Network: Difference between revisions

From The Munich Maker Lab's Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
(46 intermediate revisions by 10 users not shown)
Line 1: Line 1:
== WiFi ==
== WiFi ==
* SSID: "munichmakerlab" or "munichmakerlab-5g"
<!-- Keep this section at the top as this is what most people are looking for! -->
* Security: WPA2 Personal. Preshared Key is written on the whiteboard.
* SSID: "munichmakerlab" (supports 2.4 GHz and 5 GHz)
* Mode: 802.11gn. No 802.11b. If you really really need to connect a 11Mbit/s only device, please talk to [[User:Tiefpunkt|tiefpunkt]]
* Security: WPA2 Personal. Preshared Key is on a sticker located on the mailbox at the workshop door.
=== Hardware ===
2 LANCOM L-320agn Wireless Access Points [http://www.lancom-systems.de/produkte/wireless-lan/indoor-wlan-access-points/lancom-l-320agn-wireless/lancom-l-320agn-wireless/], both manually configured (no WiFi controller)
* mumawireless01
** SSID "munichmakerlab"
** 2.4 Ghz
** Channel 1
* mumawireless02
** SSID "munichmakerlab" and "munichmakerlab-5g"
** 5Ghz
** Channel 108


== Network Segment ==
== Network Segments ==
* Subnetmask: 255.255.0.0
{| class="wikitable" width="100%"
* Gateway: 10.10.0.1
! Network !! Subnetmask !! Gateway !! DNS servers !! DHCP server !! VLAN !! Comment
* DNS-Server: 10.10.0.10
|-
* DHCP-Server: 10.10.0.1
| SpaceNET || 255.255.0.0 (/16) || 10.10.0.1 || 10.10.0.10, 10.10.0.1 || 10.10.0.1 || 50 || If you don't know what this is, this is the network you are using.
|-
| Mgmt LAN || 255.255.255.0 (/24) || 10.11.1.1 || 10.11.1.1 || 10.11.1.1 || none || (administrative purposes)
|-
| SpaceVPN || 255.255.255.0 (/24) || 10.11.2.1 || 10.11.2.1 || 10.11.2.1 || none || Restricted access to SpaceNET and Mgmt VLAN
|-
| PPPoE VLAN || - || - || - || - || 3 || (administrative purposes)
|-
| Reserved VLAN || - || - || - || - || 2019 || Do not use
|-
| Reserved VLAN || - || - || - || - || 2020 || Do not use
|-  
| Reserved VLAN WB³ || 255.255.254.0 (/23) || 10.11.12.1 || 10.11.12.1 || 10.11.12.1 || 2012|| Do not use
|-
|}


=== IP Address Space ===
=== SpaceNET: IP Address Space ===
* Space-Stuff (space owned or used stuff): 10.10.20.0 - 10.10.20.100
* Space-Stuff (space owned or used stuff): 10.10.20.0 - 10.10.20.100
* User-Stuff static IP: 10.10.20.101 - 10.10.20.254
* User-Stuff static IP: 10.10.20.101 - 10.10.20.254
* User-DHCP: 10.10.10.20 - 10.10.10.250
* User-DHCP: 10.10.10.20 - 10.10.11.250 (lease time 1 week)
 
=== SpaceNET: Getting a fixed IP address ===
If you need a fixed IP address, choose one that's not taken in the appropriate range and enter it in the table below. Usually there are groups of IPs (3D printers, ...) so try to fit your device in one of the groups.


