|
|
| (12 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| In order to show what's going on at and around the space, we've decided to create a weekly newsletter. Here's the archives | | In order to show what's going on at and around the space, we've decided to create a weekly newsletter. |
|
| |
|
| <div class="toclimit-1">__TOC__</div>
| | We started archiving them here, more recent newsletters can be found in the [https://lists.munichmakerlab.de/pipermail/discuss/ Mailinglist Archives]. |
| == CW 46 ==
| |
| === Internet of fridges ===
| |
| Even though it doesn't load Google Calendar, we still have an internet-connected fridge now. It let's us know when someone opened the door, and how cold it is inside. Right now, it just triggers the traffic light, and shows the temperature on one of the dashboards on the Wall of Monitors. If you have any ideas what else we can do with it, talk to Peter!
| |
|
| |
|
| === New space status ===
| | Previous years: |
| We have an awesome new space status switch. Well, more like "refurbished", since it's since the same switch, but it's been super upgraded with lights and things: https://www.instagram.com/p/BM4M64JBcEC/. Many many thanks to Paul, Adrian and Heiko for making that happen. Now, there's really no excuse not to switch it on when you're the first one at the space.
| | * [[Archive:Newsletter/2016|2016]] |
|
| |
|
| === Electronics corner fixup ===
| | Please contribute to the newsletter, by posting to #newsletter in our [https://slack.munichmakerlab.de/ Slack], or by adding content directly, as described in our [[Archive:Newsletter/HowTo|HowTo]]. |
| We cleaned and fixed up the electronics corner (isn't it beautiful: https://www.instagram.com/p/BM1D62mhyfa/ ). Now all (well, except for one) gadgets in the shelves above are connected to power, so you can measure all things int your circuits, without having to look for the right power plug in that mess.
| |
|
| |
|
| === Lost and Found === | | <div class="toclimit-1">__TOC__</div> |
| We sorted through the "Stuff from the table" box again, here's what's in the "Last Chance" box now: http://pasteboard.co/sGrwNkEV6.png. If it's yours, grab it and store it away safely.
| |
|
| |
|
| === Space shutdown mode === | | == CW 04 == |
| With the new space status, we also redid some of the automation stuff connected to it. Now, the space status controls power to the electronics corner, the monitor wall, and soon also the sound system. They turn on when you open up the space, and shut down 30s after you close it with the status switch. Because safety and stuff.
| | === Plenum === |
| | | Our shortest Plenum ever, with only 20 minutes runtime! |
| === Air compressor === | | You can find the protocol here: https://wiki.munichmakerlab.de/wiki/20170126_Plenum |
| ThomasE finished the chamber in the basement for the compressor, and the tubing for getting compressed air around the space. Pretty neat, and big thanks! Next up is some electric wiring, to make sure the compressor gets switched off when it's not needed etc. Any ideas on how to do that best?
| |
| | |
| === Laser Log ===
| |
| Heiko has recovered some data from the laser hour counter, which we thought was lost when the whole VM thing came crashing down. So we got that back, and you can see some of it on one of the dashboards on the monitor wall. But if you have any other ideas on what to do with that, let us know. What we have is a database of laser job durations with timestamps. Crazy statistics which days are more laser than other ones? Let's make that into something cool.
| |
| | |
| == CW 45 ==
| |
| === It's the... eye of the laser! ===
| |
| We installed a camera system into the laser cutter: http://log.munichmakerlab.de/post/153098556845/implementing-a-camera-into-our-lasercutter-to. It's not for time-lapse videos but to monitor the cutting process from below (to see if the beam penetrates).
| |
| The camera isn't fixed yet and a second channel on the display is still free. If anybody has a camera module sitting around we can maybe use it there.
| |
| | |
| === Monitor wall ===
| |
| It's been planned for a while, and we finally got the first two screens onto our new wall of monitors. Next to the lasers, we have two displays on a pole, cycling through a set of websites and dashboards: https://www.instagram.com/p/BMtBfJNBVEA/ There are more to come, once we got new Orange Pi One boards to control them. If you have any ideas on what we shoul display on theose screens, let Heiko or Severin know. Also, if you have any WhateverPi board that you want to donate to the space, let use know as well, and we'll build it into the next screen we put up.
