Archive:Sheet Storage: Difference between revisions
Jump to navigation
Jump to search
You are visiting an old wiki page. The information found on "Sheet Storage" might be out of date.
(Created page with "We need a place to carefully store all the wooden and acrylic plates we cut in our laser. == Requirements == * Size: Sheet size usually 100x80, so this is the minimum * The s...") |
m (Vrs moved page Sheet Storage to Archive:Sheet Storage) |
||
| (8 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{outdated}} | |||
We need a place to carefully store all the wooden and acrylic plates we cut in our laser. | We need a place to carefully store all the wooden and acrylic plates we cut in our laser. | ||
== Requirements == | == Requirements == | ||
* Size: Sheet size | * Size: Sheet size typically is 100x80cm, so this is the minimum per shelf. | ||
* The sheets have to be | * The sheets have to be stored on a plain, stable surface. We don't want to have the sagged and bended material you typically get from the Baumarkt. | ||
* We need several shelves to sort the material and get easy access to them (min. 3?) | * We need several shelves to sort the material and get easy access to them (min. 3?) | ||
* A few of our members want to store their own sheets and would rent space for it. Means maybe 3 additional shelves. | * A few of our members want to store their own sheets and would rent space for it. Means maybe 3 additional shelves. | ||
| Line 11: | Line 12: | ||
[[File:Plattenlager.png|thumb]] | [[File:Plattenlager.png|thumb]] | ||
===Description | ===Description=== | ||
* It is based on an Europalette with the size of 120x80cm. We can easily move it with the forklift then. | * It is based on an Europalette with the size of 120x80cm. We can easily move it with the forklift then. | ||
* In the bottom, there is room for the waste (small Mörtelwannen) separated in acrylic and wooden parts maybe. | * In the bottom, there is room for the waste (small Mörtelwannen) separated in acrylic and wooden parts maybe. | ||
* We add several shelves on top of it. Depending on the gap, we can have 6-8 of them. | * We add several shelves on top of it. Depending on the gap, we can have 6-8 of them. | ||
* For each shelf, we use wooden slats instead of flake boards, Otherwise the whole construction might become to heavy. | * For each shelf, we use wooden slats instead of flake boards, Otherwise the whole construction might become to heavy. | ||
* Might need some more cross connections to stabilize (or plank with more OSB) | |||
===Advantages | ===Advantages=== | ||
* Material lies flat on the ground and cannot bend. | * Material lies flat on the ground and cannot bend. | ||
* We can just pile up in the high and have more space. | * We can just pile up in the high and have more space. | ||
| Line 23: | Line 25: | ||
* Cheap | * Cheap | ||
===Disadvantage | ===Disadvantage=== | ||
* Plates are lying on each other, so it becomes a little bit more difficult to get them out (when sorted, should not be a problem). | * Plates are lying on each other, so it becomes a little bit more difficult to get them out (when sorted, should not be a problem). | ||
===Costs | ===Costs=== | ||
For the base construction | For the base construction | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
|- | |- | ||
| Europalette | | Europalette | ||
| 1 | |||
| - € | |||
| - € | |||
|- | |||
| OSB Platte 800x675x12mm | | OSB Platte 800x675x12mm | ||
| 2 | |||
| - € | |||
| - € | |||
