https://wiki.munichmakerlab.de/api.php?action=feedcontributions&user=Ragnaroek23&feedformat=atomThe Munich Maker Lab's Wiki - User contributions [en]2024-03-28T21:30:12ZUser contributionsMediaWiki 1.39.5https://wiki.munichmakerlab.de/index.php?title=Archive:35C3&diff=3638Archive:35C32018-10-22T12:40:50Z<p>Ragnaroek23: </p>
<hr />
<div>Planning for 35C3, this years' chaos communication congress, in Leipzig.<br />
<br />
== Tickets ==<br />
We got a Chaos Voucher from MuCCC (thank you). Who wants it?<br />
<br />
Members:<br />
* Uli (done)<br />
* Karim<br />
* who else?<br />
<br />
Friends of members:<br />
* Roman (-> Nico) (Uli gave Nico the new code for his friend Roman cause no member is currently waiting)<br />
* Jonas (-> German)<br />
* Elli (-> Karim)<br />
* Arndt (-> Karim)<br />
* Chokri (-> Karim)<br />
<br />
Members have priority over friends!<br />
<br />
If you've gotten the voucher, mark yourself off the list above, buy your ticket, and have the replicated one sent back to yourself or even better directly to the next person. Pay right away, otherwise you won't get the replicated voucher. Then look on the list above and send it to the next person on there.<br />
<br />
== Congress Everywhere ==<br />
Some people may not go to congress, but still want to be part of the experience. Let's have a Congress Everywhere celebration at the space, with watching some talks, having some workshops/meetups, food, etc. <br />
<br />
Who's interested in participating?<br />
* Severin<br />
* Tobi<br />
* German</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:35C3&diff=3609Archive:35C32018-10-17T11:17:13Z<p>Ragnaroek23: </p>
<hr />
<div>Planning for 35C3, this years' chaos communication congress, in Leipzig.<br />
<br />
== Tickets ==<br />
We got a Chaos Voucher from MuCCC (thank you). Who wants it?<br />
<br />
Members:<br />
* Uli (done)<br />
* Karim<br />
* who else?<br />
<br />
Friends of members:<br />
* Roman (-> Nico) (Uli gave Nico the new code for his friend Roman cause no member is currently waiting)<br />
* Jonas (-> German)<br />
* Elli (-> Karim)<br />
* Arndt (-> Karim)<br />
<br />
Members have priority over friends!<br />
<br />
If you've gotten the voucher, mark yourself off the list above, buy your ticket, and have the replicated one sent back to yourself or even better directly to the next person. Pay right away, otherwise you won't get the replicated voucher. Then look on the list above and send it to the next person on there.<br />
<br />
== Congress Everywhere ==<br />
Some people may not go to congress, but still want to be part of the experience. Let's have a Congress Everywhere celebration at the space, with watching some talks, having some workshops/meetups, food, etc. <br />
<br />
Who's interested in participating?<br />
* Severin<br />
* Tobi<br />
* German</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Decisions&diff=3186Decisions2018-01-24T17:02:34Z<p>Ragnaroek23: /* Plenum */</p>
<hr />
<div>{{AttentionBox<br />
| title=Work in progress<br />
| msg= This is not an "official" document (if there ever is such a thing), but rather a draft for further discussion. When in doubt, ask [[User:Tiefpunkt|Severin]].<br />
}}<br />
<br />
Over time, the space has collected a number of rules, which were decided on in different Plena. We've done this for a few years now, so it's gotten a bit hard to keep track of these rules, especially for new members. Cécile and Severin took the time to go through all old Plenum minutes and collect these rules. The idea is to look over them again, and then summarize them a bit better and give them a proper place here in the wiki (e.g. [[Law and Order]]?) and print them out and put them in the space somewhere.<br />
<br />
=== Corporate Membership ===<br />
* Firmen koennen Mitglied im Verein werden können.<br />
* Empfehlung einer monatl. Spende zusätzlich zum Mitgliedsbeitrag<br />
* Kein "eigener" Mitgliedsbeitrag für Firmen möglich ohne MV [[20140817 Plenum]]<br />
* Ist eine Person sowohl privates Mitglied als auch Vertreterin einer Firma mit Mitgliedstatus, erhält sie trotzdem bei Abstimmungen nur eine Stimme.<br />
<br />
=== Cleanups ===<br />
* Zentrale Tische dürfen nicht längerfristig mit einem Projekt belegt werden, sollten immer freigelassen werden<br />
[[20150124 Plenum]]<br />
* Tische in der Mitte generell frei lassen. Sowie den Gemeinschaftstisch im Mittelbereich muss frei sein. [[20151018_Plenum]]<br />
* Ein Ordnungssystem für die teilweise überladenen Tische wäre nicht schlecht. Eine Möglichkeit wäre, eine Box bereitzustellen, in der nicht aufgeräumte Projekte des Vorgängers untergebracht werden können (mit der Folge, dass dieser (dh am besten jeder) beim Betreten des Raumes in der genannten Kiste nachschaute). [[20160124_Plenum]]<br />
* Zeug vom Tisch Kiste: jeden Donnerstag vor dem Mitgliedertreffen wird rotiert. Der erste Eintreffende führt die Rotation durch und erntet all den Ruhm. Kisteninhalt wird fotografiert und is Flowdock geworfen. Die Boxen sind nicht für Müll oder Werkzeuge vom Space gedacht. Beides gehört an den darüf designierten Platz. [[20160612_Plenum]]<br />
* Nach Benutzung Werkzeug bitte zurueck an seinen Platz raeumen. Die Werkzeugschubladen sind sortiert, bitte das Werkzeug entsprechend in die korrekte Schublade legen (Schraubenzieher, Zangen etc) [[20170302_Plenum]]<br />
* Räum bitte hinter Dir auf, wenn Du den Space verlässt (Abwasch machen, Deine Sachen vom Tisch räumen ...) [[20170302_Plenum]]<br />
* Pfandflaschen bitte in die korrekten Leergutkästen sortieren! [[20170302_Plenum]]<br />
* Wenn Du siehst, dass jemand vergessen hat hinter sich aufzuräumen, hilf bitte mit und räum fuer ihn/sie auf! [[20171214_Plenum]]<br />
* Bevor Du grössere Gegenstände in den Space umziehst, frag bitte im Slack oder im Plenum und klär die Raumbenutzung mit den anderen Mitgliedern. Oder bring es gleich zum Wertstoffhof. Beschrifte den Gegenstand mit einem Sticker o.ä., damit klar ist, wem das Ding gehört bzw wer es hergebracht hat. [[20171214_Plenum]] <br />
<br />
=== Lasercutter ===<br />
* Einführung Laserlogbuch (Papier) [[20150124 Plenum]]<br />
** Laserlogbuch ist verlorengegangen, es gibt noch keine abschliessende Entscheidung zum Ersatz [[LaserCutter/Log]] [[20171019_Plenum]]<br />
* Laserbenutzung nur nach Einführung [[20150124 Plenum]]<br />
<br />
* 2€ pro 10min fuer Mitglieder, 3€ fuer HuS, 4€ fuer nicht-Mitglieder [[20150315 Plenum]]<br />
<br />
<br />
* Kommerzielle Nutzung: Nichtkommerzielle Nutzung hat immer Vorrang<br />
* 5€/10min oder mehr, Spenden erwünscht<br />
* Überproportionale Nutzung des Spaces kommunizieren!<br />
[[20161009_Plenum]]<br />
<br />
=== Free To Use ===<br />
* Sachen die FreeToUse Regal sind, sind "vogelfrei". Dann sollte man damit rechnen, dass die Sachen fehlen. Nicht jedoch bei Gegenständen die NICHT FreeToUse sind.<br />
* Eventuell bei Dev-Boards ein/e dedizierte/s Kiste/Regal.<br />
<br />
<br />
=== 3D Printers ===<br />
* Derjenige, der den Drucker kaputt macht, sollte ihn nicht reparieren. [[20151018_Plenum]]<br />
* Der X350 Drucker darf nur von Personen benutzt werden, die zu diesem Drucker eine Einweisung bekommen haben. [[20151018_Plenum]]<br />
<br />
=== Kitchen ===<br />
* Küche sauber halten. [[20151018_Plenum]]<br />
<br />
=== Network ===<br />
* Freie IPAdressen stehen im WIKI drin und können darin entnommen werden und müssen dort eingetragen werden. Ansonsten sind sie vogelfrei. [[20151018_Plenum]]<br />
<br />
=== Storage ===<br />
* jedes Mitglied nur eine User Box innerhalb des Space [[20160124_Plenum]]<br />
* Nur noch eine Kiste pro Person. Kistenplätze sind nicht übertragbar. [[20160612_Plenum]]<br />
* Die drei Kisten beziehen sich nicht nur auf den Umzug, sondern auch für die Lagerung im neuen Space [[20170209 Plenum]]<br />
** Pro Mitglied werden beim Umzug vom alten in den neuen Space maximal 3 Ikea-Kisten umgezogen. [[20170119 Plenum]]<br />
* Ikea-Kisten werden ab sofort durch Euroboxen 40cm x 30cm x 22cm ersetzt. Gleiches Volumen bei geringerer Höhe und besserer Stapelbarkeit, dh es passen mehr in die Regale. [[20170518_Plenum]]<br />
* Anzahl Boxen pro Person wurde von 3 auf 2 reduziert. [[20170518_Plenum]]<br />
* Bitte benutzt nur Ikea- oder Euroboxen, alles andere wird aus den Regalen entfernt. [[20170518_Plenum]]<br />
* Zusaetzliche Aufbewahrungsmöglichkeiten koennen ab sofort gemietet werden: [[Storage space]] [[20170810_Plenum]]<br />
* Kisten ehemaliger Mitglieder: nach 6 Monaten Karenzzeit und Email-Errinerung wird die Mitgliederkiste aufgelöst, Kleinteile kommen in die Vending Machine, grössere Sachen werden versteigert. [[20170824_Plenum]]<br />
<br />
=== Sleeping in the space ===<br />
* Übernachten in Notfällen möglich, es soll aber nicht mehr mehrere Nächte in Folge passieren. Severin erinnert an die 6-3-1 Regel vom Congress (6h Schlaf, 3 Mahlzeiten, 1 Dusche pro Tag). [[20160124_Plenum]]<br />
<br />
=== Documentation ===<br />
* Es sollte jedes Projekt dokumentiert werden, das nicht in einer Box ist. Mindestens Aufkleber, vorzugsweise Wiki-Eintrag. Mehr dokumentieren im Wiki! [[20160612_Plenum]]<br />
* Geräte im Space sollten im Wiki dokumentiert werden. Falls ein Gerät defekt ist, wird es im Wiki mit einer Datumsangabe als defekt markiert. Das Gerät soll dann binnen 2 Monaten repariert werden, ansonsten geht es zurück an seinen Besitzer und verlässt den Space. [[20161211_Plenum]]<br />
* Code von MuMaLab-Projekten sollte öffentlich zugänglich sein (zb im MuMaLab Github) [[20170504 Plenum]]<br />
<br />
=== Access to the space ===<br />
* Das letzte Mitglied schickt beim Verlassen die Nicht-Mitglieder raus. [[20161009_Plenum]]<br />
* Schlüssel dürfen nicht weitergegeben werden, Ausnahmen können kommuniziert werden [[20161009_Plenum]]<br />
* Kinder im Hof: nicht mehr reinlassen, konsequent rausschmeissen (und zwar alle, konsequent) [[20170713_Plenum]]<br />
<br />
=== Unclear Rules ===<br />
* Miteinander reden. Wenn keine Klarheit, auf Plenum verschieben. Wenn schnelle Entscheidung notwendig, entscheidet der Vorstand [[20161009_Plenum]]<br />
<br />
=== Food & Drinks ===<br />
* Essen im Kühlschrank labeln [[20161009_Plenum]]<br />
* Getränke-Kühlschrank _NUR_ für Space-Getränke, alles andere in den Küchen-Kühlschrank [[20161009_Plenum]]<br />
<br />
=== Safety ===<br />
* Experimente mit dünnem Draht und 250V sind sehr gefährlich und dumm. Falls Du siehst dass jemand sowas macht, bitte greif ein. [[20161211_Plenum]]<br />
<br />
=== Finances & Transparency ===<br />
* Es gibt eine Wiki-Seite fuer Investitionsplanung, zB fuer den CNC Router, Lasercutter, usw. [[20161211_Plenum]]<br />
* Grössere Anschaffungen sollen per Email angekündigt werden. [[20161211_Plenum]]<br />
<br />
=== Plenum ===<br />
* Plenum einmal pro Woche für Umzugs- und Umbauzeit. Jeden Donnerstag zum Meetup. [[20161218_Plenum]]<br />
<br />
* Das Plenum ist eine Einrichtung, um zu entscheiden, wie der Space gestaltet werden soll - physisch, sozial, usw.<br />
* Alle Dinge, die den Space betreffen, sollten im Plenum diskutiert werden<br />
* Jeder, der anwesend ist, kann an einem Plenum teilnehmen - ob Mitglied oder nicht<br />
* Jeder kann ein Plenum leiten, ein Vorstand ist dafuer nicht noetig<br />
* Plenumsthemen sollten auf der Plenum Wiki Seite vorher angekündigt werden<br />
* Das Plenum sollte in einer Sprache gehalten werden, die alle Teilnehmer verstehen.<br />
[[20170810_Plenum]]<br />
<br />
=== Discussion culture ===<br />
* appelliert an alle, im Chat auf Stil und Umgangsformen zu achten und groessere Probleme persoenlich (F2F) zu klaeren. [[20170119_Plenum]]<br />
* Sexistische, homophobe Kommentare werden nicht toleriert. Bitte achte auf Deine Sprache! [[20170601_Plenum]]<br />
<br />
=== ToDo Lists ===<br />
* Es gibt jetzt eine Trello-Seite zum Managen der diversen Aufgaben im Space: https://trello.com/mumalab [[20170126_Plenum]]<br />
<br />
=== Borrowing stuff ===<br />
* Manchmal werden Dinge ausgeliehen und ausserhalb des Space verwendet. Bitte log diese Verwendung in der Wikiseite "Stuff on a mission" [[20170504_Plenum]]<br />
* Frag so früh wie moeglich [[20170504_Plenum]]<br />
<br />
=== Broken Stuff ===<br />
* Wir werden Hinweis-Schilder lasercutten, "Dieses Gerät ist defekt!" und sie auf defekten Maschinen plazieren. [[20170518_Plenum]]<br />