=== Allocated IP Addresses ===
=== SpaceNET: Allocated IP Addresses ===
{| class="wikitable" width="100%"
{| class="wikitable" width="100%"
! IP Address !! Name !! Description  
! IP Address !! Name !! Description  
Line 33: Line 40:
| 10.10.0.10 || ns1 || DNS server (running on the docker01 host)
| 10.10.0.10 || ns1 || DNS server (running on the docker01 host)
|-
|-
| 10.10.10.20-250 || || DHCP Range
| 10.10.10.20-10.10.11.250 || <b>DO NOT USE</b> || DHCP Range
|-
|[http://10.10.10.51/ 10.10.10.51]
|Shelly wh-floodlight1
|[[Floodlights]] => might be outdated (in DHCP range)
|-
|-
| 10.10.20.10 || NyanPrint || [[Printers|Color Laser Printer]]
|[http://10.10.10.53/ 10.10.10.53]
|Shelly wh-floodlight2
|[[Floodlights]] => might be outdated (in DHCP range)
|-
| 10.10.20.10 || NyanPrint || [[Printers|Color Laser Printer / Drucker Kyocera FS-C8020MFP]]
|-
|-
| 10.10.20.24 || OctoPrint NEO 1 || [[Neo1]]  [http://neo1.local/ http://neo1.local/]
| 10.10.20.24 || OctoPrint NEO 1 || [[Neo1]]  [http://neo1.local/ http://neo1.local/]
Line 42: Line 57:
|-  
|-  
| 10.10.20.26 || OctoPrint Zonestar Z5 || [[Zonestar Z5]]
| 10.10.20.26 || OctoPrint Zonestar Z5 || [[Zonestar Z5]]
|-
| 10.10.20.27 (duplicate) || vertexdelta || OctoPrint Vertex Delta
|-
| 10.10.20.28 || Ultimaker || Ultimaker "Ulrich" Unlimited Z
|-
| 10.10.20.27 (duplicate) || OctoPrint X350 || [[X350]]  [http://x350.local/ http://x350.local/]
|-
| 10.10.20.29 || Koukaam Netio-230A || Spannungsverteilungsgerät
|-
| 10.10.20.30 || Led panel || [[LED_Panel|LED Panel]]
|-
|-
| 10.10.20.40 || heimdal || [[Doorlock|Door Lock RPi]]
| 10.10.20.40 || heimdal || [[Doorlock|Door Lock RPi]]
|-
|-
| 10.10.20.50 || PiPunkt || [[SpaceMusic|Space Status RPi]]
| 10.10.20.42 || strichliste || strichliste backend on Chris' [[ProxMoxBox]]
|-
|-
| 10.10.21.61 || hawking || [[Fileserver]] (deactivated)
| 10.10.20.43 || zuko-ng ||
|-
| 10.10.20.44 || zuko ||
|-
| 10.10.20.45 || rusa || Prusa Mini 1 [[Prusa Mini]]
|-
| 10.10.20.46 || lusa || Prusa Mini 2 [[Prusa Mini]]
|-
|[https://10.10.20.66:8006/ 10.10.20.66]
|vulpix
|Proxmox Local Server
|-
|[http://10.10.20.67:8123 10.10.20.67]
|zapdos
|Homeassistant installation
|-
| 10.10.20.80 || Lasercutter || [[LaserCutter]]
|-
| 10.10.20.81 || LaserPC || [[LaserCutter]]
|-
|-
| 10.10.20.66 || docker01 || [[Docker]] Host
| 10.10.20.85 || LaserCutPC OLD (temp) || [[LaserCutter]]
|-
|-
| 10.10.20.81 || LaserCutPC || [[LaserCutter]]
| 10.10.20.82 || cutmysignintopieces || [[Plotter]]  
|-
|-
| 10.10.20.90 || MuMaShare || [[MuMaShare]]
| 10.10.20.90 || MuMaShare || [[MuMaShare]]
|-
| 10.10.20.123 || Paul's storage box raspi || [[User:Paul|Paul]]
|-
|-
| 10.10.20.144 || Wasserschaden || [[User:Paul|Paul]] (bridge to the mesh)
| 10.10.20.144 || Wasserschaden || [[User:Paul|Paul]] (bridge to the mesh)
|-
|-
| 10.10.20.155 || germanpi || A very German Pi
| 10.10.20.200-210 || MuMaMox || Chris' [[ProxMoxBox]]
|-
|-
|}
|}