| |
|
| |
|
| === The Thingsnetwork Munich meetup === | | === Member Stuff and Space Shutdown reminder === |
| Last thursday, we had the first The Thingsnetwork Munich meetup at our space. There was a talk by Wienke Giezeman, one of the TTN founders, and some great discussions. We have more awesome talks planned, so stayed tuned for those announcements.
| | we already took one of the work tables in the middle of the space out and set up pallets for you to start packing your stuff on. Again, please put your member boxes (up to three) on there. They have to be closed with a lid, taped shut, and properly labeled. Everything that's not on there until Feb 12th is fair game for give-away for donations, which will be for building the new space. |
| | |
| == CW 44 ==
| |
| === Talks on Thursdays ===
| |
| We had our first Talks on Thursdays this week. Severin told about 15 visitors and members about the Erfindergarden (a new fablab in Munich), and the current state of the eWindow.
| |
| We try to make a thing out such talks. If you like to present a cool project, talk about some specific topic or showcase something, the stage is set. =D
| |
| | |
| === ToDos ===
| |
| We have a new thing to collect things that need to be done: http://log.munichmakerlab.de/post/152817251120/we-got-a-fancy-new-todo-list-thingie-in-the-space Grab some tasks, and make them to move towards the right columns!
| |
| | |
| === More parts organizer shelf space ===
| |
| Remember when Heiko built the first rack to keep our parts boxes? Turns out we have too many of those. So he built an even bigger one \o/ Very big thanks. Now we can keep the parts boxes in the big one, and use the smaller one for personal cases. Feel free to move yours from the membershelves over to the small rack, so we have a bit more space back there.
| |
| | |
| === Big meetup next Thursday ===
| |
| Electronica is coming up next week, and some of the The Thingsnetwork folks are in Munich. So they're doing a meetup, and it'll be at our space. If you're interested in LoRaWAN and the whole IoT craziness, pass by. It might get full ;)
| |
| | |
| == CW 43 ==
| |
| === T-shirts! ===
| |
| Happy people have awesome MuMaLab Shirts! We ordered a few extra in different sizes. If you want one, ask Severin, JanS or Peter.
| |
| | |
| === Air compressor ===
| |
| We repaired the air compressor that Liviu organized. ThomasE will lead the effort to get all that air to places where it can do some good, so please help him in any way you can.
| |
| | |
| === Space cleanliness ===
| |
| Thursday evening... the space was so clean! Awesome and thanks to the people who cleaned without beeing asked to 👍🏼
| |
| | |
| === Virtual Machine Server ===
| |
| Last week our virtual machine server died due to a bunch of failing hard drives. Sadly, not everything on there was backed up, so some things, like our VPN access VM, were lost.
| |
| But JanS is in the final steps of putting in new disks, and getting the thing back up and running. Thank you :)
| |
| | |
| === LoRaWAN ===
| |
| We built a small LoRaWAN client, with a GPS unit, and did some tests of our gateway. Turns out things are not quite ideal yet. One of the things contributing might be the antennas we're using. New ones to test with have been ordered, so we'll do some more tests next week.
| |
| | |
| === eWindow ===
| |
| We've made some progress on the eWindow -> http://log.munichmakerlab.de/post/152284780155/working-on-our-ewindow-which-is-supposed-to. Severin has built a WebRTC thing for it, so the video part works fairly well now. Next steps are working on the UI, both from the hardware, as well as the software side, and then getting that stuff out into the other spaces. Help is very much appreciated, especially if you have some JS skills. The current code is on github: https://github.com/munichmakerlab/ewindow_webrtc
| |
| | |
| == CW 42 ==
| |
| === Neberaum warning light ===
| |
| There's now a warning light next to the main door in the space, indicating whether the Nebenraum is properly locked (http://log.munichmakerlab.de/post/151951056930/every-once-in-a-while-someone-forgets-to-lock-the). If it lights up when you're about to leave, please check and lock the door to the Nebenraum properly. Note that the light only goes out after two key turns.