* Defekt heisst Defekt, bitte nicht benutzen! [[20171116_Plenum]]<br />
<br />
=== Waste ===<br />
* Wir sollten besser auf die Umwelt achten und den Muell ordentlich trennen. [[20170518_Plenum]]<br />
* Restmüll und Papier können jederzeit draussen in die Container geschmissen werden [[20171019_Plenum]]<br />
<br />
=== Dangerous Machines ===<br />
* Im Space gibt es diverse gefährliche Maschinen. Aufgrund der hohen Verletzungsgefahr und der Haftungsproblematik fuer den Verein und Vorstand müssen hier Regeln definiert werden. [[20170615_Plenum]]<br />
<br />
=== BBQ ===<br />
* Bitte den Grill nicht tagelang draussen rumstehen lassen. Über Nacht abkühlen lassen ist okay, aber danach bitte zurück in den Space damit. [[20170810_Plenum]]<br />
* Heisse Asche bitte in der Metalltonne entsorgen und nicht auf dem Asphalt ausleeren. [[20170810_Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Decisions&diff=3185Decisions2018-01-24T16:56:54Z<p>Ragnaroek23: Ich hab noch eine Regel hinzugefügt, auf die wir uns vor Ewigkeiten geeinigt haben, als das Thema zum ersten Mal aufkam</p>
<hr />
<div>{{AttentionBox<br />
| title=Work in progress<br />
| msg= This is not an "official" document (if there ever is such a thing), but rather a draft for further discussion. When in doubt, ask [[User:Tiefpunkt|Severin]].<br />
}}<br />
<br />
Over time, the space has collected a number of rules, which were decided on in different Plena. We've done this for a few years now, so it's gotten a bit hard to keep track of these rules, especially for new members. Cécile and Severin took the time to go through all old Plenum minutes and collect these rules. The idea is to look over them again, and then summarize them a bit better and give them a proper place here in the wiki (e.g. [[Law and Order]]?) and print them out and put them in the space somewhere.<br />
<br />
=== Corporate Membership ===<br />
* Firmen koennen Mitglied im Verein werden können.<br />
* Empfehlung einer monatl. Spende zusätzlich zum Mitgliedsbeitrag<br />
* Kein "eigener" Mitgliedsbeitrag für Firmen möglich ohne MV [[20140817 Plenum]]<br />
* Ist eine Person sowohl privates Mitglied als auch Vertreterin einer Firma mit Mitgliedstatus, erhält sie trotzdem bei Abstimmungen nur eine Stimme.<br />
<br />
=== Cleanups ===<br />
* Zentrale Tische dürfen nicht längerfristig mit einem Projekt belegt werden, sollten immer freigelassen werden<br />
[[20150124 Plenum]]<br />
* Tische in der Mitte generell frei lassen. Sowie den Gemeinschaftstisch im Mittelbereich muss frei sein. [[20151018_Plenum]]<br />
* Ein Ordnungssystem für die teilweise überladenen Tische wäre nicht schlecht. Eine Möglichkeit wäre, eine Box bereitzustellen, in der nicht aufgeräumte Projekte des Vorgängers untergebracht werden können (mit der Folge, dass dieser (dh am besten jeder) beim Betreten des Raumes in der genannten Kiste nachschaute). [[20160124_Plenum]]<br />
* Zeug vom Tisch Kiste: jeden Donnerstag vor dem Mitgliedertreffen wird rotiert. Der erste Eintreffende führt die Rotation durch und erntet all den Ruhm. Kisteninhalt wird fotografiert und is Flowdock geworfen. Die Boxen sind nicht für Müll oder Werkzeuge vom Space gedacht. Beides gehört an den darüf designierten Platz. [[20160612_Plenum]]<br />
* Nach Benutzung Werkzeug bitte zurueck an seinen Platz raeumen. Die Werkzeugschubladen sind sortiert, bitte das Werkzeug entsprechend in die korrekte Schublade legen (Schraubenzieher, Zangen etc) [[20170302_Plenum]]<br />
* Räum bitte hinter Dir auf, wenn Du den Space verlässt (Abwasch machen, Deine Sachen vom Tisch räumen ...) [[20170302_Plenum]]<br />
* Pfandflaschen bitte in die korrekten Leergutkästen sortieren! [[20170302_Plenum]]<br />
* Wenn Du siehst, dass jemand vergessen hat hinter sich aufzuräumen, hilf bitte mit und räum fuer ihn/sie auf! [[20171214_Plenum]]<br />
* Bevor Du grössere Gegenstände in den Space umziehst, frag bitte im Slack oder im Plenum und klär die Raumbenutzung mit den anderen Mitgliedern. Oder bring es gleich zum Wertstoffhof. Beschrifte den Gegenstand mit einem Sticker o.ä., damit klar ist, wem das Ding gehört bzw wer es hergebracht hat. [[20171214_Plenum]] <br />
<br />
=== Lasercutter ===<br />
* Einführung Laserlogbuch (Papier) [[20150124 Plenum]]<br />
** Laserlogbuch ist verlorengegangen, es gibt noch keine abschliessende Entscheidung zum Ersatz [[LaserCutter/Log]] [[20171019_Plenum]]<br />
* Laserbenutzung nur nach Einführung [[20150124 Plenum]]<br />
<br />
* 2€ pro 10min fuer Mitglieder, 3€ fuer HuS, 4€ fuer nicht-Mitglieder [[20150315 Plenum]]<br />
<br />
<br />
* Kommerzielle Nutzung: Nichtkommerzielle Nutzung hat immer Vorrang<br />
* 5€/10min oder mehr, Spenden erwünscht<br />
* Überproportionale Nutzung des Spaces kommunizieren!<br />
[[20161009_Plenum]]<br />
<br />
=== Free To Use ===<br />
* Sachen die FreeToUse Regal sind, sind "vogelfrei". Dann sollte man damit rechnen, dass die Sachen fehlen. Nicht jedoch bei Gegenständen die NICHT FreeToUse sind.<br />
* Eventuell bei Dev-Boards ein/e dedizierte/s Kiste/Regal.<br />
<br />
<br />
=== 3D Printers ===<br />
* Derjenige, der den Drucker kaputt macht, sollte ihn nicht reparieren. [[20151018_Plenum]]<br />
* Der X350 Drucker darf nur von Personen benutzt werden, die zu diesem Drucker eine Einweisung bekommen haben. [[20151018_Plenum]]<br />
<br />
=== Kitchen ===<br />
* Küche sauber halten. [[20151018_Plenum]]<br />
<br />
=== Network ===<br />
* Freie IPAdressen stehen im WIKI drin und können darin entnommen werden und müssen dort eingetragen werden. Ansonsten sind sie vogelfrei. [[20151018_Plenum]]<br />
<br />
=== Storage ===<br />
* jedes Mitglied nur eine User Box innerhalb des Space [[20160124_Plenum]]<br />
* Nur noch eine Kiste pro Person. Kistenplätze sind nicht übertragbar. [[20160612_Plenum]]<br />
* Die drei Kisten beziehen sich nicht nur auf den Umzug, sondern auch für die Lagerung im neuen Space [[20170209 Plenum]]<br />
** Pro Mitglied werden beim Umzug vom alten in den neuen Space maximal 3 Ikea-Kisten umgezogen. [[20170119 Plenum]]<br />
* Ikea-Kisten werden ab sofort durch Euroboxen 40cm x 30cm x 22cm ersetzt. Gleiches Volumen bei geringerer Höhe und besserer Stapelbarkeit, dh es passen mehr in die Regale. [[20170518_Plenum]]<br />
* Anzahl Boxen pro Person wurde von 3 auf 2 reduziert. [[20170518_Plenum]]<br />
* Bitte benutzt nur Ikea- oder Euroboxen, alles andere wird aus den Regalen entfernt. [[20170518_Plenum]]<br />
* Zusaetzliche Aufbewahrungsmöglichkeiten koennen ab sofort gemietet werden: [[Storage space]] [[20170810_Plenum]]<br />
* Kisten ehemaliger Mitglieder: nach 6 Monaten Karenzzeit und Email-Errinerung wird die Mitgliederkiste aufgelöst, Kleinteile kommen in die Vending Machine, grössere Sachen werden versteigert. [[20170824_Plenum]]<br />
<br />
=== Sleeping in the space ===<br />
* Übernachten in Notfällen möglich, es soll aber nicht mehr mehrere Nächte in Folge passieren. Severin erinnert an die 6-3-1 Regel vom Congress (6h Schlaf, 3 Mahlzeiten, 1 Dusche pro Tag). [[20160124_Plenum]]<br />
<br />
=== Documentation ===<br />
* Es sollte jedes Projekt dokumentiert werden, das nicht in einer Box ist. Mindestens Aufkleber, vorzugsweise Wiki-Eintrag. Mehr dokumentieren im Wiki! [[20160612_Plenum]]<br />
* Geräte im Space sollten im Wiki dokumentiert werden. Falls ein Gerät defekt ist, wird es im Wiki mit einer Datumsangabe als defekt markiert. Das Gerät soll dann binnen 2 Monaten repariert werden, ansonsten geht es zurück an seinen Besitzer und verlässt den Space. [[20161211_Plenum]]<br />
* Code von MuMaLab-Projekten sollte öffentlich zugänglich sein (zb im MuMaLab Github) [[20170504 Plenum]]<br />
<br />
=== Access to the space ===<br />
* Das letzte Mitglied schickt beim Verlassen die Nicht-Mitglieder raus. [[20161009_Plenum]]<br />
* Schlüssel dürfen nicht weitergegeben werden, Ausnahmen können kommuniziert werden [[20161009_Plenum]]<br />
* Kinder im Hof: nicht mehr reinlassen, konsequent rausschmeissen (und zwar alle, konsequent) [[20170713_Plenum]]<br />
<br />
=== Unclear Rules ===<br />
* Miteinander reden. Wenn keine Klarheit, auf Plenum verschieben. Wenn schnelle Entscheidung notwendig, entscheidet der Vorstand [[20161009_Plenum]]<br />
<br />
=== Food & Drinks ===<br />
* Essen im Kühlschrank labeln [[20161009_Plenum]]<br />
* Getränke-Kühlschrank _NUR_ für Space-Getränke, alles andere in den Küchen-Kühlschrank [[20161009_Plenum]]<br />
<br />
=== Safety ===<br />
* Experimente mit dünnem Draht und 250V sind sehr gefährlich und dumm. Falls Du siehst dass jemand sowas macht, bitte greif ein. [[20161211_Plenum]]<br />
<br />
=== Finances & Transparency ===<br />
* Es gibt eine Wiki-Seite fuer Investitionsplanung, zB fuer den CNC Router, Lasercutter, usw. [[20161211_Plenum]]<br />
* Grössere Anschaffungen sollen per Email angekündigt werden. [[20161211_Plenum]]<br />
<br />
=== Plenum ===<br />
* Plenum einmal pro Woche für Umzugs- und Umbauzeit. Jeden Donnerstag zum Meetup. [[20161218_Plenum]]<br />
<br />
* Das Plenum ist eine Einrichtung, um zu entscheiden, wie der Space gestaltet werden soll - physisch, sozial, usw.<br />
* Alle Dinge, die den Space betreffen, sollten im Plenum diskutiert werden<br />
* Jeder, der anwesend ist, kann an einem Plenum teilnehmen - ob Mitglied oder nicht<br />
* Jeder kann ein Plenum leiten, ein Vorstand ist dafuer nicht noetig<br />
* Plenumsthemen sollten auf der Plenum Wiki Seite vorher angekündigt werden<br />
* Das Plenum sollte in einer Sprache gehalten werden, die alle Teilenehmer verstehen.<br />
[[20170810_Plenum]]<br />
<br />
=== Discussion culture ===<br />
* appelliert an alle, im Chat auf Stil und Umgangsformen zu achten und groessere Probleme persoenlich (F2F) zu klaeren. [[20170119_Plenum]]<br />
* Sexistische, homophobe Kommentare werden nicht toleriert. Bitte achte auf Deine Sprache! [[20170601_Plenum]]<br />
<br />
=== ToDo Lists ===<br />
* Es gibt jetzt eine Trello-Seite zum Managen der diversen Aufgaben im Space: https://trello.com/mumalab [[20170126_Plenum]]<br />
<br />
=== Borrowing stuff ===<br />
* Manchmal werden Dinge ausgeliehen und ausserhalb des Space verwendet. Bitte log diese Verwendung in der Wikiseite "Stuff on a mission" [[20170504_Plenum]]<br />
* Frag so früh wie moeglich [[20170504_Plenum]]<br />
<br />
=== Broken Stuff ===<br />
* Wir werden Hinweis-Schilder lasercutten, "Dieses Gerät ist defekt!" und sie auf defekten Maschinen plazieren. [[20170518_Plenum]]<br />
* Defekt heisst Defekt, bitte nicht benutzen! [[20171116_Plenum]]<br />
<br />
=== Waste ===<br />
* Wir sollten besser auf die Umwelt achten und den Muell ordentlich trennen. [[20170518_Plenum]]<br />
* Restmüll und Papier können jederzeit draussen in die Container geschmissen werden [[20171019_Plenum]]<br />
<br />
=== Dangerous Machines ===<br />
* Im Space gibt es diverse gefährliche Maschinen. Aufgrund der hohen Verletzungsgefahr und der Haftungsproblematik fuer den Verein und Vorstand müssen hier Regeln definiert werden. [[20170615_Plenum]]<br />
<br />
=== BBQ ===<br />
* Bitte den Grill nicht tagelang draussen rumstehen lassen. Über Nacht abkühlen lassen ist okay, aber danach bitte zurück in den Space damit. [[20170810_Plenum]]<br />
* Heisse Asche bitte in der Metalltonne entsorgen und nicht auf dem Asphalt ausleeren. [[20170810_Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:34C3&diff=2835Archive:34C32017-09-07T12:43:49Z<p>Ragnaroek23: </p>
<hr />
<div>Planning for 34C3, this years' chaos communication congress, in Leipzig.<br />
<br />
== Tickets ==<br />
We got a Chaos Voucher from MuCCC (thank you). Who wants it?<br />
* <del>Severin</del><br />
* <del>Cecile</del><br />
* <del>Eymen</del><br />
* <del>Franzi (-> Paul)</del><br />
* <del>Marcus (-> Nico)</del><br />
* <del>Karim</del><br />
* <del>Elias</del><br />
* JanS<br />
* Roman (-> Nico) Feel free to add yourself above me<br />
* Elias (wants a second ticket for a friend - feel free to get above me)<br />
* Karim (wants a second ticket for a friend - feel free to get above me)<br />
<br />
If you've gotten the voucher, mark yourself off the list above, buy your ticket, and have the replicated one sent back to yourself. Pay right away, otherwise you won't get the replicated voucher. Then look on the list above and send it to the next person on there.</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:34C3&diff=2792Archive:34C32017-08-24T10:27:11Z<p>Ragnaroek23: </p>
