Network

WiFi

• SSID: "munichmakerlab" (supports 2.4 GHz and 5 GHz)
• Security: WPA2 Personal. Preshared Key is on a sticker located on the mailbox at the workshop door.

Network Segments

Network	Subnetmask	Gateway	DNS servers	DHCP server	VLAN	Comment
SpaceNET	255.255.0.0 (/16)	10.10.0.1	10.10.0.10, 10.10.0.1	10.10.0.1	50	If you don't know what this is, this is the network you are using.
Mgmt LAN	255.255.255.0 (/24)	10.11.1.1	10.11.1.1	10.11.1.1	none	(administrative purposes)
SpaceVPN	255.255.255.0 (/24)	10.11.2.1	10.11.2.1	10.11.2.1	none	Restricted access to SpaceNET and Mgmt VLAN
PPPoE VLAN	-	-	-	-	3	(administrative purposes)
Reserved VLAN	-	-	-	-	2019	Do not use
Reserved VLAN	-	-	-	-	2020	Do not use

SpaceNET: IP Address Space

• Space-Stuff (space owned or used stuff): 10.10.20.0 - 10.10.20.100
• User-Stuff static IP: 10.10.20.101 - 10.10.20.254
• User-DHCP: 10.10.10.20 - 10.10.11.250 (lease time 1 week)

SpaceNET: Getting a fixed IP address

If you need a fixed IP address, choose one that's not taken in the appropriate range and enter it in the table below. Usually there are groups of IPs (3D printers, ...) so try to fit your device in one of the groups.

SpaceNET: Allocated IP Addresses

IP Address	Name	Description
10.10.0.1	Router	Router
10.10.0.10	ns1	DNS server (running on the docker01 host)
10.10.10.20-10.10.11.250	DO NOT USE	DHCP Range
10.10.20.10	NyanPrint	Color Laser Printer / Drucker Kyocera FS-C8020MFP
10.10.20.24	OctoPrint NEO 1	Neo1 http://neo1.local/
10.10.20.25	OctoPrint X400	x400
10.10.20.26	OctoPrint Zonestar Z5	Zonestar Z5
10.10.20.27	vertexdelta	OctoPrint Vertex Delta
10.10.20.28	Ultimaker	Ultimaker "Ulrich" Unlimited Z
10.10.20.27	OctoPrint X350	X350 http://x350.local/
10.10.20.40	heimdal	Door Lock RPi
10.10.20.42	strichliste	strichliste backend on Chris' ProxMoxBox
10.10.20.44	zuko
10.10.20.45	rusa	Prusa Mini 1 Rusa
10.10.20.46	lusa	Prusa Mini 2 Lusa
10.10.20.66	docker01	Docker Host
10.10.20.67	docker01-old	Old Docker Host while stuff is being migrated over
10.10.20.80	Lasercutter	LaserCutter
10.10.20.81	LaserCutPC	LaserCutter
10.10.20.85	LaserCutPC OLD (temp)	LaserCutter
10.10.20.82	cutmysignintopieces	Plotter
10.10.20.90	MuMaShare	MuMaShare
10.10.20.123	Paul's storage box raspi	Paul
10.10.20.144	Wasserschaden	Paul (bridge to the mesh)
10.10.20.155	germanpi	A very German Pi
10.10.20.200-210	MuMaMox	Chris' ProxMoxBox

SpaceNET: Dead Hosts

IP Address	Name	Description
10.10.20.11	NyanerPrint	HP Color LaserJet cm2320fxi MFP
10.10.20.28	OctoPrint X400	X400 http://x400.local/
10.10.20.31	tokyo.local	LED-Panel eth0
10.10.20.32	tokyo.local	LED-Panel wlan0
10.10.21.61	hawking	Fileserver (deactivated)
10.10.20.150	ewindow	Virtual Machines

IPv6

We got native IPv6 \o/

DNS

DNS is provided by a docker bind image (https://github.com/sameersbn/docker-bind).

• Internal zone is "intern.munichmakerlab.de", not all hosts are in there yet
• Server is maintained via Webmin at https://10.10.20.66:10000/

Hostnames

Should make sense.

Hardware

Currently rolling a Ubiquiti setup with USG, CloudKey, 24-Port US-24 Switch, UAC PRO access point and a AP-PRO access point for the "Feuerwehr" access (toilets). Infrastructure is centrally managed up to the access switch (ground level switches) which all terminate the MuMaLab Network unless stated otherwise.

Uplink

We are connected to the internet via a Telekom V-DSL connection. Speed is usually 100 mbit down, 40 up.

VPN

VPN is provided for administrative purposes, contact Severin or German for more information.