|- | |||
| OSB Platte 1230x675x12mm | | OSB Platte 1230x675x12mm | ||
| 1 | |||
| - € | |||
| - € | |||
|- | |||
| OSB Platte 2050x675x12mm | | OSB Platte 2050x675x12mm | ||
| 2 | |||
| 3,30 € | |||
| 6,60 € | |||
|- | |||
| Holzlatte 200x5,8x7,8cm | | Holzlatte 200x5,8x7,8cm | ||
| 4 | |||
| 2,98 € | |||
| 11,92 € | |||
|} | |||
That is roughly 20 €. | |||
For one shelf: | |||
{| class="wikitable" border="1" | |||
|- | |||
| Holzlatte 120x4,8x2,4cm | |||
| 6 | |||
| - € | |||
| - € | |||
|- | |||
| Holzlatte 250x4,8x2,4cm | |||
| 3 | |||
| 0,80 € | |||
| 2,40 € | |||
|- | |||
| Holzlatte 80x5,8x3,8cm | |||
| 2 | |||
| - € | |||
| - € | |||
|- | |- | ||
| Holzlatte 200x5,8x3,8cm | |||
| 1 | | 1 | ||
| | | 1,48 € | ||
| 1,48 € | |||
|- | |||
| MDF 120x80x0,3cm | |||
| 1 | | 1 | ||
| 2 | | 4,00 € | ||
| 4 | | 4,00 € | ||
|} | |||
That is roughly 8 € per shelf. | |||
With 6 shelves the total amount is 68 €, with some chevrons and screws, roughly 75 € | |||
==Proposal 2: Vertical Mounting== | |||
[[File:Plattenlager_quer.png|thumb]] | |||
===Description=== | |||
* It is based on an Europalette with the size of 120x80cm. We can easily move it with the forklift then. | |||
* We use OSB as separators between the shelves. Depending on the distance, we get 4-6. | |||
* For each shelf we us OSB as it is cheap and relatively stable. We mount the OSB with an angle of, e.g. 10°, so that the plates lie on them and do not bend (something from steel would be even better but is more expensive and difficult to build). | |||
===Advantages=== | |||
* Material lies relatively flat on the ground and cannot bend (still the OSB might bend over time, but can be replaced then easily). | |||
* Sheets can be easily accessed. | |||
===Disadvantage=== | |||
* Costs are higher. | |||
* Less shelves, need probably two of them (or pile them). | |||
* With the angle of the shelves, might be more complex to build accurately. | |||
===Costs=== | |||
For the base construction | |||
{| class="wikitable" border="1" | |||
|- | |- | ||
| Europalette | |||
| 1 | |||
| - € | | - € | ||
| - € | |||
|- | |||
| OSB Platte 800x675x12mm | |||
| 2 | |||
| - € | | - € | ||
| - € | | - € | ||
|- | |- | ||
| OSB Platte 1230x675x12mm | |||
| 1 | |||
| - € | | - € | ||
| - € | | - € | ||
| | |- | ||
| OSB Platte 2050x675x12mm | |||
| 2 | |||
| 3,30 € | |||
| 6,60 € | | 6,60 € | ||
| | |- | ||
| Holzlatte 68x5,8x5,8cm | |||
| 2 | |||
| - € | |||
| - € | |||
|- | |||
| Holzlatte 108x5,8x5,8cm | |||
| 2 | |||
| - € | |||
| - € | |||
|- | |||
| Holzlatte 140x5,8x5,8cm | |||
| 4 | |||
| - € | |||
| - € | |||
|- | |||
| Holzlatte 200x5,8x5,8cm | |||
| 6 | |||
| 2,44 € | |||
| 14,64 € | |||
|} | |} | ||
That is roughly | That is roughly 22 €. | ||
For one shelf: | For one shelf: | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
|- | |- | ||
| | | OSB Platte Typ2 800x1400x15mm | ||
| 1 | | 1 | ||
| - € | | - € | ||
| - € | | - € | ||
|- | |- | ||
| | | OSB Platte Typ2 pro m2 | ||
| | | 1,12 | ||
| | | 10,95 € | ||
| | | 12,26 € | ||
|- | |||
| Rundstange 80cm 8mm | |||
| 1 | |||
| 1,40 € | |||
| 1,40 € | |||
|} | |} | ||
That is roughly | That is roughly 14 € per shelf. | ||
With | With 4 shelves the total amount is 78 €, with some chevrons and screws, roughly 85 € | ||
Latest revision as of 15:44, 10 September 2022
You are visiting an old wiki page. The information found on "Sheet Storage" might be out of date.We need a place to carefully store all the wooden and acrylic plates we cut in our laser.