<hr />
<div>Planning for 34C3, this years' chaos communication congress, in Leipzig.<br />
<br />
== Tickets ==<br />
We got a Chaos Voucher from MuCCC (thank you). Who wants it?<br />
* <del>Severin</del><br />
* <del>Cecile</del><br />
* Eymen<br />
* Franzi (-> Paul)<br />
* Marcus (-> Nico)<br />
* Karim<br />
If you've gotten the voucher, mark yourself off the list above, buy your ticket, and have the replicated one sent back to yourself. Pay right away, otherwise you won't get the replicated voucher. Then look on the list above and send it to the next person on there.</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=2041Archive:Using the Laser Cutter2016-12-02T19:23:29Z<p>Ragnaroek23: /* Cleaning the filter */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Preparing files ==<br />
<br />
The software we use (LaserCAD) requires DXF files for paths you want to cut. It does not support the full feature set of DXF, so not every DXF works properly.<br />
<br />
=== Converting to DXF ===<br />
A process that usually work is getting your software (Inkscape, Illustrator, ...) to export an .EPS file, and convert it with PSTOEDIT, like so:<br />
<br />
pstoedit -dt -f 'dxf:-polyaslines -mm' input.eps output.dxf<br />
<br />
* [https://talk.vanhack.ca/t/lasercad-workflow/4960 More information on that workflow]<br />
* [http://www.pstoedit.net/ Downloads for Windows]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover to retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
; I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
: LaserCAD allows us to import DXF files. You need to convert your SVG file to a specially prepared DXF file. If you do not follow the following steps LaserCAD may show an empty layout after importing. <br />
:* Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
:* Step 2: group it (CTRL-g).<br />
:* Step 3: convert objects to path (SHIFT-CTRL-c). <br />
:* Step 4: convert contours to path (ATL-CTRL-c).<br />
:* Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
:* Step 6: done. Now you may import to LaserCAD<br />
<br />
; When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
: In case you pasted the missing elements into Inkscape by copy-pasting them from another document (even if it was another Inkscape document), the copied element is rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
:Likewise, maybe your DXF file was not created properly. Make sure you follow the steps under Question 1 of this FAQ.<br />
<br />
; How do I know the correct settings for speed and cutting power of the Laser ?<br />
: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
: In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
: The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
; Is it possible to use the Laser Control computer from remote?<br />
: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
; How can I overlay multiple imported sketches in LaserCAD?<br />
:When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
; "Holy smokes that's a lot of smoke!" aka "What's that smell?"<br />
:What material are you cutting? Maybe it's not meant for laser cutting.<br />
:Also check under "Maintenance", "Cleaning the filter".<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
=== Cleaning the filter ===<br />
In the dirt room, you find the laser's venting system.<br />
Look for the the wooden box with the wing nuts. Before you open it, get a plastic bag or a crate.<br />
<br />
<br />
[[File:What's in the box.png|200px]]<br />
<br />
<br />
Inside the box you'll find a blue filter mat. It's not blue anymore? Then it's time to clean it.<br />
<br />
Take a good look at its position before taking it out. Try to put it in the bag/box right away, so you don't get ash and dust over everything.<br />
<br />
Take it outside, and give it a good pounding. A stick or a broom are the weapon of choice.<br />
<br />
Put everything back, and voilà! Nobody dies of asphyxiation!<br />
<br />
=== [[Flow Sensor]] ===<br />
<br />
=== [[Cooling System]] ===<br />
<br />
=== [[Alignment of the laser beam]] ===<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=User:Ragnaroek23&diff=2040User:Ragnaroek232016-12-02T19:15:49Z<p>Ragnaroek23: </p>
<hr />
<div>Karim<br />
<br />
some dude... (more to follow)<br />
<br />
== Contact ==<br />
* Phone: Ol52O8 - 466925<br />
* Mail: me (at) karimhamdi (dot) de<br />
* Facebook: [https://www.facebook.com/KarimDreiDdruck Karim Druck]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=User:Ragnaroek23&diff=2039User:Ragnaroek232016-12-02T19:15:27Z<p>Ragnaroek23: </p>
<hr />
<div>Karim<br />
<br />
some dude... (more to follow)<br />
<br />
== Contact ==<br />
* Phone: Ol52O8 - 466925<br />
* Mail: me (at) karimhamdi (dot) de<br />
* Facebook: [https://www.facebook.com/karim.druck Karim Druck]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2038Archive:Exodus2016-12-02T18:52:13Z<p>Ragnaroek23: /* Properties */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* >100m² only for us or >140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
==== Properties ====<br />
* [https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]<br />
* [https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and Werk 3 has opened.<br />
<br />
==== Properties ====<br />
* [http://www.werk3-muenchen.de| Werk3]<br />
<br />
=== Westend ===<br />
<br />
<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
==== Properties ====<br />
* [http://www.mgh-muc.de/startseite/|Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.]<br />
<br />
=== Misc ===<br />
everywhere else<br />
==== Properties ====<br />
* [http://www.immonet.de/angebot/27472176?drop=lp&exproot=halle-lager-produktion| Riesenräume in Untergiesing!]<br />
<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2037Archive:Exodus2016-12-02T18:51:19Z<p>Ragnaroek23: /* Properties */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* >100m² only for us or >140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
==== Properties ====<br />
* [https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]<br />
* [https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and Werk 3 has opened.<br />
<br />
==== Properties ====<br />
* [http://www.werk3-muenchen.de| Werk3]<br />
<br />
=== Westend ===<br />
<br />
<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
==== Properties ====<br />
* [http://www.mgh-muc.de/startseite/|Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.]<br />
<br />
=== Misc ===<br />
everywhere else<br />
==== Properties ====<br />
* [http://www.immonet.de/angebot/27472176?drop=lp&exproot=halle-lager-produktion| Untergiesing]<br />
<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2036Archive:Exodus2016-12-02T18:50:53Z<p>Ragnaroek23: /* Kunstpark Ost */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* >100m² only for us or >140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
==== Properties ====<br />
* [https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]<br />
* [https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and Werk 3 has opened.<br />
<br />
==== Properties ====<br />
* [http://www.werk3-muenchen.de| Werk3]<br />
<br />
=== Westend ===<br />
<br />
<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
==== Properties ====<br />
* [http://www.mgh-muc.de/startseite/|Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.]<br />
<br />
=== Misc ===<br />
everywhere else<br />
==== Properties ====<br />
* [http://www.immonet.de/angebot/27472176?drop=lp&exproot=halle-lager-produktion|Untergiesing]<br />
<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2035Archive:Exodus2016-12-02T18:50:10Z<p>Ragnaroek23: </p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* >100m² only for us or >140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
==== Properties ====<br />
* [https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]<br />
* [https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
=== Westend ===<br />
<br />
<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
==== Properties ====<br />
* [http://www.mgh-muc.de/startseite/|Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.]<br />
<br />
=== Misc ===<br />
everywhere else<br />
==== Properties ====<br />
* [http://www.immonet.de/angebot/27472176?drop=lp&exproot=halle-lager-produktion|Untergiesing]<br />
<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2034Archive:Exodus2016-12-02T18:48:58Z<p>Ragnaroek23: </p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* >100m² only for us or >140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
==== Properties ====<br />
* [[https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]]<br />
* [[https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
=== Westend ===<br />
<br />
http://www.mgh-muc.de/startseite/ - Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
=== Misc ===<br />
everywhere else<br />
==== Properties ====<br />
* [[http://www.immonet.de/angebot/27472176?drop=lp&exproot=halle-lager-produktion|Untergiesing]]<br />
<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2033Archive:Exodus2016-12-02T18:22:57Z<p>Ragnaroek23: /* requirements */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* >100m² only for us or >140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* [[https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]]<br />
* [[https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
http://www.mgh-muc.de/startseite/ - Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2032Archive:Exodus2016-12-02T18:18:52Z<p>Ragnaroek23: /* Properties */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* 100+ m² only for us or 140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* [[https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]]<br />
* [[https://www.immobilienscout24.de/expose/91407960|alte Papierfabrik]]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
http://www.mgh-muc.de/startseite/ - Muenchner Gewerbehoefe, im Westend-Gewerbehof ist das FabLab.<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2030Archive:Exodus2016-12-02T18:16:09Z<p>Ragnaroek23: /* requirements */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* 100+ m² only for us or 140m² with the HuS<br />
* ~ 12€/m²<br />
* accessible for every member 24/7<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* [[https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2029Archive:Exodus2016-12-02T18:15:38Z<p>Ragnaroek23: /* Properties */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* 100+ m² only for us or 140m² with the HuS<br />
* ~ 12€/m²<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* [[https://www.immobilienscout24.de/expose/90141446|Multifunktionale Gewerbefläche bei W+W Hardware + Software GmbH]]<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2028Archive:Exodus2016-12-02T18:12:20Z<p>Ragnaroek23: /* Properties */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* 100+ m² only for us or 140m² with the HuS<br />
* ~ 12€/m²<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
*<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2027Archive:Exodus2016-12-02T18:10:09Z<p>Ragnaroek23: /* requirements */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
* 100+ m² only for us or 140m² with the HuS<br />
* ~ 12€/m²<br />
* Easily reachable via public transportation<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* https://www.immobilienscout24.de/expose/91407960<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2026Archive:Exodus2016-12-02T18:07:01Z<p>Ragnaroek23: /* Properties */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
<br />
<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* https://www.immobilienscout24.de/expose/91407960<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2025Archive:Exodus2016-12-02T18:02:37Z<p>Ragnaroek23: /* possible locations */</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
<br />
<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* <br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2024Archive:Exodus2016-12-02T18:02:03Z<p>Ragnaroek23: </p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== requirements ==<br />