==== Dead Hosts ====
=== SpaceNET: Dead Hosts ===
{| class="wikitable" width="100%"
{| class="wikitable" width="100%"
! IP Address !! Name !! Description  
! IP Address !! Name !! Description  
|-
|-
| 10.10.20.2 || FritzBox || VoIP Gateway (FritzBox 5050)
| 10.10.20.11 || NyanerPrint || HP Color LaserJet cm2320fxi MFP
|-
| 10.10.20.25 || Alter OctoPrint Server || [[PrinterBot|OctoPrint]]
|-
| 10.10.20.26 || OctoPrint NEO 2|| [[Neo2]] [http://neo2.local/ http://neo2.local/]
|-
| 10.10.20.27 || OctoPrint X350 || [[X350]]  [http://x350.local/ http://x350.local/]
|-
|-
| 10.10.20.28 || OctoPrint X400 || [[X400]] [http://x400.local/ http://x400.local/]
| 10.10.20.28 || OctoPrint X400 || [[X400]] [http://x400.local/ http://x400.local/]
Line 79: Line 118:
| 10.10.20.32 || tokyo.local || [[LEDPanel|LED-Panel wlan0]]
| 10.10.20.32 || tokyo.local || [[LEDPanel|LED-Panel wlan0]]
|-
|-
| 10.10.20.35 || - || [[Behringer x32| x32 Mixer]]
| 10.10.21.61 || hawking || [[Fileserver]] (deactivated)
|-
|-
| 10.10.20.61 || buffalo || [[Fileserver]] (hawking's old IP address)
| 10.10.20.150 || ewindow || [[Virtual Machines]]
|-
|-
|10.10.20.66
|docker01
|[[Docker]] Host
|-
|-
| 10.10.20.82 || Terminal Server || ...
|10.10.20.67
|-
|docker01-old
| 10.10.20.91 || backup || [[Backup]] operator
|Old [[Docker]] Host while stuff is being migrated over
|-
| 10.10.20.99 || StyroporPI || [[Foam_cutter]] raspi controlling the foam cutter
|-
| 10.10.20.110 || [[Startt]] || an octoprint server
|-
| 10.10.20.150 || ewindow || [[Virtual Machines]]
|-
|-
|10.10.20.155
|germanpi
|A very German Pi
|}
|}
==== Getting a fixed IP address ====
If you need a fixed IP address, choose one that's not taken yet, and enter it in the table above. Done. There's currently no dedicated DNS, we'll tackle that eventually.


=== IPv6 ===
== IPv6 ==
<del>We got native IPv6 \o/</del> IPv6 is broken, unfortunately. There is IPv6 on the Freifunk WiFi, if you really need it.
We got native IPv6 \o/


== DNS ==
== DNS ==
Line 105: Line 142:


* Internal zone is "intern.munichmakerlab.de", not all hosts are in there yet
* Internal zone is "intern.munichmakerlab.de", not all hosts are in there yet
* Server is maintained via Webmin, check http://www.damagehead.com/blog/2015/04/28/deploying-a-dns-server-using-docker/ for details
* Server is maintained via Webmin at https://10.10.20.66:10000/
* Server is not configured in DHCP yet, requires some testing first
 
== Hostnames ==
Should make sense.


=== Hostnames ===
== Hardware ==
When setting up a new machine for the space, the machine should be named after a famous scientist or mathematician whose birthday is today or near today. Use the following list to avoid already used hostnames:
Currently rolling a Ubiquiti setup with USG, CloudKey, 24-Port US-24 Switch, UAC PRO access point and a AP-PRO access point for the "Feuerwehr" access (toilets).
==== Used hostnames ====
Infrastructure is centrally managed up to the access switch (ground level switches) which all terminate the MuMaLab Network unless stated otherwise.
{| class="wikitable" width="100%"
! Hostname !! Device Type !! Location
|-
| Doppler || PC || Workplace 2
|-
| Darwin || PC || Workplace 1
|-
| Heisenberg || PC || Spacemonitor near the entrance
|}


== Uplink ==
=== Uplink ===
We are connected to the internet via a Telekom V-DSL connection.
We are connected to the internet via a Telekom V-DSL connection. Speed is [https://www.speedtest.net/result/8813392085 usually 100 mbit down, 40 up.]


== VPN ==
== VPN ==
You can connect to the lab remotely, via OpenVPN. If you need access, contact [[User:JanS|JanS]].
VPN is provided for administrative purposes, contact [[User:Tiefpunkt|Severin]] or [[User:c22|German]] for more information.


[[Category:Infrastructure]]
[[Category:Infrastructure]]

Revision as of 00:31, 19 November 2024

WiFi

  • SSID: "munichmakerlab" (supports 2.4 GHz and 5 GHz)
  • Security: WPA2 Personal. Preshared Key is on a sticker located on the mailbox at the workshop door.