| |
| | |
| === Soldering tip burnout ===
| |
| The soldering tip of our main soldering station wasn't looking so good. This is probably because it was left on for a long amount of time. Please always make sure that you turn it off after using it. Can't hurt to check whether everything is switched off befor you leave the space as well. In the meantime, we got some new tips: http://log.munichmakerlab.de/post/152119009665/old-vs-new-today-with-soldering-tips
| |
| | |
| === LoRaWAN Gateway ===
| |
| As discussed in the last plenum, we're building a LoRaWAN gateway. Never heard of LoRaWAN? Check this out: https://de.wikipedia.org/wiki/Long_Range_Wide_Area_Network. Anyway, here's our first shot: http://log.munichmakerlab.de/post/152211858820/setting-up-our-first-lorawan-gateway-well. It seems to work, but we didn't build any client devices for further testing yet. So that's the plan for next week...
| |
| | |
| === All the social medias! ===
| |
| We have an instagram account now. Because: why not! -> https://www.instagram.com/munichmakerlab/
| |
| | |
| === More documentation in the wiki \o/ ===
| |
| Turns out there's quite a bit of stuff going on in the wiki recently. At least a lot more than before -> Woop woop. Go check that out over here: https://wiki.munichmakerlab.de/wiki/Special:RecentChanges, and if you don't have an account yet, go to this place: https://wiki.munichmakerlab.de/wiki/Special:RequestAccount
| |
| | |
| == CW 41 ==
| |
| === New firmware for the doorlock ===
| |
| Our doorlock was suffering from some issues when entering the PIN. We put a firmware fix in; please let us know whether it works better now (or not at all).
| |
| | |
| === Door sensor for the Nebenraum ===
| |
| There had been some discussions about how to make sure the door to the Nebenraum doesn't stay unlocked. Heiko and Severin went ahead putting a first approach into place: A sensor on the door, which is connected to our MQTT bus, and a light next to the door in the main space to show whether the Nebenraum is locked properly or not. What do you think?
| |
| | |
| === Flowdock/IRC-Alarm ===
| |
| The alarm light found a new and a little bit more stable place, and is, against all rumors, working properly. Can you find it?
| |
| | |
| === New Make Magazin ===
| |
| A new edition of the German version of Make Magazine made it to the space. You can find it in our little library corner.
| |
| | |
| === "Zeug vom Tisch" Box ===
| |
| We rotated the "Zeug vom Tisch" box on Thursday. These things are now in the "Last Chance" box, grab them if they are yours: http://pasteboard.co/fLJKASELR.png
| |
| | |
| == CW 40 ==
| |
| === Cleanup session ===
| |
| We cleaned the space Sundays and changed the way how and where the laser material is stored. Most of the "member-owned" material moved downstairs, the rest is on the left side of the cutter. The "Free to use" materials are right beside the box storage shelfs.
| |
|
| |
|
| | == CW 03 == |
| === Plenum === | | === Plenum === |
| We had our Plenum with lots of participats! You can find all the stuff we discussed on the wiki (as always): https://wiki.munichmakerlab.de/wiki/20161009_Plenum
| | Very very efficent plenum this week. Find the meeting minutes right here: https://wiki.munichmakerlab.de/wiki/20170119_Plenum. Important takeaways in the following sections. |
| | |
| === Lasercutter usage fee ===
| |
| We have an new usage fee rate for the lasercutter:
| |
| | |
| * 2€/10min for Members
| |
| * 3€/10min for Hammer and Shield
| |
| * 4€/10min for Externals
| |
| * 5€/10min for Commercial Projects
| |
| | |
| === Tshirts! ===
| |
| The Shirts arrived, please contact Peter for yours. =) The ones with Name cost 17€, the rest 13€.
| |
| | |
| === Stickorrs! ===
| |
| After our great shirts we want to print new Stickers! Ideas anyone? =D
| |
| | |
| === "Zeug vom Tisch" Box ===
| |
| We rotated the "Zeug vom Tisch" box on Thursday. These things are now in the "Last Chance" box, grab them if they are yours: http://pasteboard.co/1ijfkK7PO.png
| |
| | |
| == CW 39 ==
| |
| === Plenum & Cleanup coming up ===
| |
| October 9th, so in little more than a week, we will meet again for our next Plenum and cleanup session.
| |
| As always, if you have something you want to discuss, complain, cheer on or if you want the space to buy something, add it to the wiki:
| |
| https://wiki.munichmakerlab.de/wiki/Plenum | |
| | |
| === T-shirts final call ===
| |
| We will order sunday evening. It's now or never.