<br />
<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke.<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
==== Properties ====<br />
* <br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox³ is still there, and [[http://www.werk3-muenchen.de| Werk3]] has opened.<br />
<br />
<br />
=== Westend ===<br />
<br />
Cool part of the city, some office space there. Not sure if it's not to expensive by now<br />
<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 19:02, 2 December 2016 (CET)<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Exodus&diff=2023Archive:Exodus2016-12-02T17:44:18Z<p>Ragnaroek23: We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!</p>
<hr />
<div>{{project<br />
|name = Exodus<br />
|status = experimental<br />
|image = Exodus.jpg<br />
|description = we need new rooms and fast! <br />
|author = <br />
|username = <br />
|version = <br />
|update = <br />
|platform = <br />
|license = <br />
|download = <br />
}}<br />
<br />
We have to leave the Siemenswerke by February so let's for a bigger, better, and more awesome space!!!<br />
<br />
== possible locations ==<br />
<br />
=== Pasing ===<br />
<br />
Due to the Pasing Arcaden, a lot of shops had to leave the area. It's a bit far of, but there are lots of S-Bahn, Buses and a Tram going there, so it's about as easy to reach than the Siemenswerke. [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:44, 2 December 2016 (CET)<br />
<br />
=== Kunstpark Ost ===<br />
<br />
Back to the roots! The Werkbox is still <br />
<br />
<br />
=== Westend ===<br />
<br />
<br />
<br />
[[Category:Project]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=File:Exodus.jpg&diff=2022File:Exodus.jpg2016-12-02T17:41:01Z<p>Ragnaroek23: Public domain picture</p>
<hr />
<div><br />
<br />
Public domain picture</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1896Plenum2016-10-09T11:19:04Z<p>Ragnaroek23: /* Topics for the next Plenum */</p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' October 9th<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
* IR Camera - No progress<br />
: [[20160814 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
: - Allocation of Banners to events around the MunichMakerLab. During the Leopold/Streetlife Festival the banners were missing for the booth. A lot of people had difficulties finding the booth because of the understated decoration. The communication about the banner was also distressing. Eax.<br />
<br />
; Road Trip!<br />
: A couple of us are planning a trip to Calafou Europe's first and only eco tech village. Who wants to join?<br />
http://calafou.org/en/content/open-doors-journey-autumn-2016<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 13:18, 9 October 2016 (CEST) <br />
<br />
; Handling of member access keys<br />
: Can we trust our members to not give away their keys to untrustworthy people? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; How do we handle unclear rules?<br />
: Proposition 1) Members make their own responsible decisions until the rule can be specified in the next plenum.<br />
: Proposition 2) Have the Vorstand decide for everyone until the next Plenum.<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Theft, openness and hospitality<br />
: The recent theft has shaken a lot of our members. Do we have to rethink our openness? Are the two even linked? <br />
: What can we do to not let this seep into our attitude towards our guests?<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Non-members alone in the space<br />
: What do we do when you're the last member to leave the space, but there are still other people present? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Commercial use of the laser cutter<br />
: Do we need some kind of special handling of commercial use of the laser cutter? <br />
: Do we even want that? Maybe other rates? Or no difference at all? Where is the boundary of fair use? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; Buying more stuff?<br />
: I'd like to play around with LoRaWAN, should we buy a LoRa Gateway for the space? Costs are about 300€. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Tech literacy workshops for refugees with engineers without borders <br />
: My flatmate is an engineer without borders and asked me if we (Mumaland) could cooperate. They are planing to do a couple of tech workshops for refugees, and are looking for a space to host them. <br />
: I think its a great opportunity to extend some of our tried and tested openness to a new group of people, and to make interesting contacts to other nerds.<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:08, 1 October 2016 (CEST)<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1895Plenum2016-10-09T10:57:13Z<p>Ragnaroek23: /* Topics for the next Plenum */</p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' October 9th<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
* IR Camera - No progress<br />
: [[20160814 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
: - Allocation of Banners to events around the MunichMakerLab. During the Leopold/Streetlife Festival the banners were missing for the booth. A lot of people had difficulties finding the booth because of the understated decoration. The communication about the banner was also distressing. Eax.<br />
<br />
; Road Trip!<br />
: A couple of us are planning a trip to Calafou Europe's first and only eco tech village. Who wants to join?<br />
http://calafou.org/en/content/open-doors-journey-autumn-2016<br />
<br />
; Handling of member access keys<br />
: Can we trust our members to not give away their keys to untrustworthy people? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; How do we handle unclear rules?<br />
: Proposition 1) Members make their own responsible decisions until the rule can be specified in the next plenum.<br />
: Proposition 2) Have the Vorstand decide for everyone until the next Plenum.<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Theft, openness and hospitality<br />
: The recent theft has shaken a lot of our members. Do we have to rethink our openness? Are the two even linked? <br />
: What can we do to not let this seep into our attitude towards our guests?<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Non-members alone in the space<br />
: What do we do when you're the last member to leave the space, but there are still other people present? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Commercial use of the laser cutter<br />
: Do we need some kind of special handling of commercial use of the laser cutter? <br />
: Do we even want that? Maybe other rates? Or no difference at all? Where is the boundary of fair use? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; Buying more stuff?<br />
: I'd like to play around with LoRaWAN, should we buy a LoRa Gateway for the space? Costs are about 300€. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Tech literacy workshops for refugees with engineers without borders <br />
: My flatmate is an engineer without borders and asked me if we (Mumaland) could cooperate. They are planing to do a couple of tech workshops for refugees, and are looking for a space to host them. <br />
: I think its a great opportunity to extend some of our tried and tested openness to a new group of people, and to make interesting contacts to other nerds.<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:08, 1 October 2016 (CEST)<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1894Plenum2016-10-09T10:56:34Z<p>Ragnaroek23: /* Topics for the next Plenum */</p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' October 9th<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
* IR Camera - No progress<br />
: [[20160814 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
: - Allocation of Banners to events around the MunichMakerLab. During the Leopold/Streetlife Festival the banners were missing for the booth. A lot of people had difficulties finding the booth because of the understated decoration. The communication about the banner was also distressing. Eax.<br />
<br />
; Road Trip!<br />
: A couple of us are planning a trip to Calafou Europe's first and only eco tech village. Who wants to join?<br />
<br />
; Handling of member access keys<br />
: Can we trust our members to not give away their keys to untrustworthy people? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; How do we handle unclear rules?<br />
: Proposition 1) Members make their own responsible decisions until the rule can be specified in the next plenum.<br />
: Proposition 2) Have the Vorstand decide for everyone until the next Plenum.<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Theft, openness and hospitality<br />
: The recent theft has shaken a lot of our members. Do we have to rethink our openness? Are the two even linked? <br />
: What can we do to not let this seep into our attitude towards our guests?<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Non-members alone in the space<br />
: What do we do when you're the last member to leave the space, but there are still other people present? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Commercial use of the laser cutter<br />
: Do we need some kind of special handling of commercial use of the laser cutter? <br />
: Do we even want that? Maybe other rates? Or no difference at all? Where is the boundary of fair use? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; Buying more stuff?<br />
: I'd like to play around with LoRaWAN, should we buy a LoRa Gateway for the space? Costs are about 300€. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Tech literacy workshops for refugees with engineers without borders <br />
: My flatmate is an engineer without borders and asked me if we (Mumaland) could cooperate. They are planing to do a couple of tech workshops for refugees, and are looking for a space to host them. <br />
: I think its a great opportunity to extend some of our tried and tested openness to a new group of people, and to make interesting contacts to other nerds.<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:08, 1 October 2016 (CEST)<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=1891Archive:Using the Laser Cutter2016-10-08T21:49:14Z<p>Ragnaroek23: /* Cleaning the filter */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover to retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
Question 1: I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
<br />
A: LaserCAD allows us to import DXF files. You need to convert your SVG file to a <br />
specially prepared DXF file. If you do not follow the following steps LaserCAD may <br />
show an empty layout after importing. <br />
Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
Step 2: group it (CTRL-g).<br />
Step 3: convert objects to path (SHIFT-CTRL-c). <br />
Step 4: convert contours to path (ATL-CTRL-c).<br />
Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
Step 6: done. Now you may import to LaserCAD<br />
<br />
Question 2: When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
<br />
A: In case you pasted the missing elements into Inkscape by copy-pasting them from<br />
another document (even if it was another Inkscape document), the copied element is<br />
rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
Likewise, maybe your DXF file was not created properly. Make sure you follow the steps<br />
under Question 1 of this FAQ.<br />
<br />
Question 3: How do I know the correct settings for speed and cutting power of the Laser ?<br />
<br />
A: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
Question 4: Is it possible to use the Laser Control computer from remote?<br />
<br />
A: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
Question 5: How can I overlay multiple imported sketches in LaserCAD?<br />
<br />
A: When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
Question 6: "Holy smokes that's a lot of smoke!" aka "What's that smell?"<br />
<br />
A: What material are you cutting? Maybe it's not meant for laser cutting.<br />
