Doorlock: Difference between revisions
(→Alternative e-lock systems: add new links) |
(facts, no more brain storming.) |
||
| Line 1: | Line 1: | ||
Our new space will need an electric door lock. | Our new space will need an electric door lock. | ||
= | == Theory == | ||
We needed a lock that allows us to hand out as many "keys" as we like, but without making it super complicated to use. A lot of hackerspaces used SSH keys as "keys" to their space. For us, that's not user friendly enough, as we expect quite a few non-technical folks to have access to the space | |||
After discussions, we settled for a two-factor system, using RFID cards and PINs. Additional means to authenticate may be introduced at another point in time. | |||
= Resources = | == Hardware == | ||
=== Frontend === | |||
RFID reader, pinpad, and LCD display, connected to an Arduino. | |||
Prototype uses an Arduino Uno, which is a little short on pins. A buzzer would be nice, and we currently can't control the backlight of the LCD. | |||
=== Locking Mechanism === | |||
We got a motor lock on eBay, together with its electronics, and we'll use that. It's a Dorma SVP 2000 series lock. | |||
The electronics have a set of contacts that can be used to get the status of the lock, as well as to lock and unlock it. | |||
=== Backend === | |||
A Raspberry Pi, which is connected to the frontend over a serial connection, and has the motor lock electronics connected via its GPIOs. Currently, only the locking pins are connected via a grove relay. No status checks are being done yet. | |||
=== Schema === | |||
<code> | |||
+-----------+ | |||
| RFID | | |||
+-(SPI)--+ Reader | | |||
| +-----------+ | |||
+--------------+ +---------------+ | | |||
| | | | | +-----------+ | |||
| RaspberryPi +----(UART)----+ Arduino +--+-(Matrix)-+ Keypad | | |||
| | | (frontend) | | +-----------+ | |||
+------+-------+ +---------------+ | | |||
| | +-----------+ | |||
(Relais board) +--+ Display | | |||
| +-----------+ | |||
+-----+------+ | |||
| Door lock | | |||
+------------+ | |||
</code> | |||
== Software == | |||
Hosted on Github: https://github.com/munichmakerlab/doorlock, contains both the frontend firmware as well as the software for the backend. | |||
The backend runs on the RPi, and uses a SQLite database to store RFID and PIN information. The "manage_db.py" script can be used to maintain that database. | |||
== Resources == | |||
* [https://www.youtube.com/watch?v=y6jDO9zb8gI Talk about doorlock at muCCC] | * [https://www.youtube.com/watch?v=y6jDO9zb8gI Talk about doorlock at muCCC] | ||
* [https://www.youtube.com/watch?v=6tNslSYthFk Video of first prototype] | |||
[[Category:Project]][[Category:Infrastructure]][[Category:New Space]] | [[Category:Project]][[Category:Infrastructure]][[Category:New Space]] | ||
Revision as of 01:00, 2 January 2015
Our new space will need an electric door lock.
Theory
We needed a lock that allows us to hand out as many "keys" as we like, but without making it super complicated to use. A lot of hackerspaces used SSH keys as "keys" to their space. For us, that's not user friendly enough, as we expect quite a few non-technical folks to have access to the space
After discussions, we settled for a two-factor system, using RFID cards and PINs. Additional means to authenticate may be introduced at another point in time.
Hardware
Frontend
RFID reader, pinpad, and LCD display, connected to an Arduino.
Prototype uses an Arduino Uno, which is a little short on pins. A buzzer would be nice, and we currently can't control the backlight of the LCD.
Locking Mechanism
We got a motor lock on eBay, together with its electronics, and we'll use that. It's a Dorma SVP 2000 series lock.
The electronics have a set of contacts that can be used to get the status of the lock, as well as to lock and unlock it.
Backend
A Raspberry Pi, which is connected to the frontend over a serial connection, and has the motor lock electronics connected via its GPIOs. Currently, only the locking pins are connected via a grove relay. No status checks are being done yet.
Schema
+-----------+
| RFID |
+-(SPI)--+ Reader |
| +-----------+
+--------------+ +---------------+ |
| | | | | +-----------+
| RaspberryPi +----(UART)----+ Arduino +--+-(Matrix)-+ Keypad |
| | | (frontend) | | +-----------+
+------+-------+ +---------------+ |
| | +-----------+
(Relais board) +--+ Display |
| +-----------+
+-----+------+
| Door lock |
+------------+
Software
Hosted on Github: https://github.com/munichmakerlab/doorlock, contains both the frontend firmware as well as the software for the backend.
The backend runs on the RPi, and uses a SQLite database to store RFID and PIN information. The "manage_db.py" script can be used to maintain that database.