| |
| https://pad.riseup.net/p/Mumashirts
| |
| Payment is due when you get the t-shirt btw.
| |
| | |
| === We joined the IoV movement #bullshit ===
| |
| We are now part of the growing IoV community with our Internet connected vacuum.
| |
| If you have a great Idea what should happen if you switch on the vacuum (besides spreading cleanliness), write in Main with #IoV
| |
|
| |
|
| == CW 38 == | | === Member Stuff and Space Shutdown === |
| === T-shirts again again!!1! ===
| | Beginning of February (or in the last days of January), we'll take out the two work tables in the middle of the space, and replace them with Europallets to start packing together stuff. Please put your member boxes (up to three) on there. They have to be closed with a lid, taped shut, and properly labeled. Everything that's not on there until Feb 12th is fair game for give-away for donations, which will be for building the new space. |
| New Designs! Thanks Jorgen! =D
| |
| https://pad.riseup.net/p/Mumashirts
| |
| We will order next week, so put your name in NOW!
| |
| | |
| === Network Stuff ===
| |
| We got a new (external) MQTT broker. Big thanks to Matthias for setting that up, as well as doing so much other awesome stuff to our IT setup, such as decent monitoring, and mocing the wiki. He's also planning to setup another, internal broker, and a few more things. So buy him a beer next time you see him ;)
| |
|
| |
|
| === Lost & Found === | | === Lost & Found === |
| This week's bin rotating somehow didn't happen, so one more chance to claim your stuff before it hits some black hole: http://pasteboard.co/oq8X8D0v.png
| | If you have lost something at the space, and it hasn't shown up until now, please consider putting it up on this wiki page: https://wiki.munichmakerlab.de/wiki/Lost%26Found. Chances are we'll find it during the space cleanup and teardown, so if it's on that list, we can return it to you, instead of giving it away. |
|
| |
|
| == CW 37 == | | === ToDo lists === |
| === Streetlife ===
| | We'll try to organize space todos in Trello now: https://trello.com/mumalab. If you want write access, please contant Matthias or Severin. |
| So much awesome! Streetlife Festival was great fun. If you haven't seen them yet, check out our pictures of day one (http://log.munichmakerlab.de/day/2016/09/10). Let's do it again next year.
| |
|
| |
|
| === Hackathon === | | === Laser Materials === |
| While part of the crew was out at Streetlife Festival, other went to Techfest in Garching, to win some prices. Congratulations to the ambitious and successful hackathon folks!
| | We got some new stock of MDF for the laser cutter. Sadly the prices increased a bit as we got these from the Hardware Store, not on bulk sale. |
| | New Prices are: |
| | ** MDF 3mm: 5€ |
| | ** MDF 5mm: 6€ |
|
| |
|
| === T-shirts again! ===
| | == CW 02 == |
| We were missing a order link last time... please put your name in if you like one: https://pad.riseup.net/p/Mumashirts
| | === Plenum === |
| Has anybody other ideas for designs?
| | We had a plenum this Thursday again. Here are the meeting minutes: https://wiki.munichmakerlab.de/wiki/20170112_Plenum. Make sure to check out the presentation on what the new space could look like. |
| | |
| === Lost & Found ===
| |
| There are some big things in the "Letzte Chance" Kiste, make sure to claim them if they are yours: http://pasteboard.co/oq8X8D0v.png
| |
| | |
| == CW 36 == | |
| === Streetlife === | |
| This is coming directly from the Streetlife Festival! =D
| |
| Everything is running smoothly and it's great fun to be here! Come tomorrow if you like, we'll be here till 2200.
| |
| http://log.munichmakerlab.de/day/2016/09/10
| |
| | |
| === Multifactory Workshops ===
| |
| We ended the last week with two great video workshops, one at HEi and one in our space. Great fun, now it's off to make some videos. For starters, Lorenza and Giulio did two walkthrough videos of the space, check them out at https://www.youtube.com/watch?v=XET8952wOg8 and https://www.youtube.com/watch?v=IhYeS7Y-0LE.
| |
| We still have to work on the eWindow, it's not quite working yet. Maybe a geekend some time in October to get it fully functional? | |
| | |
| === T-shirts ===
| |
| Moar T-shirts! Who is interested in ordering new MuMaLab Shirts?