Also check under "Maintenance", "Cleaning the filter".<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
=== Cleaning the filter ===<br />
In the dirt room, you find the laser's venting system.<br />
Look for the the wooden box with the wing nuts. Before you open it, get a plastic bag or a box.<br />
<br />
<br />
[[File:What's in the box.png|200px]]<br />
<br />
<br />
Inside the box you'll find a blue filter mat. It's not blue anymore? Then it's time to clean it.<br />
<br />
Take a good look at its position before taking it out. Try to put it in the bag/box right away, so you don't get ash and dust over everything.<br />
<br />
Take it outside, and give it a good pounding. A stick or a broom are the weapon of choice.<br />
<br />
Put everything back, and voilà! Nobody dies of asphyxiation!<br />
<br />
=== [[Flow Sensor]] ===<br />
<br />
=== [[Cooling System]] ===<br />
<br />
=== [[Alignment of the laser beam]] ===<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=1890Archive:Using the Laser Cutter2016-10-08T21:48:25Z<p>Ragnaroek23: /* Common problems and FAQ */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover to retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
Question 1: I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
<br />
A: LaserCAD allows us to import DXF files. You need to convert your SVG file to a <br />
specially prepared DXF file. If you do not follow the following steps LaserCAD may <br />
show an empty layout after importing. <br />
Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
Step 2: group it (CTRL-g).<br />
Step 3: convert objects to path (SHIFT-CTRL-c). <br />
Step 4: convert contours to path (ATL-CTRL-c).<br />
Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
Step 6: done. Now you may import to LaserCAD<br />
<br />
Question 2: When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
<br />
A: In case you pasted the missing elements into Inkscape by copy-pasting them from<br />
another document (even if it was another Inkscape document), the copied element is<br />
rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
Likewise, maybe your DXF file was not created properly. Make sure you follow the steps<br />
under Question 1 of this FAQ.<br />
<br />
Question 3: How do I know the correct settings for speed and cutting power of the Laser ?<br />
<br />
A: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
Question 4: Is it possible to use the Laser Control computer from remote?<br />
<br />
A: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
Question 5: How can I overlay multiple imported sketches in LaserCAD?<br />
<br />
A: When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
Question 6: "Holy smokes that's a lot of smoke!" aka "What's that smell?"<br />
<br />
A: What material are you cutting? Maybe it's not meant for laser cutting.<br />
Also check under "Maintenance", "Cleaning the filter".<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
=== Cleaning the filter ===<br />
In the dirt room, you find the laser's venting system.<br />
Look for the the wooden box with the wing nuts. Before you open it, get a plastic bag or a box.<br />
<br />
<br />
[[File:What's in the box.png]]<br />
<br />
<br />
Inside the box you'll find a blue filter mat. It's not blue anymore? Then it's time to clean it.<br />
<br />
Take a good look at its position before taking it out. Try to put it in the bag/box right away, so you don't get ash and dust over everything.<br />
<br />
Take it outside, and give it a good pounding. A stick or a broom are the weapon of choice.<br />
<br />
Put everything back, and voilà! Nobody dies of asphyxiation!<br />
<br />
=== [[Flow Sensor]] ===<br />
<br />
=== [[Cooling System]] ===<br />
<br />
=== [[Alignment of the laser beam]] ===<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=1888Archive:Using the Laser Cutter2016-10-08T11:54:06Z<p>Ragnaroek23: /* Common problems and FAQ */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover the retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
Question 1: I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
<br />
A: LaserCAD allows us to import DXF files. You need to convert your SVG file to a <br />
specially prepared DXF file. If you do not follow the following steps LaserCAD may <br />
show an empty layout after importing. <br />
Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
Step 2: group it (CTRL-g).<br />
Step 3: convert objects to path (SHIFT-CTRL-c). <br />
Step 4: convert contours to path (ATL-CTRL-c).<br />
Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
Step 6: done. Now you may import to LaserCAD<br />
<br />
Question 2: When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
<br />
A: In case you pasted the missing elements into Inkscape by copy-pasting them from<br />
another document (even if it was another Inkscape document), the copied element is<br />
rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
Likewise, maybe your DXF file was not created properly. Make sure you follow the steps<br />
under Question 1 of this FAQ.<br />
<br />
Question 3: How do I know the correct settings for speed and cutting power of the Laser ?<br />
<br />
A: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
Question 4: Is it possible to use the Laser Control computer from remote?<br />
<br />
A: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
Question 5: How can I overlay multiple imported sketches in LaserCAD?<br />
<br />
A: When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
Question 6: "Holy smokes that's a lot of smoke!" aka "What's that smell?"<br />
<br />
A: What material are you cutting? Maybe it's not mean for laser cutting.<br />
Also check under "Maintenance", "Cleaning the filter".<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
=== Cleaning the filter ===<br />
In the dirt room, you find the laser's venting system.<br />
Look for the the wooden box with the wing nuts. Before you open it, get a plastic bag or a box.<br />
<br />
<br />
[[File:What's in the box.png]]<br />
<br />
<br />
Inside the box you'll find a blue filter mat. It's not blue anymore? Then it's time to clean it.<br />
<br />
Take a good look at its position before taking it out. Try to put it in the bag/box right away, so you don't get ash and dust over everything.<br />
<br />
Take it outside, and give it a good pounding. A stick or a broom are the weapon of choice.<br />
<br />
Put everything back, and voilà! Nobody dies of asphyxiation!<br />
<br />
=== [[Flow Sensor]] ===<br />
<br />
=== [[Cooling System]] ===<br />
<br />
=== [[Alignment of the laser beam]] ===<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=1887Archive:Using the Laser Cutter2016-10-08T11:47:53Z<p>Ragnaroek23: /* Cleaning the Filter */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover the retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
Question 1: I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
<br />
A: LaserCAD allows us to import DXF files. You need to convert your SVG file to a <br />
specially prepared DXF file. If you do not follow the following steps LaserCAD may <br />
show an empty layout after importing. <br />
Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
Step 2: group it (CTRL-g).<br />
Step 3: convert objects to path (SHIFT-CTRL-c). <br />
Step 4: convert contours to path (ATL-CTRL-c).<br />
Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
Step 6: done. Now you may import to LaserCAD<br />
<br />
Question 2: When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
<br />
A: In case you pasted the missing elements into Inkscape by copy-pasting them from<br />
another document (even if it was another Inkscape document), the copied element is<br />
rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
Likewise, maybe your DXF file was not created properly. Make sure you follow the steps<br />
under Question 1 of this FAQ.<br />
<br />
Question 3: How do I know the correct settings for speed and cutting power of the Laser ?<br />
<br />
A: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
Question 4: Is it possible to use the Laser Control computer from remote?<br />
<br />
A: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
Question 5: How can I overlay multiple imported sketches in LaserCAD?<br />
<br />
A: When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
=== Cleaning the filter ===<br />
In the dirt room, you find the laser's venting system.<br />
Look for the the wooden box with the wing nuts. Before you open it, get a plastic bag or a box.<br />
<br />
<br />
[[File:What's in the box.png]]<br />
<br />
<br />
Inside the box you'll find a blue filter mat. It's not blue anymore? Then it's time to clean it.<br />
<br />
Take a good look at its position before taking it out. Try to put it in the bag/box right away, so you don't get ash and dust over everything.<br />
<br />
Take it outside, and give it a good pounding. A stick or a broom are the weapon of choice.<br />
<br />
Put everything back, and voilà! Nobody dies of asphyxiation!<br />
<br />
=== [[Flow Sensor]] ===<br />
<br />
=== [[Cooling System]] ===<br />
<br />
=== [[Alignment of the laser beam]] ===<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=1886Archive:Using the Laser Cutter2016-10-08T11:36:32Z<p>Ragnaroek23: /* Maintenance */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover the retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
Question 1: I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
<br />
A: LaserCAD allows us to import DXF files. You need to convert your SVG file to a <br />
specially prepared DXF file. If you do not follow the following steps LaserCAD may <br />
show an empty layout after importing. <br />
Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
Step 2: group it (CTRL-g).<br />
Step 3: convert objects to path (SHIFT-CTRL-c). <br />
Step 4: convert contours to path (ATL-CTRL-c).<br />
Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
Step 6: done. Now you may import to LaserCAD<br />
<br />
Question 2: When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
<br />
A: In case you pasted the missing elements into Inkscape by copy-pasting them from<br />
another document (even if it was another Inkscape document), the copied element is<br />
rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
Likewise, maybe your DXF file was not created properly. Make sure you follow the steps<br />
under Question 1 of this FAQ.<br />
<br />
Question 3: How do I know the correct settings for speed and cutting power of the Laser ?<br />
<br />
A: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
Question 4: Is it possible to use the Laser Control computer from remote?<br />
<br />
A: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
Question 5: How can I overlay multiple imported sketches in LaserCAD?<br />
<br />
A: When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
=== Cleaning the Filter ===<br />
In the dirt room, you find the laser's venting system.<br />
Look for the the wooden box with the wing nuts. Before you open it, get a plastic bag or a box.<br />
<br />
<br />
[[File:What's in the box.png]]<br />
<br />
<br />
Inside the box you'll find a blue filter mat. It's not blue anymore? Then it's time to clean it.<br />
<br />
Take a good look at its position before taking it out. Try to put it in the bag/box right away, so you don't get ash and dust over everything.<br />
<br />
Take it outside, and give it a good pounding. A stick or a broom are the weapon of choice.<br />
<br />
Put everything back, and voilà! Nobody dies of asphyxiation! <br />
<br />
=== [[Flow Sensor]] ===<br />
<br />
=== [[Cooling System]] ===<br />
<br />
=== [[Alignment of the laser beam]] ===<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=File:What%27s_in_the_box.png&diff=1885File:What's in the box.png2016-10-08T11:29:03Z<p>Ragnaroek23: </p>
<hr />
<div></div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Using_the_Laser_Cutter&diff=1884Archive:Using the Laser Cutter2016-10-08T11:18:37Z<p>Ragnaroek23: /* Maintenance */</p>
<hr />
<div><br />
<br />
This guide is intended as a reference work for those you already have experience with the [[LaserCutter|Laser Cutter]].<br />
<br />