Network Segments

Network Subnetmask Gateway DNS servers DHCP server VLAN Comment
SpaceNET 255.255.0.0 (/16) 10.10.0.1 10.10.0.10, 10.10.0.1 10.10.0.1 50 If you don't know what this is, this is the network you are using.
Mgmt LAN 255.255.255.0 (/24) 10.11.1.1 10.11.1.1 10.11.1.1 none (administrative purposes)
SpaceVPN 255.255.255.0 (/24) 10.11.2.1 10.11.2.1 10.11.2.1 none Restricted access to SpaceNET and Mgmt VLAN
PPPoE VLAN - - - - 3 (administrative purposes)
Reserved VLAN - - - - 2019 Do not use
Reserved VLAN - - - - 2020 Do not use
Reserved VLAN WB³ 255.255.254.0 (/23) 10.11.12.1 10.11.12.1 10.11.12.1 2012 Do not use

SpaceNET: IP Address Space

  • Space-Stuff (space owned or used stuff): 10.10.20.0 - 10.10.20.100
  • User-Stuff static IP: 10.10.20.101 - 10.10.20.254
  • User-DHCP: 10.10.10.20 - 10.10.11.250 (lease time 1 week)

SpaceNET: Getting a fixed IP address

If you need a fixed IP address, choose one that's not taken in the appropriate range and enter it in the table below. Usually there are groups of IPs (3D printers, ...) so try to fit your device in one of the groups.

SpaceNET: Allocated IP Addresses

IP Address Name Description
10.10.0.1 Router Router
10.10.0.10 ns1 DNS server (running on the docker01 host)
10.10.10.20-10.10.11.250 DO NOT USE DHCP Range
10.10.10.51 Shelly wh-floodlight1 Floodlights => might be outdated (in DHCP range)
10.10.10.53 Shelly wh-floodlight2 Floodlights => might be outdated (in DHCP range)
10.10.20.10 NyanPrint Color Laser Printer / Drucker Kyocera FS-C8020MFP
10.10.20.24 OctoPrint NEO 1 Neo1 http://neo1.local/
10.10.20.25 OctoPrint X400 x400
10.10.20.26 OctoPrint Zonestar Z5 Zonestar Z5
10.10.20.27 (duplicate) vertexdelta OctoPrint Vertex Delta
10.10.20.28 Ultimaker Ultimaker "Ulrich" Unlimited Z
10.10.20.27 (duplicate) OctoPrint X350 X350 http://x350.local/
10.10.20.29 Koukaam Netio-230A Spannungsverteilungsgerät
10.10.20.30 Led panel LED Panel
10.10.20.40 heimdal Door Lock RPi
10.10.20.42 strichliste strichliste backend on Chris' ProxMoxBox
10.10.20.43 zuko-ng
10.10.20.44 zuko
10.10.20.45 rusa Prusa Mini 1 Prusa Mini
10.10.20.46 lusa Prusa Mini 2 Prusa Mini
10.10.20.66 vulpix Proxmox Local Server
10.10.20.67 zapdos Homeassistant installation
10.10.20.80 Lasercutter LaserCutter
10.10.20.81 LaserPC LaserCutter
10.10.20.85 LaserCutPC OLD (temp) LaserCutter
10.10.20.82 cutmysignintopieces Plotter
10.10.20.90 MuMaShare MuMaShare
10.10.20.123 Paul's storage box raspi Paul
10.10.20.144 Wasserschaden Paul (bridge to the mesh)
10.10.20.200-210 MuMaMox Chris' ProxMoxBox

SpaceNET: Dead Hosts

IP Address Name Description
10.10.20.11 NyanerPrint HP Color LaserJet cm2320fxi MFP
10.10.20.28 OctoPrint X400 X400 http://x400.local/
10.10.20.31 tokyo.local LED-Panel eth0
10.10.20.32 tokyo.local LED-Panel wlan0
10.10.21.61 hawking Fileserver (deactivated)
10.10.20.150 ewindow Virtual Machines
10.10.20.66 docker01 Docker Host
10.10.20.67 docker01-old Old Docker Host while stuff is being migrated over
10.10.20.155 germanpi A very German Pi

IPv6

We got native IPv6 \o/

DNS

DNS is provided by a docker bind image (https://github.com/sameersbn/docker-bind).

  • Internal zone is "intern.munichmakerlab.de", not all hosts are in there yet
  • Server is maintained via Webmin at https://10.10.20.66:10000/

Hostnames

Should make sense.

Hardware

Currently rolling a Ubiquiti setup with USG, CloudKey, 24-Port US-24 Switch, UAC PRO access point and a AP-PRO access point for the "Feuerwehr" access (toilets). Infrastructure is centrally managed up to the access switch (ground level switches) which all terminate the MuMaLab Network unless stated otherwise.

Uplink

We are connected to the internet via a Telekom V-DSL connection. Speed is usually 100 mbit down, 40 up.

VPN

VPN is provided for administrative purposes, contact Severin or German for more information.

Retrieved from "https://wiki.munichmakerlab.de/index.php?title=Network&oldid=7608"