| |
| Last time we got them from shirtinator.eu, for around 25€ apice (with two prints, on high quality shirts)
| |
| | |
| === Marketing stuff ===
| |
| We need more stuff with our logo and fancy texts and pictures! Business Cards are almost in the making, some flyers would be awesome. Anyone willing to throw in their awazing design skills? Let us know. We should also do another stickers run, supplies are getting low. Any new designs?
| |
| | |
| == CW 35 ==
| |
| | |
| === Multifactory ===
| |
| Last day of the eWindow workshop today. There's some software and electronics magic going on at the space later, and some more actual building of the windows at Werkbox3. Tomorrow, there's a video workshop at HEi, which starts at 11am. Feel free to join anytime. The second part of the workshop will be at our space again, on Sunday. I've heard there might be some BBQ going on in the afternoon on Sunday. More on everything as usual on https://multifactory.hackpad.com/Multifactory-Project-Munich-F5xvmQpW6Wy, and if want to take a look at the software magic, check out https://github.com/munichmakerlab/ewindow
| |
| | |
| === Streetlife ===
| |
| Only one more week until the Streetlife festival. Who's coming? What should we bring and show off? Let's do some planning in the wiki: https://wiki.munichmakerlab.de/wiki/Streetlife_Festival and on flowdock: https://www.flowdock.com/app/mumalab/streetlife-festival
| |
| | |
| === Lasercutter ===
| |
| The lasercutter seems to be having some hicups lately. Looks like it's time to do another maintenance day. If you want to help and learn more awesome laser skills, check out the #lasercutter flow on Flowdock: https://www.flowdock.com/app/mumalab/lasercutter. In the meantime, please be gentle with it (well, you should always be gentle with it, actually).
| |
|
| |
|
| === Make Munich 2017 === | | === Make Munich 2017 === |
| Martin let's us know that the next MAKE MUNICH will take place on May 6th+7th 2017. Please help us and join the organizing team: send us an email to info@make-munich.de. A kickoff meeting will be announced soon.
| | This year's Make Munich is coming up. Let's show some awesome stuff, and hopefully do some more awesome things as well. Participate in the planning on flowdock (https://www.flowdock.com/app/mumalab/make-munich-2017) or in the wiki (https://wiki.munichmakerlab.de/wiki/Make_Munich_2017) |
| | |
| === This Newsletter ===
| |
| Do you like it? Any ideas for imporving it? If you want something added, just drop a line with #newsletter in the flowdock main channel, and we'll try to put it in here. We're also keeping an archive at https://wiki.munichmakerlab.de/wiki/Newsletter
| |
| | |
| | |
| == CW 34 ==
| |
| | |
| === Multifactory ===
| |
| We did some more tests for the eWindow. Parts are in the mail now, so let's meet up on Monday, 6pm, at HEi for the kick off.
| |
| https://multifactory.hackpad.com/Multifactory-Project-Munich-F5xvmQpW6Wy | |
| Also, if you know some JS and would like to build some software for the ewindow, hit me up.
| |
| | |
| === Hydroponics ===
| |
| Peter is reinventing the wheel, with plants in it. Oh, and the watercress. It's spreading /o\
| |
| | |
| === Money for drinks ===
| |
| We got a new cash box thingie for drinks money. Please put bills in the "big" safe box, and cash in the small one.
| |
|
| |
|
| === Streetlife === | | === 3D printers === |
| Streetlife is coming up fast, so Heiko is making some plans on how to do our booth. If you got any good ideas, share them with him.
| | 3D printers were being fixed this week. The Neo and the X350 are back in operations, and Karim's Ultimaker was seriously being worked on Thursday. Awesome! |
|
| |
|
| | === SHA2017 === |
| | ~10 members are already signed on to go on the SHA2017, a hacker camp/festival/conference in August this year. If you want to stay in the loop, join #sha2017 in flowdock! |
| | You can get a ticket here: https://sha2017.org/ |
|
| |
|
| == CW 33 == | | == CW 01 == |
| | |
| === Multifactory Project Update ===
| |
| Small update, we managed to get a video link based on WebRTC going in preparation of the Multifactory workshop.
| |
| https://multifactory.hackpad.com/Multifactory-Project-Munich-F5xvmQpW6Wy.
| |
| Remember, we'll kick it off on Monday, August29th, 6pm, at the HEi. Join us!