If you are using the Laser Cutter for the first time, ask someone with experience to introduce you into the Laser Cutting World. <br />
There are many corner cases which are not covered within this guide.<br />
<br />
<br />
<br />
== SAFETY INDICATION ==<br />
<br />
If you like to watch the laser cutting head cut your design, make sure to use the<br />
laser protection goggles.<br />
<br />
In case of a fire, use the fire extinguisher which is located in the proximity of the Laser Cutter.<br />
<br />
To have an overview about the variety of material which is suitable for cutting, please refer to <br />
[http://atxhackerspace.org/wiki/Laser_Cutter_Materials]<br />
<br />
== Getting Files to the Laser-PC ==<br />
<br />
The easiest way to do this is by using hawking, our file server. It should automatically be discovered by your OS. If it isn't, it's offering a samba share at 10.10.20.61 or hawking.local.<br />
<br />
The same share is automatically mounted on the Laser-PC.<br />
To access the Laser-PC, you have to use rdesktop. There are desktop shortcuts for this set up on the two workstations next to the laser. Otherwise, you can use this command on linux systems:<br />
rdesktop 10.10.20.81 -u makerman -p makerman<br />
<br />
== Starting the Laser Cutting System ==<br />
<br />
Import your design DXF file in LaserCAD. Set the cutting speed and power for the different<br />
cutting colors. For the exact speed and power settings, refer to the calibration templates<br />
that are in the black binder next to the laser.<br />
<br />
Turn on the Laser Cutter System (LCS) by switching the Main Power Switch at the Laser Control<br />
Panel (LCP).<br />
<br />
Turn on the venting system by using the switch on the LCP.<br />
<br />
Load the file to the LCS. To do so, press the Download button in the LaserCAD application<br />
on the LCS computer. LaserCAD will open dialog box, press Download again.<br />
<br />
== Placing the material on the cutting area ==<br />
<br />
Place your material board on top of the cutting area. Make sure no oddments are on the <br />
cutting area that would otherwise lead to an askew alignment of the material board.<br />
<br />
Align the origin position. The origin position corresponds to the top left corner of your<br />
design file. Use the cursor buttons on the LCP to move the laser cutting head to the<br />
position where you would like to start cutting the material.<br />
CAVEAT: When placing the material board to the utmost left position on the cutting platform , the first few centimeters from the left underneath the honeycomb of the cutting platform are <br />
obscured by the aluminum bar holding the honeycomb. Cutting in this area is dangerous. <br />
Therefore, do not cut within this area that is overlapping with the aluminum bar holding <br />
the honeycomb. Instead, shift the material board a few centimeters to the right such that<br />
none of the cutting area coincides with the aluminum bar underneath the honeycomb.<br />
<br />
When you have found the origin position, press the Origin button on the LCP to save the <br />
origin position. <br />
<br />
Press the Box button on the LCP. The LCS will drive the laser cutting head in a box around<br />
the predetermined cutting area, a so called bounding box. Make sure the area of the<br />
bounding box does not exceed your material board that you would like to cut.<br />
<br />
== Cutting==<br />
<br />
Focus the laser cutting head. Use the focussing board which lies around the LCS.<br />
<br />
Turn on the Laser by using the Laser switch on the LCP.<br />
<br />
When all of the above points are passed, make sure all control lights are green. <br />
<br />
You are now ready to start cutting. As stated above, if you like to watch the laser cut,<br />
put on the laser protection goggles.<br />
<br />
Then press the start button on the LCP to start cutting. <br />
<br />
After the LCS has finished cutting, switch of the laser using the Laser switch on the LCP.<br />
Then, open the cover the retrieve your freshly cut design. Enjoy!<br />
<br />
== Common problems and FAQ ==<br />
<br />
Question 1: I have an SVG file with my design. How can I use it in LaserCAD, the laser cutting app?<br />
<br />
A: LaserCAD allows us to import DXF files. You need to convert your SVG file to a <br />
specially prepared DXF file. If you do not follow the following steps LaserCAD may <br />
show an empty layout after importing. <br />
Step 1: mark all objects in your design in Inkscape (CTRL-a).<br />
Step 2: group it (CTRL-g).<br />
Step 3: convert objects to path (SHIFT-CTRL-c). <br />
Step 4: convert contours to path (ATL-CTRL-c).<br />
Step 5: save as DXF R14 file. Make sure the character set is set to Latin1.<br />
Step 6: done. Now you may import to LaserCAD<br />
<br />
Question 2: When importing my DXF file, which I have created with Inkscape, some of the elements are missing?<br />
<br />
A: In case you pasted the missing elements into Inkscape by copy-pasting them from<br />
another document (even if it was another Inkscape document), the copied element is<br />
rendered as a bitmap. This hinders it to be correctly converted to a path. <br />
Likewise, maybe your DXF file was not created properly. Make sure you follow the steps<br />
under Question 1 of this FAQ.<br />
<br />
Question 3: How do I know the correct settings for speed and cutting power of the Laser ?<br />
<br />
A: If you are using the LCS for the first time, ask someone with more experience to determine the correct settings. <br />
In general, one would first cut the calibration template with a new material to determine the material response to different combinations of speed and cutting power.<br />
The calibration template DXF is in ... (please add the file path) on the laser PC. Please save your cut calibration template to the black binder for further reference!<br />
<br />
Question 4: Is it possible to use the Laser Control computer from remote?<br />
<br />
A: Yes, if you are within the Munich Maker Lab Network. The login information is attached on a post-it note on the Laser PC.<br />
<br />
Question 5: How can I overlay multiple imported sketches in LaserCAD?<br />
<br />
A: When importing each single sketch, there is a checkbox "Preserve current document" in the file selection dialogue. If you enable this option, the new imported file will be overlayed on the current sketch. This option is particularly useful for engraving.<br />
<br />
== Maintenance ==<br />
Sometimes not all of the safety control and operation control LED will be in status green.<br />
The LCS has various sensors systems to allow a safe operation. The various sensor systems and their maintenance are documented under each of their own wikipage. <br />
<br />
[[Filter cleaning]]<br />
<br />
[[Flow Sensor]]<br />
<br />
[[Cooling System]]<br />
<br />
[[Alignment of the laser beam]]<br />
<br />
<br />
TBC<br />
<br />
Guide version 0.2</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1879Plenum2016-09-30T22:08:15Z<p>Ragnaroek23: </p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' October 9th<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
: [[20160814 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
<br />
; Handling of member access keys<br />
: Can we trust our members to not give away their keys to untrustworthy people? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; How do we handle unclear rules?<br />
: Proposition 1) Members make their own responsible decisions until the rule can be specified in the next plenum.<br />
: Proposition 2) Have the Vorstand decide for everyone until the next Plenum.<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Theft, openness and hospitality<br />
: The recent theft has shaken a lot of our members. Do we have to rethink our openness? Are the two even linked? <br />
: What can we do to not let this seep into our attitude towards our guests?<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Non-members alone in the space<br />
: What do we do when you're the last member to leave the space, but there are still other people present? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Commercial use of the laser cutter<br />
: Do we need some kind of special handling of commercial use of the laser cutter? <br />
: Do we even want that? Maybe other rates? Or no difference at all? Where is the boundary of fair use? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; Buying more stuff?<br />
: I'd like to play around with LoRaWAN, should we buy a LoRa Gateway for the space? Costs are about 300€. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 23:51, 7 September 2016 (CEST)<br />
<br />
; Tech literacy workshops for refugees with engineers without borders <br />
: My flatmate is an engineer without borders and asked me if we (Mumaland) could cooperate. They are planing to do a couple of tech workshops for refugees, and are looking for a space to host them. <br />
: I think its a great opportunity to extend some of our tried and tested openness to a new group of people, and to make interesting contacts to other nerds.<br />
[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:08, 1 October 2016 (CEST)<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=CNC_router_build/CNC_router_controller&diff=1877CNC router build/CNC router controller2016-09-20T22:46:50Z<p>Ragnaroek23: /* Check optotransmitter connection */</p>
<hr />
<div>= Goals =<br />
<br />
The controller board is where all the commands and status reports for the CNC mill come together. It's the first place that knows of problems, and should attempt to handle them as good as possible to avoid damage to the equipment. Also, it should integrate the different approaches to control preferred by different users.<br />
<br />
== Check optotransmitter connection ==<br />
<br />
The motor drivers contain internal optotransmitters to isolate the controller from the motor power. The connection from the controller board to the driver board is treated as unreliable, as these cables can be removed easily.<br />
<br />
When a signal is sent, the circuit verifies that the current is adequate for a LED (10mA to 30mA); when no signal is sent, the current should be zero.<br />
<br />
During startup, a quick selftest routine checks all outputs:<br />
<br />
# Activate ENABLE signal, verify current flow<br />
# Deactivate ENABLE signal, verify no current<br />
# Activate DIRECTION signal, verify current flow<br />
# Activate STEP signal, verify current flow<br />
# Deactivate STEP signal, verify no current<br />
# Deactivate DIRECTION signal, verify no current<br />
# Activate STEP signal, verify current flow<br />
# Deactivate STEP signal, verify no current<br />
<br />
This should test the connections, without moving the axis or changing the motor driver's microstep count (which may be important for the Z axis).<br />
<br />
== Check motor driver voltage/current ==<br />
<br />
The motor drivers should be powered while the machine is active, and current draw should be adequate for the given control inputs.<br />
<br />
A "power good" signal is generated using a zener diode and an optotransmitter in series. This allows a quick reaction when a fuse breaks.<br />
<br />
A more detailed voltage measurement is achieved with a voltage to PWM encoder, supplied by the measured voltage, isolated by an optotransmitter.<br />
<br />
The current is measured using a hall effect sensor and a voltage to PWM encoder.<br />
<br />
The current measurement is used to detect a broken connection to the motor behind the voltage sensor.<br />
<br />
== Check endstop switches ==<br />
<br />
When an endstop is hit, further movement in this direction should be stopped. A few steps might be acceptable for controlled deceleration.<br />
<br />
== Continuous position display ==<br />
<br />
The current position should always be displayed on a large display.<br />
<br />
== Zero position ==<br />
<br />
There should be a virtual zero position. When set, coordinate display becomes relative to this position.<br />
<br />
== Soft endstops ==<br />
<br />
There should be a way to set two positions on each axis to serve as the new min/max positions. The controller then reports the endstop as having been hit.<br />
