Add fuses
 ** These resettable fuses can deal with up to 48V (depending on the rating, some only with lower voltages): [https://www.reichelt.de/rueckstellbarer-geraeteschutzschalter-5-0a-t9-611p-5a-p69579.html?&trstct=pol_0 Reichelt]
@@ Line 26: / Line 25: @@
 * Option for 48V -> 12V converter
 * additional connectors, like USB, USB-C, passive PoE...
+=== LoRaWAN ===
+We want to transmit voltage/current/power usage via LoRaWAN. The power meter can output that data via its TTL USB port.
+{|
+| [[File:Microgrid-consume01-lorawan01.jpg|thumb|300px|First test with a ProMini LoRaWAN node and a level shifter]]
+|}
 [[Category:Project]]