| |
| | |
| === Cleanup ===
| |
| Some major cleaning was going on before the plenum last Sunday. We cleaned out the free-to-hack shelves, which are super tidy right now (let's try to keep them that way).
| |
| Thanks to everyone who participated!
| |
| | |
| === Plenum === | | === Plenum === |
| The plenum was productive and fun as always.
| | We had a Plenum on Thursday (as every Thursday for the next few weeks now). Here are the meeting minutes: https://wiki.munichmakerlab.de/wiki/20170105_Plenum |
| You can find the notes here:
| |
| https://wiki.munichmakerlab.de/wiki/20160814_Plenum | |
| | |
| === Money for drinks ===
| |
| To something not so fun: it seems as someone is not only not paying for drinks, but activly stealing from the cash box.
| |
| We will introducte a second, locked register for paper money.
| |
| And please watch our for unknown persons throwing greedy looks to the box.
| |
|
| |
|
| === What grows there? === | | === Personal stuff at the space === |
| Not mold but watercress! Have a look at:
| | One important point from the Plenum: We'll have space to move the amount of 3 of our standard IKEA boxes to the new space, and will also use that as the amount everyone should be able to store at the new space, until we have found a new storage solution. If you have more, please make sure to clean that out, take it home, or throw it away within the next few weeks |
| * http://log.munichmakerlab.de/day/2016/08/14
| |
| * http://log.munichmakerlab.de/day/2016/08/19
| |
| == CW 32 ==
| |
| === Newsletter ===
| |
| We heard you like news. So here's the newest news, wrapped in a newsletter: We now have a newsletter! | |
| We thought about how it inform everybody about what's happening and went back to this.
| |
| Because. it. works!
| |
| ... expect one every week until we think differently about that (or we forget about it).
| |
| If you have something that should go in the Newsletter: Post it into 'Main' in Flowdock and attach the #newsletter hashtag. | |
|
| |
| === Street Life Festival ===
| |
| We have our own booth at the next Street Life Festival!
| |
| A small one, about as wide as Severin's Fire truck. Which will be on there to provide power and Mate.
| |
| It's on the weekend from the 10 - 11 September.
| |
| Find more info here: http://www.streetlife-festival.de/
| |
| ... BeeDooBeeDooo
| |
|
| |
|
| === Multifactory Project === | | === LED projector conversion === |
| You know what's cool? One makerspace. You know what's even cooler? More makerspaces!
| | Our projector lamp broke a few weeks back. Heiko, Nicolai, Peter and Rene took on the task of converting that to one bright LED. Check it out right here: http://log.munichmakerlab.de/post/155592638795/the-lamp-of-our-trash-found-beamer-finally-gave |
| That's what the Offene Werkstätten folks thought, so they started an initative to get the spaces in Munich to collaborate. Together with FabLab, HEi and Werkbox3, we will take part in the first Multifactory Project workshop week, from August 29th til September 9th.
| | The LED (25w AC cob) turned out to be not bright enough. If you have something bigger sitting in a box and want to help the efforts, contact them. |
| There'll be two parts, a 2 day video workshop where we'll create some videos about our spaces, and a 2+ days workshop to build eWindows (video connections between the spaces). You can find more informaation at http://www.offene-werkstaetten.org/seite/multifactory-netzwerk and the full schedule at https://multifactory.hackpad.com/Multifactory-Project-Munich-F5xvmQpW6Wy.
| |
| We'll kick it off on Monday, August29th, 6pm, at the HEi. Join us!
| |
|
| |
|
| === Plenum & cleanup === | | === Broken 3D printers === |
| The next Plenum and cleanup session is on the 14. August. We will start at 1400 to clean, and will start the Plenum right after. | | The Neo and X350 are out of order, until further notice. Please don't try to fix them yourself (that broke them in the first place), and get in contact with ThomasE and Joerg if you want to help. |
| Part of the cleanup is looking at the stuff in free-to-use and sort the trash out.
| |
| If you have some stuff for the Plenum, go right here: https://wiki.munichmakerlab.de/wiki/Plenum
| |
|
| |
|
| === PS === | | === CNC Furniture === |
| Use #stream in Flowdock to update our 'Stream of consciousness' Twitter account: stream_of_muma
| | Peter and Severin have been working on some open source furniture things. Peter built a full-size chair: https://www.instagram.com/p/BO9ZBylBiTh/ and Severin some models for tables and stools. Check those out at the space |
In order to show what's going on at and around the space, we've decided to create a weekly newsletter.