Requirements
- Size: Sheet size typically is 100x80cm, so this is the minimum per shelf.
- The sheets have to be stored on a plain, stable surface. We don't want to have the sagged and bended material you typically get from the Baumarkt.
- We need several shelves to sort the material and get easy access to them (min. 3?)
- A few of our members want to store their own sheets and would rent space for it. Means maybe 3 additional shelves.
Proposal 1: Horizontal Mounting
Description
- It is based on an Europalette with the size of 120x80cm. We can easily move it with the forklift then.
- In the bottom, there is room for the waste (small Mörtelwannen) separated in acrylic and wooden parts maybe.
- We add several shelves on top of it. Depending on the gap, we can have 6-8 of them.
- For each shelf, we use wooden slats instead of flake boards, Otherwise the whole construction might become to heavy.
- Might need some more cross connections to stabilize (or plank with more OSB)
Advantages
- Material lies flat on the ground and cannot bend.
- We can just pile up in the high and have more space.
- Easy to build
- Cheap
Disadvantage
- Plates are lying on each other, so it becomes a little bit more difficult to get them out (when sorted, should not be a problem).
Costs
For the base construction
| Europalette | 1 | - € | - € |
| OSB Platte 800x675x12mm | 2 | - € | - € |
| OSB Platte 1230x675x12mm | 1 | - € | - € |
| OSB Platte 2050x675x12mm | 2 | 3,30 € | 6,60 € |
| Holzlatte 200x5,8x7,8cm | 4 | 2,98 € | 11,92 € |
That is roughly 20 €.
For one shelf:
| Holzlatte 120x4,8x2,4cm | 6 | - € | - € |
| Holzlatte 250x4,8x2,4cm | 3 | 0,80 € | 2,40 € |
| Holzlatte 80x5,8x3,8cm | 2 | - € | - € |
| Holzlatte 200x5,8x3,8cm | 1 | 1,48 € | 1,48 € |
| MDF 120x80x0,3cm | 1 | 4,00 € | 4,00 € |
That is roughly 8 € per shelf.
With 6 shelves the total amount is 68 €, with some chevrons and screws, roughly 75 €
Proposal 2: Vertical Mounting
Description
- It is based on an Europalette with the size of 120x80cm. We can easily move it with the forklift then.
- We use OSB as separators between the shelves. Depending on the distance, we get 4-6.
- For each shelf we us OSB as it is cheap and relatively stable. We mount the OSB with an angle of, e.g. 10°, so that the plates lie on them and do not bend (something from steel would be even better but is more expensive and difficult to build).
Advantages
- Material lies relatively flat on the ground and cannot bend (still the OSB might bend over time, but can be replaced then easily).
- Sheets can be easily accessed.
Disadvantage
- Costs are higher.
- Less shelves, need probably two of them (or pile them).
- With the angle of the shelves, might be more complex to build accurately.
Costs
For the base construction
| Europalette | 1 | - € | - € |
| OSB Platte 800x675x12mm | 2 | - € | - € |
| OSB Platte 1230x675x12mm | 1 | - € | - € |
| OSB Platte 2050x675x12mm | 2 | 3,30 € | 6,60 € |
| Holzlatte 68x5,8x5,8cm | 2 | - € | - € |
| Holzlatte 108x5,8x5,8cm | 2 | - € | - € |
| Holzlatte 140x5,8x5,8cm | 4 | - € | - € |
| Holzlatte 200x5,8x5,8cm | 6 | 2,44 € | 14,64 € |
That is roughly 22 €.
For one shelf:
| OSB Platte Typ2 800x1400x15mm | 1 | - € | - € |
| OSB Platte Typ2 pro m2 | 1,12 | 10,95 € | 12,26 € |
| Rundstange 80cm 8mm | 1 | 1,40 € | 1,40 € |
That is roughly 14 € per shelf.
With 4 shelves the total amount is 78 €, with some chevrons and screws, roughly 85 €