<br />
== Input selection ==<br />
<br />
Control signals can be generated by internal controllers (Arduino compatible) or passed in from external interfaces. A switch interface allows selection of the signal source while the current source does not generate ENABLE signals and the emergency stop isn't active.<br />
<br />
== Spindle control ==<br />
<br />
The VFD controlling the spindle can be interfaced through RS-485. The controller should periodically poll the current speed for display and monitors error conditions.<br />
<br />
== Manual control ==<br />
<br />
A simple controller should be usable for quick commands as a separate input source.<br />
<br />
== Storage and communication ==<br />
<br />
The controller should provide SD card slots, Ethernet, USB, parallel and serial connections that can be connected to the internal controllers.<br />
<br />
= Implementation =<br />
<br />
The current state can be found on GitHub, at https://github.com/GyrosGeier/cnc.git .</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1853Plenum2016-09-02T22:29:57Z<p>Ragnaroek23: </p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' October 9th<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
: [[20160814 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
<br />
; Handling of member access keys<br />
: Can we trust our members to not give away their keys to untrustworthy people? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
; How do we handle unclear rules?<br />
: Proposition 1) Members make their own responsible decisions until the rule can be specified in the next plenum.<br />
: Proposition 2) Have the Vorstand decide for everyone until the next Plenum.<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Theft, openness and hospitality<br />
: The recent theft has shaken a lot of our members. Do we have to rethink our openness? Are the two even linked? <br />
: What can we do to not let this seep into our attitude towards our guests?<br />
: [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 00:29, 3 September 2016 (CEST)<br />
<br />
; Commercial use of the laser cutter<br />
: Do we need some kind of special handling of commercial use of the laser cutter? <br />
: Do we even want that? Maybe other rates? Or no difference at all? Where is the boundary of fair use? <br />
: --[[User:Tarwin|Tarwin]] ([[User talk:Tarwin|talk]]) 17:12, 30 August 2016 (CEST)<br />
<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1742Plenum2016-06-09T17:10:33Z<p>Ragnaroek23: </p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' June 12th, at 4pm<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
: [[20160124 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
<br />
; Job offers etc.<br />
: We tend to get a lot of job offers etc. from random people, sometimes by mail or else. Is anyone interested in those, should we forward them to the discussion ML, ...? Or just dump them? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 14:43, 30 January 2016 (CET)<br />
<br />
; Hackathons junior team<br />
: It would be awesome to form a munich maker lab juniors hackathon team. [[User:Jan|Jan]]<br />
<br />
; Mumaland Hackathons<br />
: The idea of our very own mumaland hackathons has been floating around for a while, let's talk about it. We'll be getting 4 more HTC Vives, so VR might be a good topic. [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:25, 9 June 2016 (CEST)<br />
<br />
; Chaos<br />
: Some parts of space are quite messy again. Thinking about the area in front of our door, or the member shelves in particular, but there's also some more generic chaos going on. Let's talk about how to handle this, what we can change, and how we make sure it doesn't get all messy right again. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 11:16, 8 June 2016 (CEST)<br />
<br />
; Chaos and annoyance<br />
: I'm getting really annoyed with the topic "chaos @mumaland". Parts is due to the repetitive nature of the topic (we talk about it almost every Plenum since incorporation), parts due to the way people complain. I'd like to talk about how it might impact the free and open nature of our hackerspace and propose a better way to deal with it. --[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 16:53, 9 June 2016 (CEST)<br />
<br />
; BioHacking?<br />
: We've received a few requests from people wanting to explore the world of BioHacking. And while a lot of that requires a complicated laboratory and stuff, as we learned from Marc ([http://hackteria.org/workshops/make-munich-presents-biohacker/ his talk]), there's also quite a bit that you can do without it. I want to briefly talk about possibilities we have to support the development here, and get a feel for who is interested in joining these efforts --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 11:16, 8 June 2016 (CEST)<br />
<br />
; Makeria<br />
: Make Munich has a PopUp store on Maximilianstraße, and we can show off some stuff. They plan to have some important people visiting by the end of next week, so let's get some stuff there! Who has something we could take over there? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 13:16, 8 June 2016 (CEST)<br />
<br />
; Hedohackerspace<br />
: As some of you might know, I organized a temporary hackerspace at the [http://worldcongress.hedonist-international.org world congress of the hedonist international]. It was a great success, so they invited me to do it again. Next year, I'd like get a couple of members together and do it under a Mumaland flag. --[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 16:53, 9 June 2016 (CEST)<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1741Plenum2016-06-09T16:25:13Z<p>Ragnaroek23: </p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' June 12th, at 4pm<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
: [[20160124 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
<br />
; Job offers etc.<br />
: We tend to get a lot of job offers etc. from random people, sometimes by mail or else. Is anyone interested in those, should we forward them to the discussion ML, ...? Or just dump them? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 14:43, 30 January 2016 (CET)<br />
<br />
; Hackathons junior team<br />
: It would be awesome to form a munich maker lab juniors hackathon team. [[User:Jan|Jan]]<br />
; Mumaland Hackathons<br />
: The idea of our very own mumaland hackathons has been floating around for a while, let's talk about it. [[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 18:25, 9 June 2016 (CEST)<br />
<br />
; Chaos<br />
: Some parts of space are quite messy again. Thinking about the area in front of our door, or the member shelves in particular, but there's also some more generic chaos going on. Let's talk about how to handle this, what we can change, and how we make sure it doesn't get all messy right again. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 11:16, 8 June 2016 (CEST)<br />
<br />
; Chaos and annoyance<br />
: I'm getting really annoyed with the topic "chaos @mumaland". Parts is due to the repetitive nature of the topic (we talk about it almost every Plenum since incorporation), parts due to the way people complain. I'd like to talk about how it might impact the free and open nature of our hackerspace and propose a better way to deal with it. --[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 16:53, 9 June 2016 (CEST)<br />
<br />
; BioHacking?<br />
: We've received a few requests from people wanting to explore the world of BioHacking. And while a lot of that requires a complicated laboratory and stuff, as we learned from Marc ([http://hackteria.org/workshops/make-munich-presents-biohacker/ his talk]), there's also quite a bit that you can do without it. I want to briefly talk about possibilities we have to support the development here, and get a feel for who is interested in joining these efforts --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 11:16, 8 June 2016 (CEST)<br />
<br />
; Makeria<br />
: Make Munich has a PopUp store on Maximilianstraße, and we can show off some stuff. They plan to have some important people visiting by the end of next week, so let's get some stuff there! Who has something we could take over there? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 13:16, 8 June 2016 (CEST)<br />
<br />
; Hedohackerspace<br />
: As some of you might know, I organized a temporary hackerspace at the [http://worldcongress.hedonist-international.org world congress of the hedonist international]. It was a great success, so they invited me to do it again. Next year, I'd like get a couple of members together and do it under a Mumaland flag. --[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 16:53, 9 June 2016 (CEST)<br />
<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Plenum&diff=1740Plenum2016-06-09T14:58:54Z<p>Ragnaroek23: /* Topics for the next Plenum */</p>
<hr />
<div>The Plenum is a soon-to-be regular meeting of all people involved with the space to talk about things, and decide stuff.<br />
<br />
If you have stuff to add, please do so, but sign your points with your name.<br />
<br />
'''Next Plenum: ''' June 12th, at 4pm<br />
<br />
<br />
== Topics for the next Plenum ==<br />
; What are you currently working on?<br />
: Tell everyone about your current projects.<br />
<br />
; Thank you<br />
: Let's say thank you to those who did some awesome stuff for the space since the last plenum<br />
<br />
; Stuff from the past<br />
: What was discussed at the last Plenum? What's the current status on those things?<br />
: [[20160124 Plenum]]<br />
<br />
; Anything you don't feel comfortable with in the space? What would you like to change or to be changed?<br />
: Is there anything that's bothering you?<br />
<br />
; Job offers etc.<br />
: We tend to get a lot of job offers etc. from random people, sometimes by mail or else. Is anyone interested in those, should we forward them to the discussion ML, ...? Or just dump them? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 14:43, 30 January 2016 (CET)<br />
<br />
; Hackathons<br />
: It would be awesome to form a munich maker lab juniors hackathon team. [[User:Jan|Jan]]<br />
<br />
; Chaos<br />
: Some parts of space are quite messy again. Thinking about the area in front of our door, or the member shelves in particular, but there's also some more generic chaos going on. Let's talk about how to handle this, what we can change, and how we make sure it doesn't get all messy right again. --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 11:16, 8 June 2016 (CEST)<br />
<br />
; Chaos and annoyance<br />
: I'm getting really annoyed with the topic "chaos @mumaland". Parts is due to the repetitive nature of the topic (we talk about it almost every Plenum since incorporation), parts due to the way people complain. I'd like to talk about how it might impact the free and open nature of our hackerspace and propose a better way to deal with it. --[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 16:53, 9 June 2016 (CEST)<br />
<br />
; BioHacking?<br />
: We've received a few requests from people wanting to explore the world of BioHacking. And while a lot of that requires a complicated laboratory and stuff, as we learned from Marc ([http://hackteria.org/workshops/make-munich-presents-biohacker/ his talk]), there's also quite a bit that you can do without it. I want to briefly talk about possibilities we have to support the development here, and get a feel for who is interested in joining these efforts --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 11:16, 8 June 2016 (CEST)<br />
<br />
; Makeria<br />
: Make Munich has a PopUp store on Maximilianstraße, and we can show off some stuff. They plan to have some important people visiting by the end of next week, so let's get some stuff there! Who has something we could take over there? --[[User:Tiefpunkt|Tiefpunkt]] ([[User talk:Tiefpunkt|talk]]) 13:16, 8 June 2016 (CEST)<br />
<br />
;Hedohackerspace<br />
: As some of you might know, I organized a temporary hackerspace at the [http://worldcongress.hedonist-international.org world congress of the hedonist international]. It was a great success, so they invited me to do it again. Next year, I'd like get a couple of members together and do it under a Mumaland flag. --[[User:Ragnaroek23|Ragnaroek23]] ([[User talk:Ragnaroek23|talk]]) 16:53, 9 June 2016 (CEST)<br />