We started archiving them here, more recent newsletters can be found in the Mailinglist Archives.
Previous years:
Please contribute to the newsletter, by posting to #newsletter in our Slack, or by adding content directly, as described in our HowTo.
CW 04
Plenum
Our shortest Plenum ever, with only 20 minutes runtime!
You can find the protocol here: https://wiki.munichmakerlab.de/wiki/20170126_Plenum
Member Stuff and Space Shutdown reminder
we already took one of the work tables in the middle of the space out and set up pallets for you to start packing your stuff on. Again, please put your member boxes (up to three) on there. They have to be closed with a lid, taped shut, and properly labeled. Everything that's not on there until Feb 12th is fair game for give-away for donations, which will be for building the new space.
CW 03
Plenum
Very very efficent plenum this week. Find the meeting minutes right here: https://wiki.munichmakerlab.de/wiki/20170119_Plenum. Important takeaways in the following sections.
Member Stuff and Space Shutdown
Beginning of February (or in the last days of January), we'll take out the two work tables in the middle of the space, and replace them with Europallets to start packing together stuff. Please put your member boxes (up to three) on there. They have to be closed with a lid, taped shut, and properly labeled. Everything that's not on there until Feb 12th is fair game for give-away for donations, which will be for building the new space.
Lost & Found
If you have lost something at the space, and it hasn't shown up until now, please consider putting it up on this wiki page: https://wiki.munichmakerlab.de/wiki/Lost%26Found. Chances are we'll find it during the space cleanup and teardown, so if it's on that list, we can return it to you, instead of giving it away.
ToDo lists
We'll try to organize space todos in Trello now: https://trello.com/mumalab. If you want write access, please contant Matthias or Severin.
Laser Materials
We got some new stock of MDF for the laser cutter. Sadly the prices increased a bit as we got these from the Hardware Store, not on bulk sale.
New Prices are:
CW 02
Plenum
We had a plenum this Thursday again. Here are the meeting minutes: https://wiki.munichmakerlab.de/wiki/20170112_Plenum. Make sure to check out the presentation on what the new space could look like.
Make Munich 2017
This year's Make Munich is coming up. Let's show some awesome stuff, and hopefully do some more awesome things as well. Participate in the planning on flowdock (https://www.flowdock.com/app/mumalab/make-munich-2017) or in the wiki (https://wiki.munichmakerlab.de/wiki/Make_Munich_2017)
3D printers
3D printers were being fixed this week. The Neo and the X350 are back in operations, and Karim's Ultimaker was seriously being worked on Thursday. Awesome!
SHA2017
~10 members are already signed on to go on the SHA2017, a hacker camp/festival/conference in August this year. If you want to stay in the loop, join #sha2017 in flowdock!
You can get a ticket here: https://sha2017.org/
CW 01
Plenum
We had a Plenum on Thursday (as every Thursday for the next few weeks now). Here are the meeting minutes: https://wiki.munichmakerlab.de/wiki/20170105_Plenum
Personal stuff at the space
One important point from the Plenum: We'll have space to move the amount of 3 of our standard IKEA boxes to the new space, and will also use that as the amount everyone should be able to store at the new space, until we have found a new storage solution. If you have more, please make sure to clean that out, take it home, or throw it away within the next few weeks
LED projector conversion
Our projector lamp broke a few weeks back. Heiko, Nicolai, Peter and Rene took on the task of converting that to one bright LED. Check it out right here: http://log.munichmakerlab.de/post/155592638795/the-lamp-of-our-trash-found-beamer-finally-gave
The LED (25w AC cob) turned out to be not bright enough. If you have something bigger sitting in a box and want to help the efforts, contact them.
Broken 3D printers
The Neo and X350 are out of order, until further notice. Please don't try to fix them yourself (that broke them in the first place), and get in contact with ThomasE and Joerg if you want to help.
CNC Furniture
Peter and Severin have been working on some open source furniture things. Peter built a full-size chair: https://www.instagram.com/p/BO9ZBylBiTh/ and Severin some models for tables and stools. Check those out at the space