[[Category:Plenum]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1732Archive:Hedohackerspace2016-05-23T16:36:48Z<p>Ragnaroek23: /* Ausleihliste */</p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkiste mit<br />
** Lötkolben x6<br />
** Lötkolbenständer+schwämmchen x4<br />
** Vollständige Lötstationen x4<br />
** Kabelzangen x4<br />
** Lötzinn x7<br />
** FTDI?<br />
* Breadboards x 3<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* Multimeter (Severin)<br />
* kleines Multimeter (Jan)<br />
* Fritzing creator kit<br />
* Board marker x<br />
* Schraubenzieher & Bits-set, schwarzrot<br />
* Messschieber<br />
* Kabelzangen x2<br />
* Mehrzweckzange<br />
* kleine Metallsäge<br />
* Entlötpumpen x2<br />
* Cutter x4<br />
* Scheren x2<br />
* Schraubzwingen x2<br />
* Zollstock x1<br />
* USB-Stick x2<br />
* Eddinge x3<br />
* Bohrlochmarker x1<br />
* 5 Arduino Nano (Berni)<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1731Archive:Hedohackerspace2016-05-23T16:19:19Z<p>Ragnaroek23: /* Ausleihliste */</p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkiste mit<br />
** Lötkolben x6<br />
** Lötkolbenständer+schwämmchen x4<br />
** Vollständige Lötstationen x4<br />
** Kabelzangen x4<br />
** Lötzinn x7<br />
** FTDI?<br />
* Breadboards x 3<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* Multimeter (Severin)<br />
* kleines Multimeter (Jan)<br />
* Fritzing creator kit<br />
* Board marker x<br />
* Schraubenzieher & Bits-set, schwarzrot<br />
* Messschieber<br />
* Kabelzangen x2<br />
* Entlötpumpen x2<br />
* Cutter x4<br />
* Scheren x2<br />
* Schraubzwingen x2<br />
* Zollstock x1<br />
* USB-Stick x2<br />
* Eddinge x3<br />
* Bohrlochmarker x1<br />
* 5 Arduino Nano (Berni)<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1730Archive:Hedohackerspace2016-05-23T15:11:46Z<p>Ragnaroek23: </p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkiste mit<br />
** Lötkolben x6<br />
** Lötkolbenständer+schwämmchen x4<br />
** Vollständige Lötstationen x4<br />
** Kabelzangen x4<br />
** Lötzinn x7<br />
** FTDI?<br />
* Breadboards x 3<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* kleines Multimeter<br />
* Fritzing creator kit<br />
* Board marker x<br />
* Schraubenzieher & Bits-set, schwarzrot<br />
* Messschieber<br />
* Kabelzangen x2<br />
* Entlötpumpen x2<br />
* Cutter x4<br />
* Scheren x2<br />
* Schraubzwingen x2<br />
* Zollstock x1<br />
* USB-Stick x2<br />
* Eddinge x3<br />
* Bohrlochmarker x1<br />
* 5 Arduino Nano (Berni)<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1729Archive:Hedohackerspace2016-05-23T10:26:05Z<p>Ragnaroek23: /* Ausleihliste */</p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkiste mit<br />
** Lötkolben x6<br />
** Lötkolbenständer+schwämmchen x4<br />
** Vollständige Lötstationen x4<br />
** Kabelzangen x4<br />
** Lötzinn x7<br />
** FTDI?<br />
* Breadboards x 3<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* kleines Multimeter<br />
* Fritzing creator kit<br />
* Board marker x<br />
* Schraubenzieher & Bits-set, schwarzrot<br />
* Messschieber<br />
* Kabelzangen x2<br />
* Entlötpumpen x2<br />
* Cutter x4<br />
* Scheren x2<br />
* Schraubzwingen x2<br />
* Zollstock x1<br />
* USB-Stick x2<br />
* Eddinge x3<br />
* Bohrlochmarker x1<br />
<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1728Archive:Hedohackerspace2016-05-23T10:25:35Z<p>Ragnaroek23: /* Ausleihliste */</p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkiste<br />
** Lötkolben x6<br />
** Lötkolbenständer+schwämmchen x4<br />
** Vollständige Lötstationen x4<br />
** Kabelzangen x4<br />
** Lötzinn x7<br />
* Breadboards x 3<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* kleines Multimeter<br />
* Fritzing creator kit<br />
* Board marker x<br />
* Schraubenzieher & Bits-set, schwarzrot<br />
* Messschieber<br />
* Kabelzangen x2<br />
* Entlötpumpen x2<br />
* Cutter x4<br />
* Scheren x2<br />
* Schraubzwingen x2<br />
* Zollstock x1<br />
* USB-Stick x2<br />
* Eddinge x3<br />
* Bohrlochmarker x1<br />
<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1727Archive:Hedohackerspace2016-05-23T00:51:45Z<p>Ragnaroek23: /* Ausleihliste */</p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkolben x 10<br />
* Breadboards x 3<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* kleines Multimeter<br />
* Fritzing creator kit<br />
* Board marker x<br />
* Schraubenzieher & Bits-set, schwarzrot<br />
* Messschieber<br />
* Kabelzangen x2<br />
* Entlötpumpen x2<br />
* Cutter x4<br />
* Scheren x2<br />
* Schraubzwingen x2<br />
* Zollstock x1<br />
* USB-Stick x2<br />
* Eddinge x3<br />
* Bohrlochmarker x1<br />
<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Hedohackerspace&diff=1726Archive:Hedohackerspace2016-05-23T00:25:20Z<p>Ragnaroek23: Created page with "== Event == Karim fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären..."</p>
<hr />
<div>== Event ==<br />
[[User:ragnaroek23|Karim]] fährt auf den [http://worldcongress.hedonist-international.org/ Weltkongress der Hedonistischen Internationalen] wo er ein temporären Hackerspace aufbaut, mit dem Ziel, Hippies die Freuden der Technologie zu lehren.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Ausleihliste ==<br />
Hier die Ausleihliste ausm Mumaland<br />
* Lötkolben x 10<br />
* Breadboards x 1<br />
* 32-in-1 Screwdrivers set<br />
* Kohleschichtwiderstandssortiment<br />
* Schrumpfschläuche<br />
* kleines Multimeter<br />
* Fritzing creator kit<br />
<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Frag_den_Anwalt&diff=1691Archive:Frag den Anwalt2016-04-03T13:33:36Z<p>Ragnaroek23: </p>
<hr />
<div>== Event ==<br />
Frank Stiegler aka Netpoet ist ein langjähriges Mitglied der Demoszene und ein auf IT-Recht spezialisierter Anwalt.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Fragen ==<br />
<br />
=== Datenschutz ===<br />
Darf ne Excelliste mit Geburtstagslisten offen auf nen internen Sambashare liegen?<br />
<br />
Ohne Einwilligung aller Betroffenen, nein.<br />
<br />
=== Domainrecht ===<br />
Kann man Web Domains kaufen, deren URL mit der Domain-Endung einen Markennamen ergeben(Beispiel: boe.ing)?<br />
<br />
'''Sichern ja, behalten nein.''' Eingetragene Marken und Namensrechte schützen ebenfalls Domains.<br />
Mit etwas Glück kann es sein, dass die Firmen trotzdem etwas € zahlen, da klagen länger dauert, und teuerer ist.<br />
<br />
Bei Namens- und Markenkonflikten, fragen Sie ihren Anwalt.<br />
<br />
'''Weitere Infos:'''<br />
<br />
Markennamen werden nur für bestimmte Geschäftsfelder eingetragen.<br />
Städte haben auch Rechte auf ihre Namen.<br />
Achtung! Personen haben Namensrecht, diese können ebenfalls mit Markenrechten kollidieren.<br />
<br />
=== Mängelhaftung für Software ===<br />
<br />
Siehe [https://www.youtube.com/watch?v=oIwRwm6x0Lc Franks Vortrag]<br />
<br />
=== Software ===<br />
Ist es zulässig, eine Software für limitierte Rechneranzahl zu verkaufen und nur auf bestimmten Rechnern lauffähig zu machen?<br />
'''Ja'''<br />
<br />
=== Produkthaftung bei Elektronik ===<br />
'''Verkauf an Endnutzer''' haftet man erstmal selbst, egal was man verbaut.<br />
In der Theorie kann zwar der Bauteilehersteller in Regress genommen werdemn, das ändert aber nix daran, dass man erstmal selbst haften musst.<br />
<br />
Wenn der Hersteller im Vorfeld eine Freistellungsklausel unterschreibt, können die Kosten allerdings doch durchgeschoben werden. (Achtung, uU will der Hersteller dann die Prozessführung bestimmen.)<br />
<br />
'''Tipp:''' Netzteil nicht mit verkaufen.<br />
<br />
'''Prototypen''':<br />
Wenn es klar ist das es sich um Prototypen handelt, gelten die Haftungen nicht mehr.<br />
Bei Verkauf an Privatpersonen/Endnutzer könnte es allerdings Probleme geben (→ überprüfen)<br />
<br />
=== AGBs ===<br />
Siehe [https://www.youtube.com/watch?v=oIwRwm6x0Lc Franks Vortrag]<br />
<br />
AGBs dürfen nicht unangemessen benachteiligend sein, nicht mehrdeutig sein, nicht unverständlich/intransparent sein.<br />
<br />
=== Umgang mit Anwalten ===<br />
Es hilft, wenn man sich vorher mit Google uä. schlau, zB. passende Vorlagen und Bausteine für den gewünschten Vertrag selber raussucht, weil man dann schon besser weiss was man eigentlich will. Der Anwalt kann sich dann die Zeit sparen, den Rechtrahmen zu erfragen.<br />
<br />
== Kontakt ==<br />
'''Frank Stiegler''', Rechtsanwalt<br />
<br />
Martin-May-Straße 10, D-60594 Frankfurt<br />
UStID: DE243106230<br />
zugelassen bei der RAK Frankfurt am Main<br />
<br />
'''Fon, Fax:'''<br />
+49 69 968660-84/-83<br />
<br />
'''Mobil:'''<br />
+49 176 20513376<br />
<br />
'''E-Mail:'''<br />
stiegler@stiegler-legal.com (PGP) <br />
<br />
[[Category:Events]]</div>Ragnaroek23https://wiki.munichmakerlab.de/index.php?title=Archive:Frag_den_Anwalt&diff=1690Archive:Frag den Anwalt2016-04-03T13:33:00Z<p>Ragnaroek23: </p>
<hr />
<div>== Event ==<br />
Frank Stiegler aka Netpoet ist ein langjähriges Mitglied der Demoszene und ein auf IT-Recht spezialisierter Anwalt.<br />
<br />
Hier die Zusammenfassung von seiner Fragerunde am 03.04.2016, alles natürlich ohne Gewähr.<br />
<br />
== Fragen ==<br />
<br />
=== Datenschutz ===<br />
Darf ne Excelliste mit Geburtstagslisten offen auf nen internen Sambashare liegen?<br />
<br />
Ohne Einwilligung aller Betroffenen, nein.<br />
<br />
=== Domainrecht ===<br />
Kann man Web Domains kaufen, deren URL mit der Domain-Endung einen Markennamen ergeben(Beispiel: boe.ing)?<br />
<br />
'''Sichern ja, behalten nein.''' Eingetragene Marken und Namensrechte schützen ebenfalls Domains.<br />
Mit etwas Glück kann es sein, dass die Firmen trotzdem etwas € zahlen, da klagen länger dauert, und teuerer ist.<br />
<br />
Bei Namens- und Markenkonflikten, fragen Sie ihren Anwalt.<br />
<br />
'''Weitere Infos:'''<br />
<br />
Markennamen werden nur für bestimmte Geschäftsfelder eingetragen.<br />
Städte haben auch Rechte auf ihre Namen.<br />
Achtung! Personen haben Namensrecht, diese können ebenfalls mit Markenrechten kollidieren.<br />
<br />
=== Mängelhaftung für Software ===<br />
<br />
Siehe [https://www.youtube.com/watch?v=oIwRwm6x0Lc Franks Vortrag]<br />
<br />
=== Software ===<br />
Ist es zulässig, eine Software für limitierte Rechneranzahl zu verkaufen und nur auf bestimmten Rechnern lauffähig zu machen?<br />
'''Ja'''<br />
<br />
=== Produkthaftung bei Elektronik ===<br />
'''Verkauf an Endnutzer''' haftet man erstmal selbst, egal was man verbaut.<br />
In der Theorie kann zwar der Bauteilehersteller in Regress genommen werdemn, das ändert aber nix daran, dass man erstmal selbst haften musst.<br />
<br />
Wenn der Hersteller im Vorfeld eine Freistellungsklausel unterschreibt, können die Kosten allerdings doch durchgeschoben werden. (Achtung, uU will der Hersteller dann die Prozessführung bestimmen.)<br />
<br />
'''Tipp:''' Netzteil nicht mit verkaufen.<br />
<br />
'''Prototypen''':<br />
Wenn es klar ist das es sich um Prototypen handelt, gelten die Haftungen nicht mehr.<br />
Bei Verkauf an Privatpersonen/Endnutzer könnte es allerdings Probleme geben (→ überprüfen)<br />
<br />
=== AGBs ===<br />
Siehe [https://www.youtube.com/watch?v=oIwRwm6x0Lc Franks Vortrag]<br />
<br />
AGBs dürfen nicht unangemessen benachteiligend sein, nicht mehrdeutig sein, nicht unverständlich/intransparent sein.<br />
<br />
=== Umgang mit Anwalten ===<br />
Es hilft, wenn man sich vorher mit Google uä. schlau, zB. passende Vorlagen und Bausteine für den gewünschten Vertrag selber raussucht, weil man dann schon besser weiss was man eigentlich will. Der Anwalt kann sich dann die Zeit sparen, den Rechtrahmen zu erfragen.<br />
<br />
== Kontakt ==<br />
Frank Stiegler, Rechtsanwalt<br />
<br />
Martin-May-Straße 10, D-60594 Frankfurt<br />
UStID: DE243106230<br />
zugelassen bei der RAK Frankfurt am Main<br />
<br />
'''Fon, Fax:'''<br />
+49 69 968660-84/-83<br />
<br />
'''Mobil:'''<br />
+49 176 20513376<br />
<br />
'''E-Mail:'''<br />
stiegler@stiegler-legal.com (PGP) <br />
<br />
[[Category:Events]]</div>Ragnaroek23